kernel/linux.git/fs/nilfs2/ioctl.c, branch v6.2

nilfs2: fix underflow in second superblock position calculations

2023-02-17T23:07:05+00:00

Macro NILFS_SB2_OFFSET_BYTES, which computes the position of the second superblock, underflows when the argument device size is less than 4096 bytes. Therefore, when using this macro, it is necessary to check in advance that the device size is not less than a lower limit, or at least that underflow does not occur. The current nilfs2 implementation lacks this check, causing out-of-bound block access when mounting devices smaller than 4096 bytes: I/O error, dev loop0, sector 36028797018963960 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 NILFS (loop0): unable to read secondary superblock (blocksize = 1024) In addition, when trying to resize the filesystem to a size below 4096 bytes, this underflow occurs in nilfs_resize_fs(), passing a huge number of segments to nilfs_sufile_resize(), corrupting parameters such as the number of segments in superblocks. This causes excessive loop iterations in nilfs_sufile_resize() during a subsequent resize ioctl, causing semaphore ns_segctor_sem to block for a long time and hang the writer thread: INFO: task segctord:5067 blocked for more than 143 seconds. Not tainted 6.2.0-rc8-syzkaller-00015-gf6feea56f66d #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:segctord state:D stack:23456 pid:5067 ppid:2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:5293 [inline] __schedule+0x1409/0x43f0 kernel/sched/core.c:6606 schedule+0xc3/0x190 kernel/sched/core.c:6682 rwsem_down_write_slowpath+0xfcf/0x14a0 kernel/locking/rwsem.c:1190 nilfs_transaction_lock+0x25c/0x4f0 fs/nilfs2/segment.c:357 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2486 [inline] nilfs_segctor_thread+0x52f/0x1140 fs/nilfs2/segment.c:2570 kthread+0x270/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 ... Call Trace: folio_mark_accessed+0x51c/0xf00 mm/swap.c:515 __nilfs_get_page_block fs/nilfs2/page.c:42 [inline] nilfs_grab_buffer+0x3d3/0x540 fs/nilfs2/page.c:61 nilfs_mdt_submit_block+0xd7/0x8f0 fs/nilfs2/mdt.c:121 nilfs_mdt_read_block+0xeb/0x430 fs/nilfs2/mdt.c:176 nilfs_mdt_get_block+0x12d/0xbb0 fs/nilfs2/mdt.c:251 nilfs_sufile_get_segment_usage_block fs/nilfs2/sufile.c:92 [inline] nilfs_sufile_truncate_range fs/nilfs2/sufile.c:679 [inline] nilfs_sufile_resize+0x7a3/0x12b0 fs/nilfs2/sufile.c:777 nilfs_resize_fs+0x20c/0xed0 fs/nilfs2/super.c:422 nilfs_ioctl_resize fs/nilfs2/ioctl.c:1033 [inline] nilfs_ioctl+0x137c/0x2440 fs/nilfs2/ioctl.c:1301 ... This fixes these issues by inserting appropriate minimum device size checks or anti-underflow checks, depending on where the macro is used. Link: https://lkml.kernel.org/r/0000000000004e1dfa05f4a48e6b@google.com Link: https://lkml.kernel.org/r/20230214224043.24141-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Reported-by: Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton

block: add a bdev_discard_granularity helper

2022-04-18T01:49:59+00:00

Abstract away implementation details from file systems by providing a block_device based helper to retrieve the discard granularity. Signed-off-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Acked-by: Christoph Böhmwalder [drbd] Acked-by: Ryusuke Konishi Acked-by: David Sterba [btrfs] Link: https://lore.kernel.org/r/20220415045258.199825-26-hch@lst.de Signed-off-by: Jens Axboe

block: remove QUEUE_FLAG_DISCARD

2022-04-18T01:49:59+00:00

Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Acked-by: Christoph Böhmwalder [drbd] Acked-by: Jan Höppner [s390] Acked-by: Coly Li [bcache] Acked-by: David Sterba [btrfs] Reviewed-by: Chaitanya Kulkarni Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de Signed-off-by: Jens Axboe

Merge branch 'akpm' (patches from Andrew)

2021-11-09T18:11:53+00:00

Merge more updates from Andrew Morton: "87 patches. Subsystems affected by this patch series: mm (pagecache and hugetlb), procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs, init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork, sysvfs, kcov, gdb, resource, selftests, and ipc" * emailed patches from Andrew Morton : (87 commits) ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL ipc: check checkpoint_restore_ns_capable() to modify C/R proc files selftests/kselftest/runner/run_one(): allow running non-executable files virtio-mem: disallow mapping virtio-mem memory via /dev/mem kernel/resource: disallow access to exclusive system RAM regions kernel/resource: clean up and optimize iomem_is_exclusive() scripts/gdb: handle split debug for vmlinux kcov: replace local_irq_save() with a local_lock_t kcov: avoid enable+disable interrupts if !in_task() kcov: allocate per-CPU memory on the relevant node Documentation/kcov: define `ip' in the example Documentation/kcov: include types.h in the example sysv: use BUILD_BUG_ON instead of runtime check kernel/fork.c: unshare(): use swap() to make code cleaner seq_file: fix passing wrong private data seq_file: move seq_escape() to a header signal: remove duplicate include in signal.h crash_dump: remove duplicate include in crash_dump.h crash_dump: fix boolreturn.cocci warning hfs/hfsplus: use WARN_ON for sanity check ...

nilfs2: remove filenames from file comments

2021-11-09T18:02:52+00:00

Remove filenames that are not particularly useful in file comments, and suppress checkpatch warnings WARNING: It's generally not useful to have the filename in the file Link: https://lkml.kernel.org/r/1635151862-11547-3-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Cc: Qing Wang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

nilfs2: use bdev_nr_bytes instead of open coding it

2021-10-18T20:43:23+00:00

Use the proper helper to read the block device size. Signed-off-by: Christoph Hellwig Reviewed-by: Kees Cook Acked-by: Ryusuke Konishi Link: https://lore.kernel.org/r/20211018101130.1838532-20-hch@lst.de Signed-off-by: Jens Axboe

nilfs2: fix typos in comments

2021-05-07T02:24:13+00:00

numer -> number in fs/nilfs2/cpfile.c Decription -> Description in fs/nilfs2/ioctl.c isntance -> instance in fs/nilfs2/the_nilfs.c Link: https://lkml.kernel.org/r/1617942951-14631-1-git-send-email-konishi.ryusuke@gmail.com Link: https://lore.kernel.org/r/20210409022519.176988-1-lujialin4@huawei.com Signed-off-by: Lu Jialin Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

nilfs2: convert to fileattr

2021-04-12T13:04:30+00:00

Use the fileattr API to let the VFS handle locking, permission checking and conversion. Signed-off-by: Miklos Szeredi Cc: Ryusuke Konishi

inode: make init and permission helpers idmapped mount aware

2021-01-24T13:27:16+00:00

The inode_owner_or_capable() helper determines whether the caller is the owner of the inode or is capable with respect to that inode. Allow it to handle idmapped mounts. If the inode is accessed through an idmapped mount it according to the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Similarly, allow the inode_init_owner() helper to handle idmapped mounts. It initializes a new inode on idmapped mounts by mapping the fsuid and fsgid of the caller from the mount's user namespace. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com Cc: Christoph Hellwig Cc: David Howells Cc: Al Viro Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig Reviewed-by: James Morris Signed-off-by: Christian Brauner

nilfs2: use a more common logging style

2020-08-12T17:58:01+00:00

Add macros for nilfs_(sb, fmt, ...) and convert the uses of 'nilfs_msg(sb, KERN_, ...)' to 'nilfs_(sb, ...)' so nilfs2 uses a logging style more like the typical kernel logging style. Miscellanea: o Realign arguments for these uses Signed-off-by: Joe Perches Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Link: http://lkml.kernel.org/r/1595860111-3920-4-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Linus Torvalds