kernel/linux.git/fs/ext4, branch v3.12.56

ext4: fix potential integer overflow

2016-02-24T09:23:19+00:00

commit 46901760b46064964b41015d00c140c83aa05bcf upstream. Since sizeof(ext_new_group_data) > sizeof(ext_new_flex_group_data), integer overflow could be happened. Therefore, need to fix integer overflow sanitization. Signed-off-by: Insu Yun Signed-off-by: Theodore Ts'o Signed-off-by: Jiri Slaby

ext4: Fix handling of extended tv_sec

2016-02-23T16:54:32+00:00

commit a4dad1ae24f850410c4e60f22823cba1289b8d52 upstream. In ext4, the bottom two bits of {a,c,m}time_extra are used to extend the {a,c,m}time fields, deferring the year 2038 problem to the year 2446. When decoding these extended fields, for times whose bottom 32 bits would represent a negative number, sign extension causes the 64-bit extended timestamp to be negative as well, which is not what's intended. This patch corrects that issue, so that the only negative {a,c,m}times are those between 1901 and 1970 (as per 32-bit signed timestamps). Some older kernels might have written pre-1970 dates with 1,1 in the extra bits. This patch treats those incorrectly-encoded dates as pre-1970, instead of post-2311, until kernel 4.20 is released. Hopefully by then e2fsck will have fixed up the bad data. Also add a comment explaining the encoding of ext4's extra {a,c,m}time bits. Signed-off-by: David Turner Signed-off-by: Theodore Ts'o Reported-by: Mark Harris Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23732 Signed-off-by: Jiri Slaby

fix calculation of meta_bg descriptor backups

2016-02-15T16:07:50+00:00

commit 904dad4742d211b7a8910e92695c0fa957483836 upstream. "group" is the group where the backup will be placed, and is initialized to zero in the declaration. This meant that backups for meta_bg descriptors were erroneously written to the backup block group descriptors in groups 1 and (desc_per_block-1). Reproduction information: mke2fs -Fq -t ext4 -b 1024 -O ^resize_inode /tmp/foo.img 16G truncate -s 24G /tmp/foo.img losetup /dev/loop0 /tmp/foo.img mount /dev/loop0 /mnt resize2fs /dev/loop0 umount /dev/loop0 dd if=/dev/zero of=/dev/loop0 bs=1024 count=2 e2fsck -fy /dev/loop0 losetup -d /dev/loop0 Signed-off-by: Andy Leiserson Signed-off-by: Theodore Ts'o Signed-off-by: Jiri Slaby

ext4, jbd2: ensure entering into panic after recording an error in superblock

2016-01-05T16:48:50+00:00

commit 4327ba52afd03fc4b5afa0ee1d774c9c5b0e85c5 upstream. If a EXT4 filesystem utilizes JBD2 journaling and an error occurs, the journaling will be aborted first and the error number will be recorded into JBD2 superblock and, finally, the system will enter into the panic state in "errors=panic" option. But, in the rare case, this sequence is little twisted like the below figure and it will happen that the system enters into panic state, which means the system reset in mobile environment, before completion of recording an error in the journal superblock. In this case, e2fsck cannot recognize that the filesystem failure occurred in the previous run and the corruption wouldn't be fixed. Task A Task B ext4_handle_error() -> jbd2_journal_abort() -> __journal_abort_soft() -> __jbd2_journal_abort_hard() | -> journal->j_flags |= JBD2_ABORT; | | __ext4_abort() | -> jbd2_journal_abort() | | -> __journal_abort_soft() | | -> if (journal->j_flags & JBD2_ABORT) | | return; | -> panic() | -> jbd2_journal_update_sb_errno() Tested-by: Hobin Woo Signed-off-by: Daeho Jeong Signed-off-by: Theodore Ts'o Signed-off-by: Jiri Slaby

ext4: fix potential use after free in __ext4_journal_stop

2016-01-05T16:48:49+00:00

commit 6934da9238da947628be83635e365df41064b09b upstream. There is a use-after-free possibility in __ext4_journal_stop() in the case that we free the handle in the first jbd2_journal_stop() because we're referencing handle->h_err afterwards. This was introduced in 9705acd63b125dee8b15c705216d7186daea4625 and it is wrong. Fix it by storing the handle->h_err value beforehand and avoid referencing potentially freed handle. Fixes: 9705acd63b125dee8b15c705216d7186daea4625 Signed-off-by: Lukas Czerner Reviewed-by: Andreas Dilger Signed-off-by: Jiri Slaby

ext4: move check under lock scope to close a race.

2015-09-18T07:26:31+00:00

commit 280227a75b56ab5d35854f3a77ef74a7ad56a203 upstream fallocate() checks that the file is extent-based and returns EOPNOTSUPP in case is not. Other tasks can convert from and to indirect and extent so it's safe to check only after grabbing the inode mutex. [Nikolay Borisov: Bakported to 3.12.47 - Adjusted context - Add the 'out' label] Signed-off-by: Davide Italiano Signed-off-by: Theodore Ts'o Signed-off-by: Nikolay Borisov Cc: Jan Kara Signed-off-by: Jiri Slaby

ext4: replace open coded nofail allocation in ext4_free_blocks()

2015-08-04T14:52:04+00:00

commit 7444a072c387a93ebee7066e8aee776954ab0e41 upstream. ext4_free_blocks is looping around the allocation request and mimics __GFP_NOFAIL behavior without any allocation fallback strategy. Let's remove the open coded loop and replace it with __GFP_NOFAIL. Without the flag the allocator has no way to find out never-fail requirement and cannot help in any way. Signed-off-by: Michal Hocko Signed-off-by: Theodore Ts'o Signed-off-by: Jiri Slaby

ext4: correctly migrate a file with a hole at the beginning

2015-08-04T14:52:03+00:00

commit 8974fec7d72e3e02752fe0f27b4c3719c78d9a15 upstream. Currently ext4_ind_migrate() doesn't correctly handle a file which contains a hole at the beginning of the file. This caused the migration to be done incorrectly, and then if there is a subsequent following delayed allocation write to the "hole", this would reclaim the same data blocks again and results in fs corruption. # assmuing 4k block size ext4, with delalloc enabled # skip the first block and write to the second block xfs_io -fc "pwrite 4k 4k" -c "fsync" /mnt/ext4/testfile # converting to indirect-mapped file, which would move the data blocks # to the beginning of the file, but extent status cache still marks # that region as a hole chattr -e /mnt/ext4/testfile # delayed allocation writes to the "hole", reclaim the same data block # again, results in i_blocks corruption xfs_io -c "pwrite 0 4k" /mnt/ext4/testfile umount /mnt/ext4 e2fsck -nf /dev/sda6 ... Inode 53, i_blocks is 16, should be 8. Fix? no ... Signed-off-by: Eryu Guan Signed-off-by: Theodore Ts'o Signed-off-by: Jiri Slaby

ext4: be more strict when migrating to non-extent based file

2015-08-04T14:52:03+00:00

commit d6f123a9297496ad0b6335fe881504c4b5b2a5e5 upstream. Currently the check in ext4_ind_migrate() is not enough before doing the real conversion: a) delayed allocated extents could bypass the check on eh->eh_entries and eh->eh_depth This can be demonstrated by this script xfs_io -fc "pwrite 0 4k" -c "pwrite 8k 4k" /mnt/ext4/testfile chattr -e /mnt/ext4/testfile where testfile has two extents but still be converted to non-extent based file format. b) only extent length is checked but not the offset, which would result in data lose (delalloc) or fs corruption (nodelalloc), because non-extent based file only supports at most (12 + 2^10 + 2^20 + 2^30) blocks This can be demostrated by xfs_io -fc "pwrite 5T 4k" /mnt/ext4/testfile chattr -e /mnt/ext4/testfile sync If delalloc is enabled, dmesg prints EXT4-fs warning (device dm-4): ext4_block_to_path:105: block 1342177280 > max in inode 53 EXT4-fs (dm-4): Delayed block allocation failed for inode 53 at logical offset 1342177280 with max blocks 1 with error 5 EXT4-fs (dm-4): This should not happen!! Data will be lost If delalloc is disabled, e2fsck -nf shows corruption Inode 53, i_size is 5497558142976, should be 4096. Fix? no Fix the two issues by a) forcing all delayed allocation blocks to be allocated before checking eh->eh_depth and eh->eh_entries b) limiting the last logical block of the extent is within direct map Signed-off-by: Eryu Guan Signed-off-by: Theodore Ts'o Signed-off-by: Jiri Slaby

ext4: fix reservation release on invalidatepage for delalloc fs

2015-08-04T14:52:02+00:00

commit 9705acd63b125dee8b15c705216d7186daea4625 upstream. On delalloc enabled file system on invalidatepage operation in ext4_da_page_release_reservation() we want to clear the delayed buffer and remove the extent covering the delayed buffer from the extent status tree. However currently there is a bug where on the systems with page size > block size we will always remove extents from the start of the page regardless where the actual delayed buffers are positioned in the page. This leads to the errors like this: EXT4-fs warning (device loop0): ext4_da_release_space:1225: ext4_da_release_space: ino 13, to_free 1 with only 0 reserved data blocks This however can cause data loss on writeback time if the file system is in ENOSPC condition because we're releasing reservation for someones else delayed buffer. Fix this by only removing extents that corresponds to the part of the page we want to invalidate. This problem is reproducible by the following fio receipt (however I was only able to reproduce it with fio-2.1 or older. [global] bs=8k iodepth=1024 iodepth_batch=60 randrepeat=1 size=1m directory=/mnt/test numjobs=20 [job1] ioengine=sync bs=1k direct=1 rw=randread filename=file1:file2 [job2] ioengine=libaio rw=randwrite direct=1 filename=file1:file2 [job3] bs=1k ioengine=posixaio rw=randwrite direct=1 filename=file1:file2 [job5] bs=1k ioengine=sync rw=randread filename=file1:file2 [job7] ioengine=libaio rw=randwrite filename=file1:file2 [job8] ioengine=posixaio rw=randwrite filename=file1:file2 [job10] ioengine=mmap rw=randwrite bs=1k filename=file1:file2 [job11] ioengine=mmap rw=randwrite direct=1 filename=file1:file2 Signed-off-by: Lukas Czerner Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara Signed-off-by: Jiri Slaby