kernel/linux.git/fs/ceph/Makefile, branch v6.12.80

ceph: fscrypt_auth handling for ceph

2023-08-22T07:01:48+00:00

Most fscrypt-enabled filesystems store the crypto context in an xattr, but that's problematic for ceph as xatts are governed by the XATTR cap, but we really want the crypto context as part of the AUTH cap. Because of this, the MDS has added two new inode metadata fields: fscrypt_auth and fscrypt_file. The former is used to hold the crypto context, and the latter is used to track the real file size. Parse new fscrypt_auth and fscrypt_file fields in inode traces. For now, we don't use fscrypt_file, but fscrypt_auth is used to hold the fscrypt context. Allow the client to use a setattr request for setting the fscrypt_auth field. Since this is not a standard setattr request from the VFS, we add a new field to __ceph_setattr that carries ceph-specific inode attrs. Have the set_context op do a setattr that sets the fscrypt_auth value, and get_context just return the contents of that field (since it should always be available). Signed-off-by: Jeff Layton Reviewed-by: Xiubo Li Reviewed-and-tested-by: Luís Henriques Reviewed-by: Milind Changire Signed-off-by: Ilya Dryomov

ceph: add dentry lease metric support

2020-06-01T11:22:51+00:00

For dentry leases, only count the hit/miss info triggered from the vfs calls. For the cases like request reply handling and ceph_trim_dentries, ignore them. For now, these are only viewable using debugfs. Future patches will allow the client to send the stats to the MDS. The output looks like: item total miss hit ------------------------------------------------- d_lease 11 7 141 URL: https://tracker.ceph.com/issues/43215 Signed-off-by: Xiubo Li Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov

ceph: move net/ceph/ceph_fs.c to fs/ceph/util.c

2020-01-27T15:53:40+00:00

All of these functions are only called from CephFS, so move them into ceph.ko, and drop the exports. Signed-off-by: Jeff Layton Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov

ceph: add buffered/direct exclusionary locking for reads and writes

2019-09-16T10:06:25+00:00

xfstest generic/451 intermittently fails. The test does O_DIRECT writes to a file, and then reads back the result using buffered I/O, while running a separate set of tasks that are also doing buffered reads. The client will invalidate the cache prior to a direct write, but it's easy for one of the other readers' replies to race in and reinstantiate the invalidated range with stale data. To fix this, we must to serialize direct I/O writes and buffered reads. We could just sprinkle in some shared locks on the i_rwsem for reads, and increase the exclusive footprint on the write side, but that would cause O_DIRECT writes to end up serialized vs. other direct requests. Instead, borrow the scheme used by nfs.ko. Buffered writes take the i_rwsem exclusively, but buffered reads take a shared lock, allowing them to run in parallel. O_DIRECT requests also take a shared lock, but we need for them to not run in parallel with buffered reads. A flag on the ceph_inode_info is used to indicate whether it's in direct or buffered I/O mode. When a conflicting request is submitted, it will block until the inode can be flipped to the necessary mode. Link: https://tracker.ceph.com/issues/40985 Signed-off-by: Jeff Layton Reviewed-by: "Yan, Zheng" Signed-off-by: Ilya Dryomov

ceph: quota: add initial infrastructure to support cephfs quotas

2018-04-02T09:17:51+00:00

This patch adds the infrastructure required to support cephfs quotas as it is currently implemented in the ceph fuse client. Cephfs quotas can be set on any directory, and can restrict the number of bytes or the number of files stored beneath that point in the directory hierarchy. Quotas are set using the extended attributes 'ceph.quota.max_files' and 'ceph.quota.max_bytes', and can be removed by setting these attributes to '0'. Link: http://tracker.ceph.com/issues/22372 Signed-off-by: Luis Henriques Reviewed-by: "Yan, Zheng" Signed-off-by: Ilya Dryomov

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ceph: add acl for cephfs

2013-12-31T18:32:01+00:00

Signed-off-by: Guangliang Zhao Reviewed-by: Li Wang Reviewed-by: Zheng Yan

ceph: use fscache as a local presisent cache

2013-09-06T16:50:11+00:00

Adding support for fscache to the Ceph filesystem. This would bring it to on par with some of the other network filesystems in Linux (like NFS, AFS, etc...) In order to mount the filesystem with fscache the 'fsc' mount option must be passed. Signed-off-by: Milosz Tanski Signed-off-by: Sage Weil

ceph: Makefile: Remove unnessary code

2011-01-12T23:15:13+00:00

Remove the if and else conditional because the code is in mainline and there is no need in it being there. Also, Changed Makefile to use -y instead of -objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent Signed-off-by: Sage Weil

ceph: factor out libceph from Ceph file system

2010-10-20T22:37:28+00:00

This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil