kernel/linux.git/fs/ext4, branch v6.6.148

ext4: fix kernel BUG in ext4_write_inline_data_end

2026-07-24T14:03:10+00:00

[ Upstream commit ad09aa45965d3fafaf9963bc78109b73c0f9ac8d ] When the data=journal mount option is used, the ext4_journalled_write_end() function incorrectly calls ext4_write_inline_data_end() without checking if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode. If a previous attempt to convert the inline data to an extent failed (e.g. due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next call to ext4_write_begin() will not prepare the inline data xattr for writing, but ext4_journalled_write_end() will incorrectly attempt to write to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in ext4_write_inline_data() since i_inline_size was not expanded. Fix this by ensuring that ext4_journalled_write_end() only calls ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). Reported-by: syzbot+0c89d865531d053abb2d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0c89d865531d053abb2d Fixes: 3fdcfb668fd7 ("ext4: add journalled write support for inline data") Signed-off-by: Aditya Prakash Srivastava Reviewed-by: Jan Kara Link: https://patch.msgid.link/20260608065227.3018-1-aditya.ansh182@gmail.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin

ext4: fix LOGFLUSH shutdown ordering to allow ordered-mode data writeback

2026-07-24T14:03:05+00:00

[ Upstream commit d99748ef1695ce17eaf51c64b7a06952fa7cddab ] In EXT4_GOING_FLAGS_LOGFLUSH mode, the EXT4_FLAGS_SHUTDOWN flag was set before calling ext4_force_commit(). This caused ordered-mode data writeback (triggered by journal commit) to fail with -EIO, since ext4_do_writepages() checks for the shutdown flag. The journal would then be aborted prematurely before the commit could succeed. Fix this by calling ext4_force_commit() first, then setting the shutdown flag, so that pending data can be written back correctly. Note that moving ext4_force_commit() before setting the shutdown flag creates a small window in which new writes may occur and generate new journal transactions. When the journal is subsequently aborted, the new transactions will not be able to write to disk. This is intentional because LOGFLUSH's semantics are to flush pre-existing journal entries before shutdown, not to guarantee atomicity for writes that race with the ioctl. Fixes: 783d94854499 ("ext4: add EXT4_IOC_GOINGDOWN ioctl") Signed-off-by: Zhang Yi Reviewed-by: Baokun Li Reviewed-by: Jan Kara Link: https://patch.msgid.link/20260424104201.1930823-1-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin

ext4: get rid of ppath in get_ext_path()

2026-07-24T14:02:35+00:00

[ Upstream commit 6b854d552711aa33f59eda334e6d94a00d8825bb ] The use of path and ppath is now very confusing, so to make the code more readable, pass path between functions uniformly, and get rid of ppath. After getting rid of ppath in get_ext_path(), its caller may pass an error pointer to ext4_free_ext_path(), so it needs to teach ext4_free_ext_path() and ext4_ext_drop_refs() to skip the error pointer. No functional changes. Signed-off-by: Baokun Li Reviewed-by: Jan Kara Reviewed-by: Ojaswin Mujoo Tested-by: Ojaswin Mujoo Link: https://patch.msgid.link/20240822023545.1994557-13-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin

ext4: validate p_idx bounds in ext4_ext_correct_indexes

2026-05-17T15:13:35+00:00

[ Upstream commit 2acb5c12ebd860f30e4faf67e6cc8c44ddfe5fe8 ] ext4_ext_correct_indexes() walks up the extent tree correcting index entries when the first extent in a leaf is modified. Before accessing path[k].p_idx->ei_block, there is no validation that p_idx falls within the valid range of index entries for that level. If the on-disk extent header contains a corrupted or crafted eh_entries value, p_idx can point past the end of the allocated buffer, causing a slab-out-of-bounds read. Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at both access sites: before the while loop and inside it. Return -EFSCORRUPTED if the index pointer is out of range, consistent with how other bounds violations are handled in the ext4 extent tree code. Reported-by: syzbot+04c4e65cab786a2e5b7e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=04c4e65cab786a2e5b7e Signed-off-by: Tejas Bharambe Link: https://patch.msgid.link/JH0PR06MB66326016F9B6AD24097D232B897CA@JH0PR06MB6632.apcprd06.prod.outlook.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org [ Minor conflict resolved. ] Signed-off-by: Jianqiang kang Signed-off-by: Sasha Levin

ext4: fix missing brelse() in ext4_xattr_inode_dec_ref_all()

2026-05-17T15:13:32+00:00

commit 77d059519382bd66283e6a4e83ee186e87e7708f upstream. The commit c8e008b60492 ("ext4: ignore xattrs past end") introduced a refcount leak in when block_csum is false. ext4_xattr_inode_dec_ref_all() calls ext4_get_inode_loc() to get iloc.bh, but never releases it with brelse(). Fixes: c8e008b60492 ("ext4: ignore xattrs past end") Signed-off-by: Sohei Koyama Reviewed-by: Andreas Dilger Reviewed-by: Ritesh Harjani (IBM) Cc: stable@vger.kernel.org Reviewed-by: Zhang Yi Reviewed-by: Baokun Li Link: https://patch.msgid.link/20260406074830.8480-1-skoyama@ddn.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access

2026-05-17T15:13:32+00:00

commit eceafc31ea7b42c984ece10d79d505c0bb6615d5 upstream. The bounds check for the next xattr entry in check_xattrs() uses (void *)next >= end, which allows next to point within sizeof(u32) bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4 bytes via *(__u32 *)(entry), which can overrun the valid xattr region. For example, if next lands at end - 1, the check passes since next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1, accessing 3 bytes beyond the valid region. Fix this by changing the check to (void *)next + sizeof(u32) > end, ensuring there is always enough space for the IS_LAST_ENTRY() read on the subsequent iteration. Fixes: 3478c83cf26b ("ext4: improve xattr consistency checking and error reporting") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20260224231429.31361-1-kartikey406@gmail.com/T/ [v1] Signed-off-by: Deepanshu Kartikey Link: https://patch.msgid.link/20260328150038.349497-1-kartikey406@gmail.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

ext4: handle wraparound when searching for blocks for indirect mapped blocks

2026-04-11T12:19:36+00:00

[ Upstream commit bb81702370fad22c06ca12b6e1648754dbc37e0f ] Commit 4865c768b563 ("ext4: always allocate blocks only from groups inode can use") restricts what blocks will be allocated for indirect block based files to block numbers that fit within 32-bit block numbers. However, when using a review bot running on the latest Gemini LLM to check this commit when backporting into an LTS based kernel, it raised this concern: If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal group was populated via stream allocation from s_mb_last_groups), then start will be >= ngroups. Does this allow allocating blocks beyond the 32-bit limit for indirect block mapped files? The commit message mentions that ext4_mb_scan_groups_linear() takes care to not select unsupported groups. However, its loop uses group = *start, and the very first iteration will call ext4_mb_scan_group() with this unsupported group because next_linear_group() is only called at the end of the iteration. After reviewing the code paths involved and considering the LLM review, I determined that this can happen when there is a file system where some files/directories are extent-mapped and others are indirect-block mapped. To address this, add a safety clamp in ext4_mb_scan_groups(). Fixes: 4865c768b563 ("ext4: always allocate blocks only from groups inode can use") Cc: Jan Kara Reviewed-by: Baokun Li Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://patch.msgid.link/20260326045834.1175822-1-tytso@mit.edu Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ext4: publish jinode after initialization

2026-04-11T12:19:36+00:00

[ Upstream commit 1aec30021edd410b986c156f195f3d23959a9d11 ] ext4_inode_attach_jinode() publishes ei->jinode to concurrent users. It used to set ei->jinode before jbd2_journal_init_jbd_inode(), allowing a reader to observe a non-NULL jinode with i_vfs_inode still unset. The fast commit flush path can then pass this jinode to jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and may crash. Below is the crash I observe: ``` BUG: unable to handle page fault for address: 000000010beb47f4 PGD 110e51067 P4D 110e51067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 RIP: 0010:xas_find_marked+0x3d/0x2e0 Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02 RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246 RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003 RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10 RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000 R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88 FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: filemap_get_folios_tag+0x87/0x2a0 __filemap_fdatawait_range+0x5f/0xd0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __schedule+0x3e7/0x10c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? cap_safe_nice+0x37/0x70 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 filemap_fdatawait_range_keep_errors+0x12/0x40 ext4_fc_commit+0x697/0x8b0 ? ext4_file_write_iter+0x64b/0x950 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? vfs_write+0x356/0x480 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ext4_sync_file+0xf7/0x370 do_fsync+0x3b/0x80 ? syscall_trace_enter+0x108/0x1d0 __x64_sys_fdatasync+0x16/0x20 do_syscall_64+0x62/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... ``` Fix this by initializing the jbd2_inode first. Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after initialization. Readers use READ_ONCE() to fetch the pointer. Fixes: a361293f5fede ("jbd2: Fix oops in jbd2_journal_file_inode()") Cc: stable@vger.kernel.org Signed-off-by: Li Chen Reviewed-by: Jan Kara Link: https://patch.msgid.link/20260225082617.147957-1-me@linux.beauty Signed-off-by: Theodore Ts'o Cc: stable@kernel.org [ adapted READ_ONCE(ei->jinode) to use pos->jinode ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ext4: always drain queued discard work in ext4_mb_release()

2026-04-02T11:07:29+00:00

commit 9ee29d20aab228adfb02ca93f87fb53c56c2f3af upstream. While reviewing recent ext4 patch[1], Sashiko raised the following concern[2]: > If the filesystem is initially mounted with the discard option, > deleting files will populate sbi->s_discard_list and queue > s_discard_work. If it is then remounted with nodiscard, the > EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is > neither cancelled nor flushed. [1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/ [2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev The concern was valid, but it had nothing to do with the patch[1]. One of the problems with Sashiko in its current (early) form is that it will detect pre-existing issues and report it as a problem with the patch that it is reviewing. In practice, it would be hard to hit deliberately (unless you are a malicious syzkaller fuzzer), since it would involve mounting the file system with -o discard, and then deleting a large number of files, remounting the file system with -o nodiscard, and then immediately unmounting the file system before the queued discard work has a change to drain on its own. Fix it because it's a real bug, and to avoid Sashiko from raising this concern when analyzing future patches to mballoc.c. Signed-off-by: Theodore Ts'o Fixes: 55cdd0af2bc5 ("ext4: get discard out of jbd2 commit kthread contex") Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman

ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths

2026-04-02T11:07:29+00:00

commit ec0a7500d8eace5b4f305fa0c594dd148f0e8d29 upstream. During code review, Joseph found that ext4_fc_replay_inode() calls ext4_get_fc_inode_loc() to get the inode location, which holds a reference to iloc.bh that must be released via brelse(). However, several error paths jump to the 'out' label without releasing iloc.bh: - ext4_handle_dirty_metadata() failure - sync_dirty_buffer() failure - ext4_mark_inode_used() failure - ext4_iget() failure Fix this by introducing an 'out_brelse' label placed just before the existing 'out' label to ensure iloc.bh is always released. Additionally, make ext4_fc_replay_inode() propagate errors properly instead of always returning 0. Reported-by: Joseph Qi Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Signed-off-by: Baokun Li Reviewed-by: Zhang Yi Reviewed-by: Jan Kara Link: https://patch.msgid.link/20260323060836.3452660-1-libaokun@linux.alibaba.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman