kernel/linux.git/fs/efivarfs, branch v6.19.11

efivarfs: fix error propagation in efivar_entry_get()

2026-01-19T07:40:36+00:00

efivar_entry_get() always returns success even if the underlying __efivar_entry_get() fails, masking errors. This may result in uninitialized heap memory being copied to userspace in the efivarfs_file_read() path. Fix it by returning the error from __efivar_entry_get(). Fixes: 2d82e6227ea1 ("efi: vars: Move efivar caching layer into efivarfs") Cc: # v6.1+ Signed-off-by: Kohei Enju Signed-off-by: Ard Biesheuvel

Merge tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2025-12-05T22:36:21+00:00

Pull persistent dentry infrastructure and conversion from Al Viro: "Some filesystems use a kinda-sorta controlled dentry refcount leak to pin dentries of created objects in dcache (and undo it when removing those). A reference is grabbed and not released, but it's not actually _stored_ anywhere. That works, but it's hard to follow and verify; among other things, we have no way to tell _which_ of the increments is intended to be an unpaired one. Worse, on removal we need to decide whether the reference had already been dropped, which can be non-trivial if that removal is on umount and we need to figure out if this dentry is pinned due to e.g. unlink() not done. Usually that is handled by using kill_litter_super() as ->kill_sb(), but there are open-coded special cases of the same (consider e.g. /proc/self). Things get simpler if we introduce a new dentry flag (DCACHE_PERSISTENT) marking those "leaked" dentries. Having it set claims responsibility for +1 in refcount. The end result this series is aiming for: - get these unbalanced dget() and dput() replaced with new primitives that would, in addition to adjusting refcount, set and clear persistency flag. - instead of having kill_litter_super() mess with removing the remaining "leaked" references (e.g. for all tmpfs files that hadn't been removed prior to umount), have the regular shrink_dcache_for_umount() strip DCACHE_PERSISTENT of all dentries, dropping the corresponding reference if it had been set. After that kill_litter_super() becomes an equivalent of kill_anon_super(). Doing that in a single step is not feasible - it would affect too many places in too many filesystems. It has to be split into a series. This work has really started early in 2024; quite a few preliminary pieces have already gone into mainline. This chunk is finally getting to the meat of that stuff - infrastructure and most of the conversions to it. Some pieces are still sitting in the local branches, but the bulk of that stuff is here" * tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) d_make_discardable(): warn if given a non-persistent dentry kill securityfs_recursive_remove() convert securityfs get rid of kill_litter_super() convert rust_binderfs convert nfsctl convert rpc_pipefs convert hypfs hypfs: swich hypfs_create_u64() to returning int hypfs: switch hypfs_create_str() to returning int hypfs: don't pin dentries twice convert gadgetfs gadgetfs: switch to simple_remove_by_name() convert functionfs functionfs: switch to simple_remove_by_name() functionfs: fix the open/removal races functionfs: need to cancel ->reset_work in ->kill_sb() functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}() functionfs: don't abuse ffs_data_closed() on fs shutdown convert selinuxfs ...

convert efivarfs

2025-11-16T06:35:04+00:00

Initially filesystem is populated with d_alloc_name() + d_add(). That becomes d_alloc_name() + d_make_persistent() + dput(). Dynamic creation is switched to d_make_persistent(); removal - to simple_unlink() (no point open-coding it in efivarfs_unlink(), better call it there) Signed-off-by: Al Viro

power: always freeze efivarfs

2025-11-12T09:12:39+00:00

The efivarfs filesystems must always be frozen and thawed to resync variable state. Make it so. Link: https://patch.msgid.link/20251105-vorbild-zutreffen-fe00d1dd98db@brauner Signed-off-by: Christian Brauner

Merge tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

2025-09-29T16:03:07+00:00

Pull misc vfs updates from Christian Brauner: "This contains the usual selections of misc updates for this cycle. Features: - Add "initramfs_options" parameter to set initramfs mount options. This allows to add specific mount options to the rootfs to e.g., limit the memory size - Add RWF_NOSIGNAL flag for pwritev2() Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE signal from being raised when writing on disconnected pipes or sockets. The flag is handled directly by the pipe filesystem and converted to the existing MSG_NOSIGNAL flag for sockets - Allow to pass pid namespace as procfs mount option Ever since the introduction of pid namespaces, procfs has had very implicit behaviour surrounding them (the pidns used by a procfs mount is auto-selected based on the mounting process's active pidns, and the pidns itself is basically hidden once the mount has been constructed) This implicit behaviour has historically meant that userspace was required to do some special dances in order to configure the pidns of a procfs mount as desired. Examples include: * In order to bypass the mnt_too_revealing() check, Kubernetes creates a procfs mount from an empty pidns so that user namespaced containers can be nested (without this, the nested containers would fail to mount procfs) But this requires forking off a helper process because you cannot just one-shot this using mount(2) * Container runtimes in general need to fork into a container before configuring its mounts, which can lead to security issues in the case of shared-pidns containers (a privileged process in the pidns can interact with your container runtime process) While SUID_DUMP_DISABLE and user namespaces make this less of an issue, the strict need for this due to a minor uAPI wart is kind of unfortunate Things would be much easier if there was a way for userspace to just specify the pidns they want. So this pull request contains changes to implement a new "pidns" argument which can be set using fsconfig(2): fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd); fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0); or classic mount(2) / mount(8): // mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid"); Cleanups: - Remove the last references to EXPORT_OP_ASYNC_LOCK - Make file_remove_privs_flags() static - Remove redundant __GFP_NOWARN when GFP_NOWAIT is used - Use try_cmpxchg() in start_dir_add() - Use try_cmpxchg() in sb_init_done_wq() - Replace offsetof() with struct_size() in ioctl_file_dedupe_range() - Remove vfs_ioctl() export - Replace rwlock() with spinlock in epoll code as rwlock causes priority inversion on preempt rt kernels - Make ns_entries in fs/proc/namespaces const - Use a switch() statement() in init_special_inode() just like we do in may_open() - Use struct_size() in dir_add() in the initramfs code - Use str_plural() in rd_load_image() - Replace strcpy() with strscpy() in find_link() - Rename generic_delete_inode() to inode_just_drop() and generic_drop_inode() to inode_generic_drop() - Remove unused arguments from fcntl_{g,s}et_rw_hint() Fixes: - Document @name parameter for name_contains_dotdot() helper - Fix spelling mistake - Always return zero from replace_fd() instead of the file descriptor number - Limit the size for copy_file_range() in compat mode to prevent a signed overflow - Fix debugfs mount options not being applied - Verify the inode mode when loading it from disk in minixfs - Verify the inode mode when loading it from disk in cramfs - Don't trigger automounts with RESOLVE_NO_XDEV If openat2() was called with RESOLVE_NO_XDEV it didn't traverse through automounts, but could still trigger them - Add FL_RECLAIM flag to show_fl_flags() macro so it appears in tracepoints - Fix unused variable warning in rd_load_image() on s390 - Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD - Use ns_capable_noaudit() when determining net sysctl permissions - Don't call path_put() under namespace semaphore in listmount() and statmount()" * tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits) fcntl: trim arguments listmount: don't call path_put() under namespace semaphore statmount: don't call path_put() under namespace semaphore pid: use ns_capable_noaudit() when determining net sysctl permissions fs: rename generic_delete_inode() and generic_drop_inode() init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD initramfs: Replace strcpy() with strscpy() in find_link() initrd: Use str_plural() in rd_load_image() initramfs: Use struct_size() helper to improve dir_add() initrd: Fix unused variable warning in rd_load_image() on s390 fs: use the switch statement in init_special_inode() fs/proc/namespaces: make ns_entries const filelock: add FL_RECLAIM to show_fl_flags() macro eventpoll: Replace rwlock with spinlock selftests/proc: add tests for new pidns APIs procfs: add "pidns" mount option pidns: move is-ancestor logic to helper openat2: don't trigger automounts with RESOLVE_NO_XDEV namei: move cross-device check to __traverse_mounts namei: remove LOOKUP_NO_XDEV check from handle_mounts ...

fs: rename generic_delete_inode() and generic_drop_inode()

2025-09-15T14:09:42+00:00

generic_delete_inode() is rather misleading for what the routine is doing. inode_just_drop() should be much clearer. The new naming is inconsistent with generic_drop_inode(), so rename that one as well with inode_ as the suffix. No functional changes. Signed-off-by: Mateusz Guzik Reviewed-by: Jan Kara Signed-off-by: Christian Brauner

efivarfs: Fix slab-out-of-bounds in efivarfs_d_compare

2025-08-28T06:39:49+00:00

Observed on kernel 6.6 (present on master as well): BUG: KASAN: slab-out-of-bounds in memcmp+0x98/0xd0 Call trace: kasan_check_range+0xe8/0x190 __asan_loadN+0x1c/0x28 memcmp+0x98/0xd0 efivarfs_d_compare+0x68/0xd8 __d_lookup_rcu_op_compare+0x178/0x218 __d_lookup_rcu+0x1f8/0x228 d_alloc_parallel+0x150/0x648 lookup_open.isra.0+0x5f0/0x8d0 open_last_lookups+0x264/0x828 path_openat+0x130/0x3f8 do_filp_open+0x114/0x248 do_sys_openat2+0x340/0x3c0 __arm64_sys_openat+0x120/0x1a0 If dentry->d_name.len < EFI_VARIABLE_GUID_LEN , 'guid' can become negative, leadings to oob. The issue can be triggered by parallel lookups using invalid filename: T1 T2 lookup_open ->lookup simple_lookup d_add // invalid dentry is added to hash list lookup_open d_alloc_parallel __d_lookup_rcu __d_lookup_rcu_op_compare hlist_bl_for_each_entry_rcu // invalid dentry can be retrieved ->d_compare efivarfs_d_compare // oob Fix it by checking 'guid' before cmp. Fixes: da27a24383b2 ("efivarfs: guid part of filenames are case-insensitive") Signed-off-by: Li Nan Signed-off-by: Wu Guanghao Signed-off-by: Ard Biesheuvel

Merge tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

2025-07-28T22:24:14+00:00

Pull fileattr updates from Christian Brauner: "This introduces the new file_getattr() and file_setattr() system calls after lengthy discussions. Both system calls serve as successors and extensible companions to the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have started to show their age in addition to being named in a way that makes it easy to conflate them with extended attribute related operations. These syscalls allow userspace to set filesystem inode attributes on special files. One of the usage examples is the XFS quota projects. XFS has project quotas which could be attached to a directory. All new inodes in these directories inherit project ID set on parent directory. The project is created from userspace by opening and calling FS_IOC_FSSETXATTR on each inode. This is not possible for special files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left with empty project ID. Those inodes then are not shown in the quota accounting but still exist in the directory. This is not critical but in the case when special files are created in the directory with already existing project quota, these new inodes inherit extended attributes. This creates a mix of special files with and without attributes. Moreover, special files with attributes don't have a possibility to become clear or change the attributes. This, in turn, prevents userspace from re-creating quota project on these existing files. In addition, these new system calls allow the implementation of additional attributes that we couldn't or didn't want to fit into the legacy ioctls anymore" * tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: tighten a sanity check in file_attr_to_fileattr() tree-wide: s/struct fileattr/struct file_kattr/g fs: introduce file_getattr and file_setattr syscalls fs: prepare for extending file_get/setattr() fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP selinux: implement inode_file_[g|s]etattr hooks lsm: introduce new hooks for setting/getting inode fsxattr fs: split fileattr related helpers into separate file

Merge tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2025-07-28T16:17:57+00:00

Pull dentry d_flags updates from Al Viro: "The current exclusion rules for dentry->d_flags stores are rather unpleasant. The basic rules are simple: - stores to dentry->d_flags are OK under dentry->d_lock - stores to dentry->d_flags are OK in the dentry constructor, before becomes potentially visible to other threads Unfortunately, there's a couple of exceptions to that, and that's where the headache comes from. The main PITA comes from d_set_d_op(); that primitive sets ->d_op of dentry and adjusts the flags that correspond to presence of individual methods. It's very easy to misuse; existing uses _are_ safe, but proof of correctness is brittle. Use in __d_alloc() is safe (we are within a constructor), but we might as well precalculate the initial value of 'd_flags' when we set the default ->d_op for given superblock and set 'd_flags' directly instead of messing with that helper. The reasons why other uses are safe are bloody convoluted; I'm not going to reproduce it here. See [1] for gory details, if you care. The critical part is using d_set_d_op() only just prior to d_splice_alias(), which makes a combination of d_splice_alias() with setting ->d_op, etc a natural replacement primitive. Better yet, if we go that way, it's easy to take setting ->d_op and modifying 'd_flags' under ->d_lock, which eliminates the headache as far as 'd_flags' exclusion rules are concerned. Other exceptions are minor and easy to deal with. What this series does: - d_set_d_op() is no longer available; instead a new primitive (d_splice_alias_ops()) is provided, equivalent to combination of d_set_d_op() and d_splice_alias(). - new field of struct super_block - 's_d_flags'. This sets the default value of 'd_flags' to be used when allocating dentries on this filesystem. - new primitive for setting 's_d_op': set_default_d_op(). This replaces stores to 's_d_op' at mount time. All in-tree filesystems converted; out-of-tree ones will get caught by the compiler ('s_d_op' is renamed, so stores to it will be caught). 's_d_flags' is set by the same primitive to match the 's_d_op'. - a lot of filesystems had sb->s_d_op->d_delete equal to always_delete_dentry; that is equivalent to setting DCACHE_DONTCACHE in 'd_flags', so such filesystems can bloody well set that bit in 's_d_flags' and drop 'd_delete()' from dentry_operations. In quite a few cases that results in empty dentry_operations, which means that we can get rid of those. - kill simple_dentry_operations - not needed anymore - massage d_alloc_parallel() to get rid of the other exception wrt 'd_flags' stores - we can set DCACHE_PAR_LOOKUP as soon as we allocate the new dentry; no need to delay that until we commit to using the sucker. As the result, 'd_flags' stores are all either under ->d_lock or done before the dentry becomes visible in any shared data structures" Link: https://lore.kernel.org/all/20250224010624.GT1977892@ZenIV/ [1] * tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (21 commits) configfs: use DCACHE_DONTCACHE debugfs: use DCACHE_DONTCACHE efivarfs: use DCACHE_DONTCACHE instead of always_delete_dentry() 9p: don't bother with always_delete_dentry ramfs, hugetlbfs, mqueue: set DCACHE_DONTCACHE kill simple_dentry_operations devpts, sunrpc, hostfs: don't bother with ->d_op shmem: no dentry retention past the refcount reaching zero d_alloc_parallel(): set DCACHE_PAR_LOOKUP earlier make d_set_d_op() static simple_lookup(): just set DCACHE_DONTCACHE tracefs: Add d_delete to remove negative dentries set_default_d_op(): calculate the matching value for ->d_flags correct the set of flags forbidden at d_set_d_op() time split d_flags calculation out of d_set_d_op() new helper: set_default_d_op() fuse: no need for special dentry_operations for root dentry switch procfs from d_set_d_op() to d_splice_alias_ops() new helper: d_splice_alias_ops() procfs: kill ->proc_dops ...

efivarfs: Fix memory leak of efivarfs_fs_info in fs_context error paths

2025-07-18T10:00:20+00:00

When processing mount options, efivarfs allocates efivarfs_fs_info (sfi) early in fs_context initialization. However, sfi is associated with the superblock and typically freed when the superblock is destroyed. If the fs_context is released (final put) before fill_super is called—such as on error paths or during reconfiguration—the sfi structure would leak, as ownership never transfers to the superblock. Implement the .free callback in efivarfs_context_ops to ensure any allocated sfi is properly freed if the fs_context is torn down before fill_super, preventing this memory leak. Suggested-by: James Bottomley Fixes: 5329aa5101f73c ("efivarfs: Add uid/gid mount options") Signed-off-by: Breno Leitao Signed-off-by: Ard Biesheuvel