kernel/linux.git/include/drm/drm_gem.h, branch v6.1.168

drm/msm/gem: Prevent blocking within shrinker loop

2023-03-22T12:33:39+00:00

[ Upstream commit 9630b585b607bd26f505d34620b14d75b9a5af7d ] Consider this scenario: 1. APP1 continuously creates lots of small GEMs 2. APP2 triggers `drop_caches` 3. Shrinker starts to evict APP1 GEMs, while APP1 produces new purgeable GEMs 4. msm_gem_shrinker_scan() returns non-zero number of freed pages and causes shrinker to try shrink more 5. msm_gem_shrinker_scan() returns non-zero number of freed pages again, goto 4 6. The APP2 is blocked in `drop_caches` until APP1 stops producing purgeable GEMs To prevent this blocking scenario, check number of remaining pages that GPU shrinker couldn't release due to a GEM locking contention or shrinking rejection. If there are no remaining pages left to shrink, then there is no need to free up more pages and shrinker may break out from the loop. This problem was found during shrinker/madvise IOCTL testing of virtio-gpu driver. The MSM driver is affected in the same way. Reviewed-by: Rob Clark Reviewed-by: Thomas Zimmermann Fixes: b352ba54a820 ("drm/msm/gem: Convert to using drm_gem_lru") Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/all/20230108210445.3948344-2-dmitry.osipenko@collabora.com/ Signed-off-by: Sasha Levin

Merge tag 'drm-msm-next-2022-09-22' of https://gitlab.freedesktop.org/drm/msm into drm-next

2022-09-28T01:35:25+00:00

msm-next for v6.1 DPU: - simplified VBIF configuration - cleaned up CTL interfaces to accept indices rather than flush masks DSI: - removed unused msm_display_dsc_config struct - switch regulator calls to new bulk API - switched to use PANEL_BRIDGE for directly attached panels DSI PHY: - converted drivers to use parent_hws instead of parent_names DP: - cleaned up pixel_rate handling HDMI PHY: - turned hdmi-phy-8996 into OF clk provider core: - misc dt-bindings fixes - choose eDP as primary display if it's available - support getting interconnects from either the mdss or the mdp5/dpu device nodes gpu+gem: - Shrinker + LRU re-work: - adds a shared GEM LRU+shrinker helper and moves msm over to that - reduces lock contention between retire and submit by avoiding the need to acquire obj lock in retire path (and instead using resv seeing obj's busyness in the shrinker - fix reclaim vs submit issues - GEM fault injection for triggering userspace error paths - Map/unmap optimization - Improved robustness for a6xx GPU recovery Signed-off-by: Dave Airlie From: Rob Clark Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsrfrr9v1oR9S4oYfOs9jm=jbKQiwPBTrCRHrjYerJJFA@mail.gmail.com

drm/gem: Add LRU/shrinker helper

2022-08-27T16:32:45+00:00

Add a simple LRU helper to assist with driver's shrinker implementation. It handles tracking the number of backing pages associated with a given LRU, and provides a helper to implement shrinker_scan. A driver can use multiple LRU instances to track objects in various states, for example a dontneed LRU for purgeable objects, a willneed LRU for evictable objects, and an unpinned LRU for objects without backing pages. All LRUs that the object can be moved between must share a single lock. v2: lockdep_assert_held() instead of WARN_ON(!mutex_is_locked()) v3: make drm_gem_lru_move_tail_locked() static until there is a user Cc: Daniel Vetter Cc: Thomas Zimmermann Cc: Dmitry Osipenko Signed-off-by: Rob Clark Reviewed-by: Dmitry Osipenko Patchwork: https://patchwork.freedesktop.org/patch/496128/ Link: https://lore.kernel.org/r/20220802155152.1727594-10-robdclark@gmail.com

drm/gem: rename GEM CMA helpers to GEM DMA helpers

2022-08-03T16:31:49+00:00

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg Acked-by: Thomas Zimmermann Reviewed-by: Laurent Pinchart Signed-off-by: Danilo Krummrich Reviewed-by: Liviu Dudau #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com

drm: Add DRM_GEM_FOPS

2022-07-05T03:01:11+00:00

The DEFINE_DRM_GEM_FOPS() helper is a bit limiting if a driver wants to provide additional file ops, like show_fdinfo(). v2: Split out DRM_GEM_FOPS instead of making DEFINE_DRM_GEM_FOPS varardic v3: nits Signed-off-by: Rob Clark Acked-by: Thomas Zimmermann Patchwork: https://patchwork.freedesktop.org/patch/488904/ Link: https://lore.kernel.org/r/20220609174213.2265938-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov

Merge drm/drm-next into drm-misc-next

2022-04-05T09:06:58+00:00

Let's start the 5.19 development cycle. Signed-off-by: Maxime Ripard

drm/gem: Delete gem array fencing helpers

2022-04-04T14:46:15+00:00

Integrated into the scheduler now and all users converted over. v2: Rebased over changes from König. Acked-by: Christian König Signed-off-by: Daniel Vetter Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Thomas Zimmermann Cc: David Airlie Cc: Daniel Vetter Cc: Sumit Semwal Cc: "Christian König" Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20220331204651.2699107-3-daniel.vetter@ffwll.ch

dma-buf-map: Rename to iosys-map

2022-02-08T00:35:35+00:00

Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include + #include Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi Acked-by: Christian König Acked-by: Sumit Semwal Acked-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com

drm: Drop drm_gem_object_put_locked()

2021-07-28T01:09:18+00:00

Now that no one is using it, remove it. Signed-off-by: Rob Clark Acked-by: Christian König Reviewed-by: Daniel Vetter Link: https://lore.kernel.org/r/20210728010632.2633470-5-robdclark@gmail.com Signed-off-by: Rob Clark

drm: Don't export the drm_gem_dumb_destroy() function

2021-01-05T05:20:25+00:00

The drm_gem_dumb_destroy() isn't used in drivers, don't export it. Signed-off-by: Laurent Pinchart Reviewed-by: Daniel Vetter