kernel/linux.git/fs/fuse/dir.c, branch v5.15.209

fuse: allocate ff->release_args only if release is needed

2025-10-29T13:03:14+00:00

[ Upstream commit e26ee4efbc79610b20e7abe9d96c87f33dacc1ff ] This removed the need to pass isdir argument to fuse_put_file(). Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi Stable-dep-of: 26e5c67deb2e ("fuse: fix livelock in synchronous file put from fuseblk workers") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

fuse: fix dax truncate/punch_hole fault path

2025-04-10T12:32:02+00:00

[ Upstream commit 7851bf649d423edd7286b292739f2eefded3d35c ] Patch series "fs/dax: Fix ZONE_DEVICE page reference counts", v9. Device and FS DAX pages have always maintained their own page reference counts without following the normal rules for page reference counting. In particular pages are considered free when the refcount hits one rather than zero and refcounts are not added when mapping the page. Tracking this requires special PTE bits (PTE_DEVMAP) and a secondary mechanism for allowing GUP to hold references on the page (see get_dev_pagemap). However there doesn't seem to be any reason why FS DAX pages need their own reference counting scheme. By treating the refcounts on these pages the same way as normal pages we can remove a lot of special checks. In particular pXd_trans_huge() becomes the same as pXd_leaf(), although I haven't made that change here. It also frees up a valuable SW define PTE bit on architectures that have devmap PTE bits defined. It also almost certainly allows further clean-up of the devmap managed functions, but I have left that as a future improvment. It also enables support for compound ZONE_DEVICE pages which is one of my primary motivators for doing this work. This patch (of 20): FS DAX requires file systems to call into the DAX layout prior to unlinking inodes to ensure there is no ongoing DMA or other remote access to the direct mapped page. The fuse file system implements fuse_dax_break_layouts() to do this which includes a comment indicating that passing dmap_end == 0 leads to unmapping of the whole file. However this is not true - passing dmap_end == 0 will not unmap anything before dmap_start, and further more dax_layout_busy_page_range() will not scan any of the range to see if there maybe ongoing DMA access to the range. Fix this by passing -1 for dmap_end to fuse_dax_break_layouts() which will invalidate the entire file range to dax_layout_busy_page_range(). Link: https://lkml.kernel.org/r/cover.8068ad144a7eea4a813670301f4d2a86a8e68ec4.1740713401.git-series.apopple@nvidia.com Link: https://lkml.kernel.org/r/f09a34b6c40032022e4ddee6fadb7cc676f08867.1740713401.git-series.apopple@nvidia.com Fixes: 6ae330cad6ef ("virtiofs: serialize truncate/punch_hole and dax fault path") Signed-off-by: Alistair Popple Co-developed-by: Dan Williams Signed-off-by: Dan Williams Reviewed-by: Balbir Singh Tested-by: Alison Schofield Cc: Vivek Goyal Cc: Alexander Gordeev Cc: Asahi Lina Cc: Bjorn Helgaas Cc: Catalin Marinas Cc: Christian Borntraeger Cc: Christoph Hellwig Cc: Chunyan Zhang Cc: "Darrick J. Wong" Cc: Dave Chinner Cc: Dave Hansen Cc: Dave Jiang Cc: David Hildenbrand Cc: Gerald Schaefer Cc: Heiko Carstens Cc: Huacai Chen Cc: Ira Weiny Cc: Jan Kara Cc: Jason Gunthorpe Cc: Jason Gunthorpe Cc: John Hubbard Cc: linmiaohe Cc: Logan Gunthorpe Cc: Matthew Wilcow (Oracle) Cc: Michael "Camp Drill Sergeant" Ellerman Cc: Nicholas Piggin Cc: Peter Xu Cc: Sven Schnelle Cc: Ted Ts'o Cc: Vasily Gorbik Cc: Vishal Verma Cc: WANG Xuerui Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin

fuse: don't truncate cached, mutated symlink

2025-04-10T12:31:51+00:00

[ Upstream commit b4c173dfbb6c78568578ff18f9e8822d7bd0e31b ] Fuse allows the value of a symlink to change and this property is exploited by some filesystems (e.g. CVMFS). It has been observed, that sometimes after changing the symlink contents, the value is truncated to the old size. This is caused by fuse_getattr() racing with fuse_reverse_inval_inode(). fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which results in fuse_change_attributes() exiting before updating the cached attributes This is okay, as the cached attributes remain invalid and the next call to fuse_change_attributes() will likely update the inode with the correct values. The reason this causes problems is that cached symlinks will be returned through page_get_link(), which truncates the symlink to inode->i_size. This is correct for filesystems that don't mutate symlinks, but in this case it causes bad behavior. The solution is to just remove this truncation. This can cause a regression in a filesystem that relies on supplying a symlink larger than the file size, but this is unlikely. If that happens we'd need to make this behavior conditional. Reported-by: Laura Promberger Tested-by: Sam Lewis Signed-off-by: Miklos Szeredi Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com Reviewed-by: Bernd Schubert Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin

fuse: fix root lookup with nonzero generation

2024-04-10T14:18:38+00:00

[ Upstream commit 68ca1b49e430f6534d0774a94147a823e3b8b26e ] The root inode has a fixed nodeid and generation (1, 0). Prior to the commit 15db16837a35 ("fuse: fix illegal access to inode with reused nodeid") generation number on lookup was ignored. After this commit lookup with the wrong generation number resulted in the inode being unhashed. This is correct for non-root inodes, but replacing the root inode is wrong and results in weird behavior. Fix by reverting to the old behavior if ignoring the generation for the root inode, but issuing a warning in dmesg. Reported-by: Antonio SJ Musumeci Closes: https://lore.kernel.org/all/CAOQ4uxhek5ytdN8Yz2tNEOg5ea4NkBb4nk0FGPjPk_9nz-VG3g@mail.gmail.com/ Fixes: 15db16837a35 ("fuse: fix illegal access to inode with reused nodeid") Cc: # v5.14 Signed-off-by: Miklos Szeredi Signed-off-by: Sasha Levin

fuse: revalidate: don't invalidate if interrupted

2023-07-27T06:46:54+00:00

commit a9d1c4c6df0e568207907c04aed9e7beb1294c42 upstream. If the LOOKUP request triggered from fuse_dentry_revalidate() is interrupted, then the dentry will be invalidated, possibly resulting in submounts being unmounted. Reported-by: Xu Rongbo Closes: https://lore.kernel.org/all/CAJfpegswN_CJJ6C3RZiaK6rpFmNyWmXfaEpnQUJ42KCwNF5tWw@mail.gmail.com/ Fixes: 9e6268db496a ("[PATCH] FUSE - read-write operations") Cc: Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman

fuse: fix deadlock between atomic O_TRUNC and page invalidation

2023-04-26T11:51:54+00:00

commit 2fdbb8dd01556e1501132b5ad3826e8f71e24a8b upstream. fuse_finish_open() will be called with FUSE_NOWRITE set in case of atomic O_TRUNC open(), so commit 76224355db75 ("fuse: truncate pagecache on atomic_o_trunc") replaced invalidate_inode_pages2() by truncate_pagecache() in such a case to avoid the A-A deadlock. However, we found another A-B-B-A deadlock related to the case above, which will cause the xfstests generic/464 testcase hung in our virtio-fs test environment. For example, consider two processes concurrently open one same file, one with O_TRUNC and another without O_TRUNC. The deadlock case is described below, if open(O_TRUNC) is already set_nowrite(acquired A), and is trying to lock a page (acquiring B), open() could have held the page lock (acquired B), and waiting on the page writeback (acquiring A). This would lead to deadlocks. open(O_TRUNC) ---------------------------------------------------------------- fuse_open_common inode_lock [C acquire] fuse_set_nowrite [A acquire] fuse_finish_open truncate_pagecache lock_page [B acquire] truncate_inode_page unlock_page [B release] fuse_release_nowrite [A release] inode_unlock [C release] ---------------------------------------------------------------- open() ---------------------------------------------------------------- fuse_open_common fuse_finish_open invalidate_inode_pages2 lock_page [B acquire] fuse_launder_page fuse_wait_on_page_writeback [A acquire & release] unlock_page [B release] ---------------------------------------------------------------- Besides this case, all calls of invalidate_inode_pages2() and invalidate_inode_pages2_range() in fuse code also can deadlock with open(O_TRUNC). Fix by moving the truncate_pagecache() call outside the nowrite protected region. The nowrite protection is only for delayed writeback (writeback_cache) case, where inode lock does not protect against truncation racing with writes on the server. Write syscalls racing with page cache truncation still get the inode lock protection. This patch also changes the order of filemap_invalidate_lock() vs. fuse_set_nowrite() in fuse_open_common(). This new order matches the order found in fuse_file_fallocate() and fuse_do_setattr(). Reported-by: Jiachen Zhang Tested-by: Jiachen Zhang Fixes: e4648309b85a ("fuse: truncate pending writes on O_TRUNC") Cc: Signed-off-by: Miklos Szeredi Signed-off-by: Yang Bo Signed-off-by: Greg Kroah-Hartman

fuse: always revalidate rename target dentry

2023-04-26T11:51:54+00:00

commit ccc031e26afe60d2a5a3d93dabd9c978210825fb upstream. The previous commit df8629af2934 ("fuse: always revalidate if exclusive create") ensures that the dentries are revalidated on O_EXCL creates. This commit complements it by also performing revalidation for rename target dentries. Otherwise, a rename target file that only exists in kernel dentry cache but not in the filesystem will result in EEXIST if RENAME_NOREPLACE flag is used. Signed-off-by: Jiachen Zhang Signed-off-by: Zhang Tianci Signed-off-by: Miklos Szeredi Signed-off-by: Yang Bo Signed-off-by: Greg Kroah-Hartman

fuse: annotate lock in fuse_reverse_inval_entry()

2021-12-22T08:32:50+00:00

commit bda9a71980e083699a0360963c0135657b73f47a upstream. Add missing inode lock annotatation; found by syzbot. Reported-and-tested-by: syzbot+9f747458f5990eaa8d43@syzkaller.appspotmail.com Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman

fuse: make sure reclaim doesn't write the inode

2021-12-17T09:30:16+00:00

commit 5c791fe1e2a4f401f819065ea4fc0450849f1818 upstream. In writeback cache mode mtime/ctime updates are cached, and flushed to the server using the ->write_inode() callback. Closing the file will result in a dirty inode being immediately written, but in other cases the inode can remain dirty after all references are dropped. This result in the inode being written back from reclaim, which can deadlock on a regular allocation while the request is being served. The usual mechanisms (GFP_NOFS/PF_MEMALLOC*) don't work for FUSE, because serving a request involves unrelated userspace process(es). Instead do the same as for dirty pages: make sure the inode is written before the last reference is gone. - fallocate(2)/copy_file_range(2): these call file_update_time() or file_modified(), so flush the inode before returning from the call - unlink(2), link(2) and rename(2): these call fuse_update_ctime(), so flush the ctime directly from this helper Reported-by: chenguanyou Signed-off-by: Miklos Szeredi Cc: Ed Tsai Signed-off-by: Greg Kroah-Hartman

fuse: Convert to using invalidate_lock

2021-07-13T12:29:01+00:00

Use invalidate_lock instead of fuse's private i_mmap_sem. The intended purpose is exactly the same. By this conversion we fix a long standing race between hole punching and read(2) / readahead(2) paths that can lead to stale page cache contents. CC: Miklos Szeredi Reviewed-by: Miklos Szeredi Signed-off-by: Jan Kara