kernel/linux.git/include/drm, branch v6.2.6

drm/display/dp_mst: Handle old/new payload states in drm_dp_remove_payload()

2023-03-11T12:50:49+00:00

commit e761cc20946a0094df71cb31a565a6a0d03bd8be upstream. Atm, drm_dp_remove_payload() uses the same payload state to both get the vc_start_slot required for the payload removal DPCD message and to deduct time_slots from vc_start_slot of all payloads after the one being removed. The above isn't always correct, as vc_start_slot must be the up-to-date version contained in the new payload state, but time_slots must be the one used when the payload was previously added, contained in the old payload state. The new payload's time_slots can change vs. the old one if the current atomic commit changes the corresponding mode. This patch let's drivers pass the old and new payload states to drm_dp_remove_payload(), but keeps these the same for now in all drivers not to change the behavior. A follow-up i915 patch will pass in that driver the correct old and new states to the function. Cc: Lyude Paul Cc: Ville Syrjälä Cc: Ben Skeggs Cc: Karol Herbst Cc: Harry Wentland Cc: Alex Deucher Cc: Wayne Lin Cc: stable@vger.kernel.org # 6.1 Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ville Syrjälä Reviewed-by: Lyude Paul Acked-by: Lyude Paul Acked-by: Daniel Vetter Acked-by: Wayne Lin Acked-by: Jani Nikula Signed-off-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-2-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman

drm/display/dp_mst: Add drm_atomic_get_old_mst_topology_state()

2023-03-11T12:50:48+00:00

commit 9ffdb67af0ee625ae127711845532f670cc6a4e7 upstream. Add a function to get the old MST topology state, required by a follow-up i915 patch. While at it clarify the code comment of drm_atomic_get_new_mst_topology_state() and add _new prefix to the new state pointer to remind about its difference from the old state. v2: Use old_/new_ prefixes for the state pointers. (Ville) Cc: Lyude Paul Cc: Ville Syrjälä Cc: stable@vger.kernel.org # 6.1 Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ville Syrjälä Reviewed-by: Lyude Paul Acked-by: Lyude Paul Acked-by: Daniel Vetter Acked-by: Wayne Lin Acked-by: Jani Nikula Signed-off-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-3-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman

drm/drm_print: correct format problem

2023-03-10T08:29:17+00:00

[ Upstream commit d987150b539271b0394f24c1c648d2846662adb4 ] [why & how] __drm_dbg() parameter set format is wrong and not aligned with the format under CONFIG_DRM_USE_DYNAMIC_DEBUG is on. Fix it. Signed-off-by: Wayne Lin Signed-off-by: Harry Wentland Acked-by: Harry Wentland Reviewed-by: Lyude Paul Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/mipi-dsi: Fix byte order of 16-bit DCS set/get brightness

2023-03-10T08:28:31+00:00

[ Upstream commit c9d27c6be518b4ef2966d9564654ef99292ea1b3 ] The MIPI DCS specification demands that brightness values are sent in big endian byte order. It also states that one parameter (i.e. one byte) shall be sent/received for 8 bit wide values, and two parameters shall be used for values that are between 9 and 16 bits wide. Add new functions to properly handle 16-bit brightness in big endian, since the two 8- and 16-bit cases are distinct from each other. [richard: use separate functions instead of switch/case] [richard: split into 16-bit component] Fixes: 1a9d759331b8 ("drm/dsi: Implement DCS set/get display brightness") Signed-off-by: Daniel Mentz Link: https://android.googlesource.com/kernel/msm/+/754affd62d0ee268c686c53169b1dbb7deac8550 [richard: fix 16-bit brightness_get] Signed-off-by: Richard Acayan Tested-by: Caleb Connolly Reviewed-by: Neil Armstrong Reviewed-by: Sam Ravnborg Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-2-mailingradian@gmail.com Signed-off-by: Sasha Levin

drm/client: fix circular reference counting issue

2023-02-07T08:42:56+00:00

We reference dump buffers both by their handle as well as their object. The problem is now that when anybody iterates over the DRM framebuffers and exports the underlying GEM objects through DMA-buf we run into a circular reference count situation. The result is that the fbdev handling holds the GEM handle preventing the DMA-buf in the GEM object to be released. This DMA-buf in turn holds a reference to the driver module which on unload would release the fbdev. Break that loop by releasing the handle as soon as the DRM framebuffer object is created. The DRM framebuffer and the DRM client buffer structure still hold a reference to the underlying GEM object preventing its destruction. Signed-off-by: Christian König Fixes: c76f0f7cb546 ("drm: Begin an API for in-kernel clients") Cc: Reviewed-by: Thomas Zimmermann Tested-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20230126102814.8722-1-christian.koenig@amd.com

drm/fb-helper: Use a per-driver FB deferred I/O handler

2023-01-24T10:13:08+00:00

The DRM fbdev emulation layer sets the struct fb_info .fbdefio field to a struct fb_deferred_io pointer, that is shared across all drivers that use the generic drm_fbdev_generic_setup() helper function. It is a problem because the fbdev core deferred I/O logic assumes that the struct fb_deferred_io data is not shared between devices, and it's stored there state such as the list of pages touched and a mutex that is use to synchronize between the fb_deferred_io_track_page() function that track the dirty pages and fb_deferred_io_work() workqueue handler doing the actual deferred I/O. The latter can lead to the following error, since it may happen that two drivers are probed and then one is removed, which causes the mutex bo be destroyed and not existing anymore by the time the other driver tries to grab it for the fbdev deferred I/O logic: [ 369.756553] ------------[ cut here ]------------ [ 369.756604] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 369.756631] WARNING: CPU: 2 PID: 1023 at kernel/locking/mutex.c:582 __mutex_lock+0x348/0x424 [ 369.756744] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ip v6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr btsdio bluetooth sunrpc brcmfmac snd_soc_hdmi_codec cpufreq_dt cfg80211 vfat fat vc4 rfkill brcmutil raspberrypi_cpufreq i2c_bcm2835 iproc_rng200 bcm2711_thermal snd_soc_core snd_pcm_dmaen gine leds_gpio nvmem_rmem joydev hid_cherry uas usb_storage gpio_raspberrypi_exp v3d snd_pcm raspberrypi_hwmon gpu_sched bcm2835_wdt broadcom bcm_phy_lib snd_timer genet snd mdio_bcm_unimac clk_bcm2711_dvp soundcore drm_display_helper pci e_brcmstb cec ip6_tables ip_tables fuse [ 369.757400] CPU: 2 PID: 1023 Comm: fbtest Not tainted 5.19.0-rc6+ #94 [ 369.757455] Hardware name: raspberrypi,4-model-b Raspberry Pi 4 Model B Rev 1.4/Raspberry Pi 4 Model B Rev 1.4, BIOS 2022.10 10/01/2022 [ 369.757538] pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 369.757596] pc : __mutex_lock+0x348/0x424 [ 369.757635] lr : __mutex_lock+0x348/0x424 [ 369.757672] sp : ffff80000953bb00 [ 369.757703] x29: ffff80000953bb00 x28: ffff17fdc087c000 x27: 0000000000000002 [ 369.757771] x26: ffff17fdc349f9b0 x25: fffffc5ff72e0100 x24: 0000000000000000 [ 369.757838] x23: 0000000000000000 x22: 0000000000000002 x21: ffffa618df636f10 [ 369.757903] x20: ffff80000953bb68 x19: ffffa618e0f18138 x18: 0000000000000001 [ 369.757968] x17: 0000000020000000 x16: 0000000000000002 x15: 0000000000000000 [ 369.758032] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47 [ 369.758097] x11: 00000000ffffdfff x10: ffffa618e0c79f88 x9 : ffffa618de472484 [ 369.758162] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 00000000000affa8 [ 369.758227] x5 : 0000000000001fff x4 : 0000000000000000 x3 : 0000000000000027 [ 369.758292] x2 : 0000000000000001 x1 : ffff17fdc087c000 x0 : 0000000000000028 [ 369.758357] Call trace: [ 369.758383] __mutex_lock+0x348/0x424 [ 369.758420] mutex_lock_nested+0x4c/0x5c [ 369.758459] fb_deferred_io_mkwrite+0x78/0x1d8 [ 369.758507] do_page_mkwrite+0x5c/0x19c [ 369.758550] wp_page_shared+0x70/0x1a0 [ 369.758590] do_wp_page+0x3d0/0x510 [ 369.758628] handle_pte_fault+0x1c0/0x1e0 [ 369.758670] __handle_mm_fault+0x250/0x380 [ 369.758712] handle_mm_fault+0x17c/0x3a4 [ 369.758753] do_page_fault+0x158/0x530 [ 369.758792] do_mem_abort+0x50/0xa0 [ 369.758831] el0_da+0x78/0x19c [ 369.758864] el0t_64_sync_handler+0xbc/0x150 [ 369.758904] el0t_64_sync+0x190/0x194 [ 369.758942] irq event stamp: 11395 [ 369.758973] hardirqs last enabled at (11395): [] __up_console_sem+0x74/0x80 [ 369.759042] hardirqs last disabled at (11394): [] __up_console_sem+0x6c/0x80 [ 369.760554] softirqs last enabled at (11392): [] __do_softirq+0x4c4/0x6b8 [ 369.762060] softirqs last disabled at (11383): [] __irq_exit_rcu+0x104/0x214 [ 369.763564] ---[ end trace 0000000000000000 ]--- Fixes: d536540f304c ("drm/fb-helper: Add generic fbdev emulation .fb_probe function") Signed-off-by: Javier Martinez Canillas Reviewed-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20230121192418.2814955-4-javierm@redhat.com

drm/drm_vma_manager: Add drm_vma_node_allow_once()

2023-01-19T13:16:55+00:00

Currently there is no easy way for a drm driver to safely check and allow drm_vma_offset_node for a drm file just once. Allow drm drivers to call non-refcounted version of drm_vma_node_allow() so that a driver doesn't need to keep track of each drm_vma_node_allow() to call subsequent drm_vma_node_revoke() to prevent memory leak. Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Thomas Zimmermann Cc: David Airlie Cc: Daniel Vetter Cc: Tvrtko Ursulin Cc: Andi Shyti Suggested-by: Chris Wilson Signed-off-by: Nirmoy Das Reviewed-by: Tvrtko Ursulin Reviewed-by: Andi Shyti Link: https://lore.kernel.org/r/20230117175236.22317-1-nirmoy.das@intel.com Signed-off-by: Maxime Ripard

Merge drm/drm-fixes into drm-misc-fixes

2023-01-03T07:32:12+00:00

Let's start the fixes cycle. Signed-off-by: Maxime Ripard

drm/plane-helper: Add the missing declaration of drm_atomic_state

2022-12-16T09:23:11+00:00

Add the missing declaration of struct drm_atomic_state to fix the compile error below: error: 'struct drm_atomic_state' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] Signed-off-by: Ma Jun Reviewed-by: Thomas Zimmermann Signed-off-by: Thomas Zimmermann Fixes: 8401bd361f59 ("drm/plane-helper: Add a drm_plane_helper_atomic_check() helper") Cc: Javier Martinez Canillas Cc: Thomas Zimmermann Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: David Airlie Cc: Daniel Vetter Cc: dri-devel@lists.freedesktop.org Cc: # v6.1+ Link: https://patchwork.freedesktop.org/patch/msgid/20221216030526.1335609-1-majun@amd.com

Merge tag 'drm-misc-next-fixes-2022-12-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2022-12-09T01:53:52+00:00

Some deferred-io and damage worker reworks revert and make a fb function static Signed-off-by: Dave Airlie From: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20221208084040.yw4zavsjd25qsltf@houat