kernel/linux.git/fs/f2fs/node.h, branch v6.1.168

f2fs: convert to use bitmap API

2024-01-10T16:10:30+00:00

[ Upstream commit 447286ebadaafa551550704ff0b42eb08b1d1cb2 ] Let's use BIT() and GENMASK() instead of open it. Signed-off-by: Yangtao Li Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Stable-dep-of: f5f3bd903a5d ("f2fs: set the default compress_level on ioctl") Signed-off-by: Sasha Levin

f2fs: specify extent cache for read explicitly

2023-05-17T09:53:52+00:00

[ Upstream commit 12607c1ba7637e750402f555b6695c50fce77a2b ] Let's descrbie it's read extent cache. Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Stable-dep-of: 043d2d00b443 ("f2fs: factor out victim_entry usage from general rb_tree use") Signed-off-by: Sasha Levin

f2fs: change the current atomic write way

2022-05-12T17:14:03+00:00

Current atomic write has three major issues like below. - keeps the updates in non-reclaimable memory space and they are even hard to be migrated, which is not good for contiguous memory allocation. - disk spaces used for atomic files cannot be garbage collected, so this makes it difficult for the filesystem to be defragmented. - If atomic write operations hit the threshold of either memory usage or garbage collection failure count, All the atomic write operations will fail immediately. To resolve the issues, I will keep a COW inode internally for all the updates to be flushed from memory, when we need to flush them out in a situation like high memory pressure. These COW inodes will be tagged as orphan inodes to be reclaimed in case of sudden power-cut or system failure during atomic writes. Signed-off-by: Daeho Jeong Signed-off-by: Jaegeuk Kim

f2fs: add a way to limit roll forward recovery time

2022-02-12T13:58:18+00:00

This adds a sysfs entry to call checkpoint during fsync() in order to avoid long elapsed time to run roll-forward recovery when booting the device. Default value doesn't enforce the limitation which is same as before. Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim

f2fs: introduce excess_dirty_threshold()

2021-09-20T23:12:51+00:00

This patch enables f2fs_balance_fs_bg() to check all metadatas' dirty threshold rather than just checking node block's, so that checkpoint() from background can be triggered more frequently to avoid heaping up too much dirty metadatas. Threshold value by default: race with foreground ops single type global No 16MB 24MB Yes 24MB 36MB In addtion, let f2fs_balance_fs_bg() be aware of roll-forward sapce as well as fsync(). Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim

f2fs: swap: support migrating swapfile in aligned write mode

2021-06-23T08:09:35+00:00

This patch supports to migrate swapfile in aligned write mode during swapon in order to keep swapfile being aligned to section as much as possible, then pinned swapfile will locates fully filled section which may not affected by GC. However, for the case that swapfile's size is not aligned to section size, it will still leave last extent in file's tail as unaligned due to its size is smaller than section size, like case #2. case #1 xfs_io -f /mnt/f2fs/file -c "pwrite 0 4M" -c "fsync" Before swapon: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..3047]: 1123352..1126399 3048 0x1000 1: [3048..7143]: 237568..241663 4096 0x1000 2: [7144..8191]: 245760..246807 1048 0x1001 After swapon: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..8191]: 249856..258047 8192 0x1001 Kmsg: F2FS-fs (zram0): Swapfile (2) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * n) case #2 xfs_io -f /mnt/f2fs/file -c "pwrite 0 3M" -c "fsync" Before swapon: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..3047]: 246808..249855 3048 0x1000 1: [3048..6143]: 237568..240663 3096 0x1001 After swapon: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..4095]: 258048..262143 4096 0x1000 1: [4096..6143]: 238616..240663 2048 0x1001 Kmsg: F2FS-fs (zram0): Swapfile: last extent is not aligned to section F2FS-fs (zram0): Swapfile (2) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * n) Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim

f2fs: compress: add compress_inode to cache compressed blocks

2021-06-23T08:09:35+00:00

Support to use address space of inner inode to cache compressed block, in order to improve cache hit ratio of random read. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim

f2fs: restructure f2fs page.private layout

2021-05-14T18:22:08+00:00

Restruct f2fs page private layout for below reasons: There are some cases that f2fs wants to set a flag in a page to indicate a specified status of page: a) page is in transaction list for atomic write b) page contains dummy data for aligned write c) page is migrating for GC d) page contains inline data for inline inode flush e) page belongs to merkle tree, and is verified for fsverity f) page is dirty and has filesystem/inode reference count for writeback g) page is temporary and has decompress io context reference for compression There are existed places in page structure we can use to store f2fs private status/data: - page.flags: PG_checked, PG_private - page.private However it was a mess when we using them, which may cause potential confliction: page.private PG_private PG_checked page._refcount (+1 at most) a) -1 set +1 b) -2 set c), d), e) set f) 0 set +1 g) pointer set The other problem is page.flags has no free slot, if we can avoid set zero to page.private and set PG_private flag, then we use non-zero value to indicate PG_private status, so that we may have chance to reclaim PG_private slot for other usage. [1] The other concern is f2fs has bad scalability in aspect of indicating more page status. So in this patch, let's restructure f2fs' page.private as below to solve above issues: Layout A: lowest bit should be 1 | bit0 = 1 | bit1 | bit2 | ... | bit MAX | private data .... | bit 0 PAGE_PRIVATE_NOT_POINTER bit 1 PAGE_PRIVATE_ATOMIC_WRITE bit 2 PAGE_PRIVATE_DUMMY_WRITE bit 3 PAGE_PRIVATE_ONGOING_MIGRATION bit 4 PAGE_PRIVATE_INLINE_INODE bit 5 PAGE_PRIVATE_REF_RESOURCE bit 6- f2fs private data Layout B: lowest bit should be 0 page.private is a wrapped pointer. After the change: page.private PG_private PG_checked page._refcount (+1 at most) a) 11 set +1 b) 101 set +1 c) 1001 set +1 d) 10001 set +1 e) set f) 100001 set +1 g) pointer set +1 [1] https://lore.kernel.org/linux-f2fs-devel/20210422154705.GO3596236@casper.infradead.org/T/#u Cc: Matthew Wilcox Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim

f2fs: allow to change discard policy based on cached discard cmds

2021-03-26T17:27:44+00:00

With the default DPOLICY_BG discard thread is ioaware, which prevents the discard thread from issuing the discard commands. On low RAM setups, it is observed that these discard commands in the cache are consuming high memory. This patch aims to relax the memory pressure on the system due to f2fs pending discard cmds by changing the policy to DPOLICY_FORCE based on the nm_i->ram_thresh configured. Signed-off-by: Sahitya Tummala Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim

f2fs: avoid race condition for shrinker count

2020-12-03T08:59:26+00:00

Light reported sometimes shinker gets nat_cnt < dirty_nat_cnt resulting in wrong do_shinker work. Let's avoid to return insane overflowed value by adding single tracking value. Reported-by: Light Hsieh Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim