kernel/linux.git/fs/ext4/ialloc.c, branch linux-5.11.y

ext4: allow the dax flag to be set and cleared on inline directories

2021-05-12T06:37:37+00:00

commit 4811d9929cdae4238baf5b2522247bd2f9fa7b50 upstream. This is needed to allow generic/607 to pass for file systems with the inline data_feature enabled, and it allows the use of file systems where the directories use inline_data, while the files are accessed via DAX. Cc: stable@kernel.org Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

ext4: fix check to prevent false positive report of incorrect used inodes

2021-05-12T06:37:36+00:00

commit a149d2a5cabbf6507a7832a1c4fd2593c55fd450 upstream. Commit <50122847007> ("ext4: fix check to prevent initializing reserved inodes") check the block group zero and prevent initializing reserved inodes. But in some special cases, the reserved inode may not all belong to the group zero, it may exist into the second group if we format filesystem below. mkfs.ext4 -b 4096 -g 8192 -N 1024 -I 4096 /dev/sda So, it will end up triggering a false positive report of a corrupted file system. This patch fix it by avoid check reserved inodes if no free inode blocks will be zeroed. Cc: stable@kernel.org Fixes: 50122847007 ("ext4: fix check to prevent initializing reserved inodes") Signed-off-by: Zhang Yi Suggested-by: Jan Kara Link: https://lore.kernel.org/r/20210331121516.2243099-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

2020-10-22T17:31:08+00:00

Pull ext4 updates from Ted Ts'o: "The siginificant new ext4 feature this time around is Harshad's new fast_commit mode. In addition, thanks to Mauricio for fixing a race where mmap'ed pages that are being changed in parallel with a data=journal transaction commit could result in bad checksums in the failure that could cause journal replays to fail. Also notable is Ritesh's buffered write optimization which can result in significant improvements on parallel write workloads. (The kernel test robot reported a 330.6% improvement on fio.write_iops on a 96 core system using DAX) Besides that, we have the usual miscellaneous cleanups and bug fixes" Link: https://lore.kernel.org/r/20200925071217.GO28663@shao2-debian * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits) ext4: fix invalid inode checksum ext4: add fast commit stats in procfs ext4: add a mount opt to forcefully turn fast commits on ext4: fast commit recovery path jbd2: fast commit recovery path ext4: main fast-commit commit path jbd2: add fast commit machinery ext4 / jbd2: add fast commit initialization ext4: add fast_commit feature and handling for extended mount options doc: update ext4 and journalling docs to include fast commit feature ext4: Detect already used quota file early jbd2: avoid transaction reuse after reformatting ext4: use the normal helper to get the actual inode ext4: fix bs < ps issue reported with dioread_nolock mount opt ext4: data=journal: write-protect pages on j_submit_inode_data_buffers() ext4: data=journal: fixes for ext4_page_mkwrite() jbd2, ext4, ocfs2: introduce/use journal callbacks j_submit|finish_inode_data_buffers() jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers() ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable() ext4: use ext4_sb_bread() instead of sb_bread() ...

ext4: fast commit recovery path

2020-10-22T03:22:38+00:00

This patch adds fast commit recovery path support for Ext4 file system. We add several helper functions that are similar in spirit to e2fsprogs journal recovery path handlers. Example of such functions include - a simple block allocator, idempotent block bitmap update function etc. Using these routines and the fast commit log in the fast commit area, the recovery path (ext4_fc_replay()) performs fast commit log recovery. Reported-by: kernel test robot Signed-off-by: Harshad Shirwadkar Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o

ext4: use common helpers in all places reading metadata buffers

2020-10-18T14:37:14+00:00

Revome all open codes that read metadata buffers, switch to use ext4_read_bh_*() common helpers. Signed-off-by: zhangyi (F) Suggested-by: Jan Kara Link: https://lore.kernel.org/r/20200924073337.861472-4-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o

ext4: clear buffer verified flag if read meta block from disk

2020-10-18T14:37:13+00:00

The metadata buffer is no longer trusted after we read it from disk again because it is not uptodate for some reasons (e.g. failed to write back). Otherwise we may get below memory corruption problem in ext4_ext_split()->memset() if we read stale data from the newly allocated extent block on disk which has been failed to async write out but miss verify again since the verified bit has already been set on the buffer. [ 29.774674] BUG: unable to handle kernel paging request at ffff88841949d000 ... [ 29.783317] Oops: 0002 [#2] SMP [ 29.784219] R10: 00000000000f4240 R11: 0000000000002e28 R12: ffff88842fa1c800 [ 29.784627] CPU: 1 PID: 126 Comm: kworker/u4:3 Tainted: G D W [ 29.785546] R13: ffffffff9cddcc20 R14: ffffffff9cddd420 R15: ffff88842fa1c2f8 [ 29.786679] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS ?-20190727_0738364 [ 29.787588] FS: 0000000000000000(0000) GS:ffff88842fa00000(0000) knlGS:0000000000000000 [ 29.789288] Workqueue: writeback wb_workfn [ 29.790319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.790321] (flush-8:0) [ 29.790844] CR2: 0000000000000008 CR3: 00000004234f2000 CR4: 00000000000006f0 [ 29.791924] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.792839] RIP: 0010:__memset+0x24/0x30 [ 29.793739] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.794256] Code: 90 90 90 90 90 90 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 033 [ 29.795161] Kernel panic - not syncing: Fatal exception in interrupt ... [ 29.808149] Call Trace: [ 29.808475] ext4_ext_insert_extent+0x102e/0x1be0 [ 29.809085] ext4_ext_map_blocks+0xa89/0x1bb0 [ 29.809652] ext4_map_blocks+0x290/0x8a0 [ 29.809085] ext4_ext_map_blocks+0xa89/0x1bb0 [ 29.809652] ext4_map_blocks+0x290/0x8a0 [ 29.810161] ext4_writepages+0xc85/0x17c0 ... Fix this by clearing buffer's verified bit if we read meta block from disk again. Signed-off-by: zhangyi (F) Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200924073337.861472-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o

ext4: use fscrypt_prepare_new_inode() and fscrypt_set_context()

2020-09-22T13:48:33+00:00

Convert ext4 to use the new functions fscrypt_prepare_new_inode() and fscrypt_set_context(). This avoids calling fscrypt_get_encryption_info() from within a transaction, which can deadlock because fscrypt_get_encryption_info() isn't GFP_NOFS-safe. For more details about this problem, see the earlier patch "fscrypt: add fscrypt_prepare_new_inode() and fscrypt_set_context()". Link: https://lore.kernel.org/r/20200917041136.178600-4-ebiggers@kernel.org Signed-off-by: Eric Biggers

ext4: factor out ext4_xattr_credits_for_new_inode()

2020-09-22T13:48:32+00:00

To compute a new inode's xattr credits, we need to know whether the inode will be encrypted or not. When we switch to use the new helper function fscrypt_prepare_new_inode(), we won't find out whether the inode will be encrypted until slightly later than is currently the case. That will require moving the code block that computes the xattr credits. To make this easier and reduce the length of __ext4_new_inode(), move this code block into a new function ext4_xattr_credits_for_new_inode(). Link: https://lore.kernel.org/r/20200917041136.178600-3-ebiggers@kernel.org Signed-off-by: Eric Biggers

Merge tag 'ext4-for-linus-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

2020-06-15T16:32:10+00:00

Pull more ext4 updates from Ted Ts'o: "This is the second round of ext4 commits for 5.8 merge window [1]. It includes the per-inode DAX support, which was dependant on the DAX infrastructure which came in via the XFS tree, and a number of regression and bug fixes; most notably the "BUG: using smp_processor_id() in preemptible code in ext4_mb_new_blocks" reported by syzkaller" [1] The pull request actually came in 15 minutes after I had tagged the rc1 release. Tssk, tssk, late.. - Linus * tag 'ext4-for-linus-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4, jbd2: ensure panic by fix a race between jbd2 abort and ext4 error handlers ext4: support xattr gnu.* namespace for the Hurd ext4: mballoc: Use this_cpu_read instead of this_cpu_ptr ext4: avoid utf8_strncasecmp() with unstable name ext4: stop overwrite the errcode in ext4_setup_super ext4: fix partial cluster initialization when splitting extent ext4: avoid race conditions when remounting with options that change dax Documentation/dax: Update DAX enablement for ext4 fs/ext4: Introduce DAX inode flag fs/ext4: Remove jflag variable fs/ext4: Make DAX mount option a tri-state fs/ext4: Only change S_DAX on inode load fs/ext4: Update ext4_should_use_dax() fs/ext4: Change EXT4_MOUNT_DAX to EXT4_MOUNT_DAX_ALWAYS fs/ext4: Disallow verity if inode is DAX fs/ext4: Narrow scope of DAX check in setflags

Enable ext4 support for per-file/directory dax operations

2020-06-11T14:51:44+00:00

This adds the same per-file/per-directory DAX support for ext4 as was done for xfs, now that we finally have consensus over what the interface should be.