kernel/linux.git/fs/dlm/lockspace.c, branch v6.6.132

dlm: check for defined force value in dlm_lockspace_release

2025-10-29T13:07:00+00:00

[ Upstream commit 6af515c9f3ccec3eb8a262ca86bef2c499d07951 ] Force values over 3 are undefined, so don't treat them as 3. Signed-off-by: Alexander Aring Signed-off-by: David Teigland Signed-off-by: Sasha Levin

fs: dlm: revert check required context while close

2023-06-14T15:17:33+00:00

This patch reverts commit 2c3fa6ae4d52 ("dlm: check required context while close"). The function dlm_midcomms_close(), which will call later dlm_lowcomms_close(), is called when the cluster manager tells the node got fenced which means on midcomms/lowcomms layer to disconnect the node from the cluster communication. The node can rejoin the cluster later. This patch was ensuring no new message were able to be triggered when we are in the close() function context. This was done by checking if the lockspace has been stopped. However there is a missing check that we only need to check specific lockspaces where the fenced node is member of. This is currently complicated because there is no way to easily check if a node is part of a specific lockspace without stopping the recovery. For now we just revert this commit as it is just a check to finding possible leaks of stopping lockspaces before close() is called. Cc: stable@vger.kernel.org Fixes: 2c3fa6ae4d52 ("dlm: check required context while close") Signed-off-by: Alexander Aring Signed-off-by: David Teigland

fs: dlm: move internal flags to atomic ops

2023-03-06T21:49:07+00:00

This patch will move the lkb_flags value to the recently introduced lkb_iflags value. For lkb_iflags we use atomic bit operations because some flags like DLM_IFL_CB_PENDING are used while non rsb lock is held to avoid issues with other flag manipulations which might run at the same time we switch to atomic bit operations. Snapshot the bit values to an uint32_t value is only used for debugging/logging use cases and don't need to be 100% correct. Signed-off-by: Alexander Aring Signed-off-by: David Teigland

fs: dlm: rename stub to local message flag

2023-03-06T21:49:07+00:00

This patch renames DLM_IFL_STUB_MS to DLM_IFL_LOCAL_MS flag. The DLM_IFL_STUB_MS flag is somewhat misnamed, it means the dlm message is used for local message transfer only. It is used by recovery to resolve lock states if a node got fenced. Signed-off-by: Alexander Aring Signed-off-by: David Teigland

fs: dlm: remove deprecated code parts

2023-03-06T21:49:07+00:00

This patch removes code parts which was declared deprecated by commit 6b0afc0cc3e9 ("fs: dlm: don't use deprecated timeout features by default"). This contains the following dlm functionality: - start a cancel of a dlm request did not complete after certain timeout: The current way how dlm cancellation works and interfering with other dlm requests triggered by the user can end in an overlapping and returning in -EBUSY. The most user don't handle this case and are unaware that DLM can return such errno in such situation. Due the timeout the user are mostly unaware when this happens. - start a netlink warning messages for user space if dlm requests did not complete after certain timeout: This feature was never being built in the only known dlm user space side. As we are to remove the timeout cancellation feature we can directly remove this feature as well. There might be the possibility to bring the timeout cancellation feature back. However the current way of handling the -EBUSY case which is only a software limitation and not a hardware limitation should be changed. We minimize the current code base in DLM cancellation feature to not have to deal with those existing features while solving the DLM cancellation feature in general. UAPI define DLM_LSFL_TIMEWARN is commented as deprecated and reserved value. We should avoid at first to give it a new meaning but let possible users still compile by keeping this define. In far future we can give this flag a new meaning. The same for the DLM_LKF_TIMEOUT lock request flag. Signed-off-by: Alexander Aring Signed-off-by: David Teigland

Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-02-24T20:58:55+00:00

Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...

kobject: kset_uevent_ops: make uevent() callback take a const *

2023-01-27T12:45:53+00:00

The uevent() callback in struct kset_uevent_ops does not modify the kobject passed into it, so make the pointer const to enforce this restriction. When doing so, fix up all existing uevent() callbacks to have the correct signature to preserve the build. Cc: Christine Caulfield Cc: David Teigland Cc: Bob Peterson Cc: Andreas Gruenbacher Acked-by: Rafael J. Wysocki Acked-by: Hans de Goede Link: https://lore.kernel.org/r/20230111113018.459199-17-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

fs: dlm: make dlm sequence id more robust

2023-01-23T22:13:20+00:00

When joining a new lockspace, use a random number to initialize a sequence number used in messages. This makes it easier to detect sequence number mismatches in message replies during tests that repeatedly join and leave a lockspace. Signed-off-by: Alexander Aring Signed-off-by: David Teigland

fs: dlm: wait until all midcomms nodes detect version

2023-01-23T20:58:19+00:00

The current dlm version detection is very complex due to backwards compatablilty with earlier dlm protocol versions. It takes some time to detect if a peer node has a specific DLM version. If it's not detected, we just cut the socket connection. There could be cases where the local node has not detected the version yet, but the peer node has. In these cases, we are trying to shutdown the dlm connection with a FIN/ACK message exchange to be sure the other peer is ready to shutdown the connection on dlm application level. However this mechanism is only available on DLM protocol version 3.2 and we need to be sure the DLM version is detected before. To make it more robust we introduce a a "best effort" wait to wait for the version detection before shutdown the dlm connection. This need to be done before the kthread recoverd for recovery handling is stopped, because recovery handling will trigger enough messages to have a version detection going on. It is a corner case which was detected by modprobe dlm_locktroture module and rmmod dlm_locktorture module directly afterwards (in a looping behaviour). In practice probably nobody would leave a lockspace immediately after joining it. Signed-off-by: Alexander Aring Signed-off-by: David Teigland

fs: dlm: start midcomms before scand

2023-01-23T18:43:53+00:00

The scand kthread can send dlm messages out, especially dlm remove messages to free memory for unused rsb on other nodes. To send out dlm messages, midcomms must be initialized. This patch moves the midcomms start before scand is started. Cc: stable@vger.kernel.org Fixes: e7fd41792fc0 ("[DLM] The core of the DLM for GFS2/CLVM") Signed-off-by: Alexander Aring Signed-off-by: David Teigland