kernel/linux.git/fs/proc/page.c, branch linux-6.0.y

mm: don't include in

2022-03-03T17:47:33+00:00

Move the check for the actual pgmap types that need the free at refcount one behavior into the out of line helper, and thus avoid the need to pull memremap.h into mm.h. Link: https://lkml.kernel.org/r/20220210072828.2930359-7-hch@lst.de Signed-off-by: Christoph Hellwig Reviewed-by: Logan Gunthorpe Reviewed-by: Jason Gunthorpe Reviewed-by: Dan Williams Acked-by: Felix Kuehling Tested-by: "Sierra Guiza, Alejandro (Alex)" Cc: Alex Deucher Cc: Alistair Popple Cc: Ben Skeggs Cc: Chaitanya Kulkarni Cc: Karol Herbst Cc: Lyude Paul Cc: Miaohe Lin Cc: Muchun Song Cc: "Pan, Xinhui" Cc: Ralph Campbell Signed-off-by: Andrew Morton Signed-off-by: Matthew Wilcox (Oracle)

mm: Add PG_arch_2 page flag

2020-09-04T11:46:06+00:00

For arm64 MTE support it is necessary to be able to mark pages that contain user space visible tags that will need to be saved/restored e.g. when swapped out. To support this add a new arch specific flag (PG_arch_2). This flag is only available on 64-bit architectures due to the limited number of spare page flags on the 32-bit ones. Signed-off-by: Steven Price [catalin.marinas@arm.com: use CONFIG_64BIT for guarding this new flag] Signed-off-by: Catalin Marinas Cc: Andrew Morton

proc: convert everything to "struct proc_ops"

2020-02-04T03:05:26+00:00

The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

fs/proc/page.c: allow inspection of last section and fix end detection

2020-02-04T03:05:23+00:00

If max_pfn does not fall onto a section boundary, it is possible to inspect PFNs up to max_pfn, and PFNs above max_pfn, however, max_pfn itself can't be inspected. We can have a valid (and online) memmap at and above max_pfn if max_pfn is not aligned to a section boundary. The whole early section has a memmap and is marked online. Being able to inspect the state of these PFNs is valuable for debugging, especially because max_pfn can change on memory hotplug and expose these memmaps. Also, querying page flags via "./page-types -r -a 0x144001," (tools/vm/page-types.c) inside a x86-64 guest with 4160MB under QEMU results in an (almost) endless loop in user space, because the end is not detected properly when starting after max_pfn. Instead, let's allow to inspect all pages in the highest section and return 0 directly if we try to access pages above that section. While at it, check the count before adjusting it, to avoid masking user errors. Link: http://lkml.kernel.org/r/20191211163201.17179-3-david@redhat.com Signed-off-by: David Hildenbrand Cc: Alexey Dobriyan Cc: Oscar Salvador Cc: Michal Hocko Cc: Stephen Rothwell Cc: Bob Picco Cc: Daniel Jordan Cc: Dan Williams Cc: Michal Hocko Cc: Naoya Horiguchi Cc: Pavel Tatashin Cc: Steven Sistare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

fs/proc/page.c: don't access uninitialized memmaps in fs/proc/page.c

2019-10-19T10:32:31+00:00

There are three places where we access uninitialized memmaps, namely: - /proc/kpagecount - /proc/kpageflags - /proc/kpagecgroup We have initialized memmaps either when the section is online or when the page was initialized to the ZONE_DEVICE. Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING. For example, not onlining a DIMM during boot and calling /proc/kpagecount with CONFIG_PAGE_POISONING: :/# cat /proc/kpagecount > tmp.test BUG: unable to handle page fault for address: fffffffffffffffe #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 114616067 P4D 114616067 PUD 114618067 PMD 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 469 Comm: cat Not tainted 5.4.0-rc1-next-20191004+ #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 RIP: 0010:kpagecount_read+0xce/0x1e0 Code: e8 09 83 e0 3f 48 0f a3 02 73 2d 4c 89 e7 48 c1 e7 06 48 03 3d ab 51 01 01 74 1d 48 8b 57 08 480 RSP: 0018:ffffa14e409b7e78 EFLAGS: 00010202 RAX: fffffffffffffffe RBX: 0000000000020000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 00007f76b5595000 RDI: fffff35645000000 RBP: 00007f76b5595000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 R13: 0000000000020000 R14: 00007f76b5595000 R15: ffffa14e409b7f08 FS: 00007f76b577d580(0000) GS:ffff8f41bd400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffffe CR3: 0000000078960000 CR4: 00000000000006f0 Call Trace: proc_reg_read+0x3c/0x60 vfs_read+0xc5/0x180 ksys_read+0x68/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe For now, let's drop support for ZONE_DEVICE from the three pseudo files in order to fix this. To distinguish offline memory (with garbage memmap) from ZONE_DEVICE memory with properly initialized memmaps, we would have to check get_dev_pagemap() and pfn_zone_device_reserved() right now. The usage of both (especially, special casing devmem) is frowned upon and needs to be reworked. The fundamental issue we have is: if (pfn_to_online_page(pfn)) { /* memmap initialized */ } else if (pfn_valid(pfn)) { /* * ??? * a) offline memory. memmap garbage. * b) devmem: memmap initialized to ZONE_DEVICE. * c) devmem: reserved for driver. memmap garbage. * (d) devmem: memmap currently initializing - garbage) */ } We'll leave the pfn_zone_device_reserved() check in stable_page_flags() in place as that function is also used from memory failure. We now no longer dump information about pages that are not in use anymore - offline. Link: http://lkml.kernel.org/r/20191009142435.3975-2-david@redhat.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319] Signed-off-by: David Hildenbrand Reported-by: Qian Cai Acked-by: Michal Hocko Cc: Dan Williams Cc: Alexey Dobriyan Cc: Stephen Rothwell Cc: Toshiki Fukasawa Cc: Pankaj gupta Cc: Mike Rapoport Cc: Anthony Yznaga Cc: "Aneesh Kumar K.V" Cc: [4.13+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: convert PG_balloon to PG_offline

2019-03-06T05:07:14+00:00

PG_balloon was introduced to implement page migration/compaction for pages inflated in virtio-balloon. Nowadays, it is only a marker that a page is part of virtio-balloon and therefore logically offline. We also want to make use of this flag in other balloon drivers - for inflated pages or when onlining a section but keeping some pages offline (e.g. used right now by XEN and Hyper-V via set_online_page_callback()). We are going to expose this flag to dump tools like makedumpfile. But instead of exposing PG_balloon, let's generalize the concept of marking pages as logically offline, so it can be reused for other purposes later on. Rename PG_balloon to PG_offline. This is an indicator that the page is logically offline, the content stale and that it should not be touched (e.g. a hypervisor would have to allocate backing storage in order for the guest to dump an unused page). We can then e.g. exclude such pages from dumps. We replace and reuse KPF_BALLOON (23), as this shouldn't really harm (and for now the semantics stay the same). In following patches, we will make use of this bit also in other balloon drivers. While at it, document PGTABLE. [akpm@linux-foundation.org: fix comment text, per David] Link: http://lkml.kernel.org/r/20181119101616.8901-3-david@redhat.com Signed-off-by: David Hildenbrand Acked-by: Konstantin Khlebnikov Acked-by: Michael S. Tsirkin Acked-by: Pankaj gupta Cc: Jonathan Corbet Cc: Alexey Dobriyan Cc: Mike Rapoport Cc: Christian Hansen Cc: Vlastimil Babka Cc: "Kirill A. Shutemov" Cc: Stephen Rothwell Cc: Matthew Wilcox Cc: Michal Hocko Cc: Pavel Tatashin Cc: Alexander Duyck Cc: Naoya Horiguchi Cc: Miles Chen Cc: David Rientjes Cc: Kazuhito Hagio Cc: Arnd Bergmann Cc: Baoquan He Cc: Borislav Petkov Cc: Boris Ostrovsky Cc: Dave Young Cc: Greg Kroah-Hartman Cc: Haiyang Zhang Cc: Juergen Gross Cc: Julien Freche Cc: Kairui Song Cc: "K. Y. Srinivasan" Cc: Len Brown Cc: Lianbo Jiang Cc: Michal Hocko Cc: Nadav Amit Cc: Omar Sandoval Cc: Pavel Machek Cc: Rafael J. Wysocki Cc: "Rafael J. Wysocki" Cc: Stefano Stabellini Cc: Stephen Hemminger Cc: Vitaly Kuznetsov Cc: Xavier Deguillard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

/proc/kpagecount: return 0 for special pages that are never mapped

2018-12-28T20:11:50+00:00

Certain pages that are never mapped to userspace have a type indicated in the page_type field of their struct pages (e.g. PG_buddy). page_type overlaps with _mapcount so set the count to 0 and avoid calling page_mapcount() for these pages. [anthony.yznaga@oracle.com: incorporate feedback from Matthew Wilcox] Link: http://lkml.kernel.org/r/1544481313-27318-1-git-send-email-anthony.yznaga@oracle.com Link: http://lkml.kernel.org/r/1543963526-27917-1-git-send-email-anthony.yznaga@oracle.com Signed-off-by: Anthony Yznaga Reviewed-by: Andrew Morton Acked-by: Matthew Wilcox Reviewed-by: Naoya Horiguchi Cc: Vlastimil Babka Cc: David Rientjes Cc: Alexey Dobriyan Cc: Kirill A. Shutemov Cc: Mike Rapoport Cc: Michal Hocko Cc: Alexander Duyck Cc: Johannes Weiner Cc: Miles Chen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: remove include/linux/bootmem.h

2018-10-31T15:54:16+00:00

Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include @@ @@ - #include + #include [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport Signed-off-by: Stephen Rothwell Acked-by: Michal Hocko Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Kroah-Hartman Cc: Guan Xuetao Cc: Ingo Molnar Cc: "James E.J. Bottomley" Cc: Jonas Bonn Cc: Jonathan Corbet Cc: Ley Foon Tan Cc: Mark Salter Cc: Martin Schwidefsky Cc: Matt Turner Cc: Michael Ellerman Cc: Michal Simek Cc: Palmer Dabbelt Cc: Paul Burton Cc: Richard Kuo Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Serge Semin Cc: Thomas Gleixner Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: mark pages in use for page tables

2018-06-08T00:34:37+00:00

Define a new PageTable bit in the page_type and use it to mark pages in use as page tables. This can be helpful when debugging crashdumps or analysing memory fragmentation. Add a KPF flag to report these pages to userspace and update page-types.c to interpret that flag. Note that only pages currently accounted as NR_PAGETABLES are tracked as PageTable; this does not include pgd/p4d/pud/pmd pages. Those will be the subject of a later patch. Link: http://lkml.kernel.org/r/20180518194519.3820-4-willy@infradead.org Signed-off-by: Matthew Wilcox Acked-by: Kirill A. Shutemov Acked-by: Vlastimil Babka Cc: Christoph Lameter Cc: Dave Hansen Cc: Jérôme Glisse Cc: Lai Jiangshan Cc: Martin Schwidefsky Cc: Pekka Enberg Cc: Randy Dunlap Cc: Andrey Ryabinin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman