kernel/linux.git/fs/jfs/super.c, branch linux-6.0.y

block: remove QUEUE_FLAG_DISCARD

2022-04-18T01:49:59+00:00

Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Acked-by: Christoph Böhmwalder [drbd] Acked-by: Jan Höppner [s390] Acked-by: Coly Li [bcache] Acked-by: David Sterba [btrfs] Reviewed-by: Chaitanya Kulkarni Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de Signed-off-by: Jens Axboe

fs: allocate inode by using alloc_inode_sb()

2022-03-22T22:57:03+00:00

The inode allocation is supposed to use alloc_inode_sb(), so convert kmem_cache_alloc() of all filesystems to alloc_inode_sb(). Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com Signed-off-by: Muchun Song Acked-by: Theodore Ts'o [ext4] Acked-by: Roman Gushchin Cc: Alex Shi Cc: Anna Schumaker Cc: Chao Yu Cc: Dave Chinner Cc: Fam Zheng Cc: Jaegeuk Kim Cc: Johannes Weiner Cc: Kari Argillander Cc: Matthew Wilcox (Oracle) Cc: Michal Hocko Cc: Qi Zheng Cc: Shakeel Butt Cc: Trond Myklebust Cc: Vladimir Davydov Cc: Vlastimil Babka Cc: Wei Yang Cc: Xiongchun Duan Cc: Yang Shi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

jfs: use sb_bdev_nr_blocks

2021-10-18T20:43:23+00:00

Use the sb_bdev_nr_blocks helper instead of open coding it. Signed-off-by: Christoph Hellwig Reviewed-by: Kees Cook Acked-by: Dave Kleikamp Link: https://lore.kernel.org/r/20211018101130.1838532-28-hch@lst.de Signed-off-by: Jens Axboe

jfs: use bdev_nr_bytes instead of open coding it

2021-10-18T20:43:23+00:00

Use the proper helper to read the block device size. Signed-off-by: Christoph Hellwig Reviewed-by: Kees Cook Acked-by: Dave Kleikamp Link: https://lore.kernel.org/r/20211018101130.1838532-18-hch@lst.de Signed-off-by: Jens Axboe

jfs: Avoid field-overflowing memcpy()

2021-06-23T14:21:52+00:00

In preparation for FORTIFY_SOURCE performing compile-time and run-time field array bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Introduce more unions to cover the full inline data section, so that the entire 256 bytes can be addressed by memcpy() without thinking it is crossing field boundaries. Additionally adjusts dir memcpy() to use existing union names to get the same coverage. diffoscope shows there are no binary differences before/after excepting the name of the initcall, which is line number based: $ diffoscope --exclude-directory-metadata yes before/fs after/fs --- before/fs +++ after/fs │ --- before/fs/jfs ├── +++ after/fs/jfs │ │ --- before/fs/jfs/super.o │ ├── +++ after/fs/jfs/super.o │ │ ├── readelf --wide --symbols {} │ │ │ @@ -2,15 +2,15 @@ │ │ │ Symbol table '.symtab' contains 158 entries: │ │ │ Num: Value Size Type Bind Vis Ndx Name ... │ │ │ - 5: 0000000000000000 0 NOTYPE LOCAL DEFAULT 6 __initcall__kmod_jfs__319_1049_ini t_jfs_fs6 │ │ │ + 5: 0000000000000000 0 NOTYPE LOCAL DEFAULT 6 __initcall__kmod_jfs__319_1050_ini t_jfs_fs6 ... Signed-off-by: Kees Cook Signed-off-by: Dave Kleikamp

fs/inode.c: make inode_init_always() initialize i_ino to 0

2021-01-04T19:10:32+00:00

Currently inode_init_always() doesn't initialize i_ino to 0. This is unexpected because unlike the other inode fields that aren't initialized by inode_init_always(), i_ino isn't guaranteed to end up back at its initial value after the inode is freed. Only one filesystem (XFS) actually sets set i_ino back to 0 when freeing its inodes. So, callers of new_inode() see some random previous i_ino. Normally that's fine, since normally i_ino isn't accessed before being set. There can be edge cases where that isn't necessarily true, though. The one I've run into is that on ext4, when creating an encrypted file, the new file's encryption key has to be set up prior to the jbd2 transaction, and thus prior to i_ino being set. If something goes wrong, fs/crypto/ may log warning or error messages, which normally include i_ino. So it needs to know whether it is valid to include i_ino yet or not. Also, on some files i_ino needs to be hashed for use in the crypto, so fs/crypto/ needs to know whether that can be done yet or not. There are ways this could be worked around, either in fs/crypto/ or in fs/ext4/. But, it seems there's no reason not to just fix inode_init_always() to do the expected thing and initialize i_ino to 0. So, do that, and also remove the initialization in jfs_fill_super() that becomes redundant. Signed-off-by: Eric Biggers Signed-off-by: Al Viro

fs: Fill in max and min timestamps in superblock

2019-08-30T14:27:17+00:00

Fill in the appropriate limits to avoid inconsistencies in the vfs cached inode times when timestamps are outside the permitted range. Even though some filesystems are read-only, fill in the timestamps to reflect the on-disk representation. Signed-off-by: Deepa Dinamani Reviewed-by: Darrick J. Wong Acked-By: Tigran Aivazian Acked-by: Jeff Layton Cc: aivazian.tigran@gmail.com Cc: al@alarsen.net Cc: coda@cs.cmu.edu Cc: darrick.wong@oracle.com Cc: dushistov@mail.ru Cc: dwmw2@infradead.org Cc: hch@infradead.org Cc: jack@suse.com Cc: jaharkes@cs.cmu.edu Cc: luisbg@kernel.org Cc: nico@fluxnic.net Cc: phillip@squashfs.org.uk Cc: richard@nod.at Cc: salah.triki@gmail.com Cc: shaggy@kernel.org Cc: linux-xfs@vger.kernel.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: reiserfs-devel@vger.kernel.org

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

2019-05-30T18:26:35+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'jfs-5.2' of git://github.com/kleikamp/linux-shaggy

2019-05-07T18:37:27+00:00

Pull jfs updates from Dave Kleikamp: "Several minor jfs fixes" * tag 'jfs-5.2' of git://github.com/kleikamp/linux-shaggy: jfs: fix bogus variable self-initialization fs/jfs: Switch to use new generic UUID API jfs: compare old and new mode before setting update_mode flag jfs: remove incorrect comment in jfs_superblock jfs: fix spelling mistake, EACCESS -> EACCES

jfs: switch to ->free_inode()

2019-05-02T02:43:26+00:00

synchronous part can be moved to ->evict_inode(), the rest - ->free_inode() fodder Signed-off-by: Al Viro