kernel/linux.git/fs/nilfs2/sufile.c, branch v6.2

nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty

2022-11-23T02:50:45+00:00

When extending segments, nilfs_sufile_alloc() is called to get an unassigned segment, then mark it as dirty to avoid accidentally allocating the same segment in the future. But for some special cases such as a corrupted image it can be unreliable. If such corruption of the dirty state of the segment occurs, nilfs2 may reallocate a segment that is in use and pick the same segment for writing twice at the same time. This will cause the problem reported by syzkaller: https://syzkaller.appspot.com/bug?id=c7c4748e11ffcc367cef04f76e02e931833cbd24 This case started with segbuf1.segnum = 3, nextnum = 4 when constructed. It supposed segment 4 has already been allocated and marked as dirty. However the dirty state was corrupted and segment 4 usage was not dirty. For the first time nilfs_segctor_extend_segments() segment 4 was allocated again, which made segbuf2 and next segbuf3 had same segment 4. sb_getblk() will get same bh for segbuf2 and segbuf3, and this bh is added to both buffer lists of two segbuf. It makes the lists broken which causes NULL pointer dereference. Fix the problem by setting usage as dirty every time in nilfs_sufile_mark_dirty(), which is called during constructing current segment to be written out and before allocating next segment. [chenzhongjin@huawei.com: add lock protection per Ryusuke] Link: https://lkml.kernel.org/r/20221121091141.214703-1-chenzhongjin@huawei.com Link: https://lkml.kernel.org/r/20221118063304.140187-1-chenzhongjin@huawei.com Fixes: 9ff05123e3bf ("nilfs2: segment constructor") Signed-off-by: Chen Zhongjin Reported-by: Reported-by: Liu Shixin Acked-by: Ryusuke Konishi Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton

block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD

2022-04-18T01:49:59+00:00

Secure erase is a very different operation from discard in that it is a data integrity operation vs hint. Fully split the limits and helper infrastructure to make the separation more clear. Signed-off-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Acked-by: Christoph Böhmwalder [drbd] Acked-by: Ryusuke Konishi [nifs2] Acked-by: Jaegeuk Kim [f2fs] Acked-by: Coly Li [bcache] Acked-by: David Sterba [btrfs] Acked-by: Chao Yu Reviewed-by: Chaitanya Kulkarni Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de Signed-off-by: Jens Axboe

nilfs2: remove filenames from file comments

2021-11-09T18:02:52+00:00

Remove filenames that are not particularly useful in file comments, and suppress checkpatch warnings WARNING: It's generally not useful to have the filename in the file Link: https://lkml.kernel.org/r/1635151862-11547-3-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Cc: Qing Wang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

nilfs2: fix some kernel-doc warnings for nilfs2

2020-10-16T18:11:22+00:00

Fixes the following W=1 kernel build warning(s): fs/nilfs2/bmap.c:378: warning: Excess function parameter 'bhp' description in 'nilfs_bmap_assign' fs/nilfs2/cpfile.c:907: warning: Excess function parameter 'status' description in 'nilfs_cpfile_change_cpmode' fs/nilfs2/cpfile.c:946: warning: Excess function parameter 'stat' description in 'nilfs_cpfile_get_stat' fs/nilfs2/page.c:76: warning: Excess function parameter 'inode' description in 'nilfs_forget_buffer' fs/nilfs2/sufile.c:563: warning: Excess function parameter 'stat' description in 'nilfs_sufile_get_stat' Signed-off-by: Wang Hai Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Link: https://lkml.kernel.org/r/1601386269-2423-1-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Linus Torvalds

nilfs2: use a more common logging style

2020-08-12T17:58:01+00:00

Add macros for nilfs_(sb, fmt, ...) and convert the uses of 'nilfs_msg(sb, KERN_, ...)' to 'nilfs_(sb, ...)' so nilfs2 uses a logging style more like the typical kernel logging style. Miscellanea: o Realign arguments for these uses Signed-off-by: Joe Perches Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Link: http://lkml.kernel.org/r/1595860111-3920-4-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Linus Torvalds

nilfs2: convert to SPDX license tags

2018-09-04T23:45:02+00:00

Remove the verbose license text from NILFS2 files and replace them with SPDX tags. This does not change the license of any of the code. Link: http://lkml.kernel.org/r/1535624528-5982-1-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi Reviewed-by: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

nilfs2: use time64_t internally

2018-02-07T02:32:45+00:00

The superblock and segment timestamps are used only internally in nilfs2 and can be read out using sysfs. Since we are using the old 'get_seconds()' interface and store the data as timestamps, the behavior differs slightly between 64-bit and 32-bit kernels, the latter will show incorrect timestamps after 2038 in sysfs, and presumably fail completely in 2106 as comparisons go wrong. This changes nilfs2 to use time64_t with ktime_get_real_seconds() to handle timestamps, making the behavior consistent and correct on both 32-bit and 64-bit machines. The on-disk format already uses 64-bit timestamps, so nothing changes there. Link: http://lkml.kernel.org/r/20180122211050.1286441-1-arnd@arndb.de Signed-off-by: Arnd Bergmann Acked-by: Ryusuke Konishi Cc: Jens Axboe Cc: Ingo Molnar Cc: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

nilfs2: align block comments of nilfs_sufile_truncate_range() at *

2017-11-18T00:10:03+00:00

Fix the following checkpatch warning: WARNING: Block comments should align the * on each line #633: FILE: sufile.c:633: +/** + * nilfs_sufile_truncate_range - truncate range of segment array Link: http://lkml.kernel.org/r/1509367935-3086-4-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

nilfs2: move ioctl interface and disk layout to uapi separately

2016-08-02T23:35:21+00:00

The header file "include/linux/nilfs2_fs.h" is composed of parts for ioctl and disk format, and both are intended to be shared with user space programs. This moves them to the uapi directory "include/uapi/linux" splitting the file to "nilfs2_api.h" and "nilfs2_ondisk.h". The following minor changes are accompanied by this migration: - nilfs_direct_node struct in nilfs2/direct.h is converged to nilfs2_ondisk.h because it's an on-disk structure. - inline functions nilfs_rec_len_from_disk() and nilfs_rec_len_to_disk() are moved to nilfs2/dir.c. Link: http://lkml.kernel.org/r/1465825507-3407-4-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

nilfs2: use BIT() macro

2016-08-02T23:35:21+00:00

Replace bit shifts by BIT macro for clarity. Link: http://lkml.kernel.org/r/1465825507-3407-3-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds