kernel/linux.git/fs/ufs, branch v6.1.168

minmax: add in_range() macro

2025-10-02T11:40:41+00:00

[ Upstream commit f9bff0e31881d03badf191d3b0005839391f5f2b ] Patch series "New page table range API", v6. This patchset changes the API used by the MM to set up page table entries. The four APIs are: set_ptes(mm, addr, ptep, pte, nr) update_mmu_cache_range(vma, addr, ptep, nr) flush_dcache_folio(folio) flush_icache_pages(vma, page, nr) flush_dcache_folio() isn't technically new, but no architecture implemented it, so I've done that for them. The old APIs remain around but are mostly implemented by calling the new interfaces. The new APIs are based around setting up N page table entries at once. The N entries belong to the same PMD, the same folio and the same VMA, so ptep++ is a legitimate operation, and locking is taken care of for you. Some architectures can do a better job of it than just a loop, but I have hesitated to make too deep a change to architectures I don't understand well. One thing I have changed in every architecture is that PG_arch_1 is now a per-folio bit instead of a per-page bit when used for dcache clean/dirty tracking. This was something that would have to happen eventually, and it makes sense to do it now rather than iterate over every page involved in a cache flush and figure out if it needs to happen. The point of all this is better performance, and Fengwei Yin has measured improvement on x86. I suspect you'll see improvement on your architecture too. Try the new will-it-scale test mentioned here: https://lore.kernel.org/linux-mm/20230206140639.538867-5-fengwei.yin@intel.com/ You'll need to run it on an XFS filesystem and have CONFIG_TRANSPARENT_HUGEPAGE set. This patchset is the basis for much of the anonymous large folio work being done by Ryan, so it's received quite a lot of testing over the last few months. This patch (of 38): Determine if a value lies within a range more efficiently (subtraction + comparison vs two comparisons and an AND). It also has useful (under some circumstances) behaviour if the range exceeds the maximum value of the type. Convert all the conflicting definitions of in_range() within the kernel; some can use the generic definition while others need their own definition. Link: https://lkml.kernel.org/r/20230802151406.3735276-1-willy@infradead.org Link: https://lkml.kernel.org/r/20230802151406.3735276-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) Signed-off-by: Andrew Morton Signed-off-by: Eliav Farber Signed-off-by: Greg Kroah-Hartman

ufs: replace ll_rw_block()

2022-09-12T03:26:07+00:00

ll_rw_block() is not safe for the sync read path because it cannot guarantee that submitting read IO if the buffer has been locked. We could get false positive EIO after wait_on_buffer() if the buffer has been locked by others. So stop using ll_rw_block() in ufs. Link: https://lkml.kernel.org/r/20220901133505.2510834-12-yi.zhang@huawei.com Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Reviewed-by: Christoph Hellwig Signed-off-by: Andrew Morton

Merge tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache

2022-08-03T17:35:43+00:00

Pull folio updates from Matthew Wilcox: - Fix an accounting bug that made NR_FILE_DIRTY grow without limit when running xfstests - Convert more of mpage to use folios - Remove add_to_page_cache() and add_to_page_cache_locked() - Convert find_get_pages_range() to filemap_get_folios() - Improvements to the read_cache_page() family of functions - Remove a few unnecessary checks of PageError - Some straightforward filesystem conversions to use folios - Split PageMovable users out from address_space_operations into their own movable_operations - Convert aops->migratepage to aops->migrate_folio - Remove nobh support (Christoph Hellwig) * tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits) fs: remove the NULL get_block case in mpage_writepages fs: don't call ->writepage from __mpage_writepage fs: remove the nobh helpers jfs: stop using the nobh helper ext2: remove nobh support ntfs3: refactor ntfs_writepages mm/folio-compat: Remove migration compatibility functions fs: Remove aops->migratepage() secretmem: Convert to migrate_folio hugetlb: Convert to migrate_folio aio: Convert to migrate_folio f2fs: Convert to filemap_migrate_folio() ubifs: Convert to filemap_migrate_folio() btrfs: Convert btrfs_migratepage to migrate_folio mm/migrate: Add filemap_migrate_folio() mm/migrate: Convert migrate_page() to migrate_folio() nfs: Convert to migrate_folio btrfs: Convert btree_migratepage to migrate_folio mm/migrate: Convert expected_page_refs() to folio_expected_refs() mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio() ...

fs/buffer: Combine two submit_bh() and ll_rw_block() arguments

2022-07-14T18:14:32+00:00

Both submit_bh() and ll_rw_block() accept a request operation type and request flags as their first two arguments. Micro-optimize these two functions by combining these first two arguments into a single argument. This patch does not change the behavior of any of the modified code. Cc: Alexander Viro Cc: Jan Kara Acked-by: Song Liu (for the md changes) Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20220714180729.1065367-48-bvanassche@acm.org Signed-off-by: Jens Axboe

ufs: Remove checks for PageError

2022-06-29T12:51:07+00:00

If read_mapping_page() encounters an error, it returns an errno, not a page with PageError set, or a page that is not Uptodate, so this is dead code. Signed-off-by: Matthew Wilcox (Oracle)

fs: Convert block_read_full_page() to block_read_full_folio()

2022-05-09T20:21:44+00:00

This function is NOT converted to handle large folios, so include an assert that the filesystem isn't passing one in. Otherwise, use the folio functions instead of the page functions, where they exist. Convert all filesystems which use block_read_full_page(). Signed-off-by: Matthew Wilcox (Oracle)

fs: Remove flags parameter from aops->write_begin

2022-05-08T18:28:19+00:00

There are no more aop flags left, so remove the parameter. Signed-off-by: Matthew Wilcox (Oracle) Reviewed-by: Christoph Hellwig

fs: Remove aop flags parameter from block_write_begin()

2022-05-08T18:28:19+00:00

There are no more aop flags left, so remove the parameter. Signed-off-by: Matthew Wilcox (Oracle) Reviewed-by: Christoph Hellwig

Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache

2022-03-23T01:26:56+00:00

Pull filesystem folio updates from Matthew Wilcox: "Primarily this series converts some of the address_space operations to take a folio instead of a page. Notably: - a_ops->is_partially_uptodate() takes a folio instead of a page and changes the type of the 'from' and 'count' arguments to make it obvious they're bytes. - a_ops->invalidatepage() becomes ->invalidate_folio() and has a similar type change. - a_ops->launder_page() becomes ->launder_folio() - a_ops->set_page_dirty() becomes ->dirty_folio() and adds the address_space as an argument. There are a couple of other misc changes up front that weren't worth separating into their own pull request" * tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits) fs: Remove aops ->set_page_dirty fb_defio: Use noop_dirty_folio() fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio fs: Convert __set_page_dirty_buffers to block_dirty_folio nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio() mm: Convert swap_set_page_dirty() to swap_dirty_folio() ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio() btrfs: Convert extent_range_redirty_for_io() to use folios fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio btrfs: Convert from set_page_dirty to dirty_folio fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio() fs: Add aops->dirty_folio fs: Remove aops->launder_page orangefs: Convert launder_page to launder_folio nfs: Convert from launder_page to launder_folio fuse: Convert from launder_page to launder_folio ...

fs: allocate inode by using alloc_inode_sb()

2022-03-22T22:57:03+00:00

The inode allocation is supposed to use alloc_inode_sb(), so convert kmem_cache_alloc() of all filesystems to alloc_inode_sb(). Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com Signed-off-by: Muchun Song Acked-by: Theodore Ts'o [ext4] Acked-by: Roman Gushchin Cc: Alex Shi Cc: Anna Schumaker Cc: Chao Yu Cc: Dave Chinner Cc: Fam Zheng Cc: Jaegeuk Kim Cc: Johannes Weiner Cc: Kari Argillander Cc: Matthew Wilcox (Oracle) Cc: Michal Hocko Cc: Qi Zheng Cc: Shakeel Butt Cc: Trond Myklebust Cc: Vladimir Davydov Cc: Vlastimil Babka Cc: Wei Yang Cc: Xiongchun Duan Cc: Yang Shi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds