kernel/linux.git/drivers, branch v6.6.66

i3c: master: svc: fix possible assignment of the same address to two devices

2024-12-14T19:00:23+00:00

commit 3b2ac810d86eb96e882db80a3320a3848b133208 upstream. svc_i3c_master_do_daa() { ... for (i = 0; i < dev_nb; i++) { ret = i3c_master_add_i3c_dev_locked(m, addrs[i]); if (ret) goto rpm_out; } } If two devices (A and B) are detected in DAA and address 0xa is assigned to device A and 0xb to device B, a failure in i3c_master_add_i3c_dev_locked() for device A (addr: 0xa) could prevent device B (addr: 0xb) from being registered on the bus. The I3C stack might still consider 0xb a free address. If a subsequent Hotjoin occurs, 0xb might be assigned to Device A, causing both devices A and B to use the same address 0xb, violating the I3C specification. The return value for i3c_master_add_i3c_dev_locked() should not be checked because subsequent steps will scan the entire I3C bus, independent of whether i3c_master_add_i3c_dev_locked() returns success. If device A registration fails, there is still a chance to register device B. i3c_master_add_i3c_dev_locked() can reset DAA if a failure occurs while retrieving device information. Cc: stable@kernel.org Fixes: 317bacf960a4 ("i3c: master: add enable(disable) hot join in sys entry") Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20241002-svc-i3c-hj-v6-6-7e6e1d3569ae@nxp.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin

2024-12-14T19:00:23+00:00

commit 36faa04ce3d9c962b4b29d285ad07ca29e2988e4 upstream. When a new device hotjoins, a new dynamic address is assigned. i3c_master_add_i3c_dev_locked() identifies that the device was previously attached to the bus and locates the olddev. i3c_master_add_i3c_dev_locked() { ... olddev = i3c_master_search_i3c_dev_duplicate(newdev); ... if (olddev) { ... i3c_dev_disable_ibi_locked(olddev); ^^^^^^ The olddev should not receive any commands on the i3c bus as it does not exist and has been assigned a new address. This will result in NACK or timeout. So remove it. } i3c_dev_free_ibi_locked(olddev); ^^^^^^^^ This function internally calls i3c_dev_disable_ibi_locked() function causing to send DISEC command with old Address. The olddev should not receive any commands on the i3c bus as it does not exist and has been assigned a new address. This will result in NACK or timeout. So, update the olddev->ibi->enabled flag to false to avoid DISEC with OldAddr. } Include part of Ravindra Yashvant Shinde's work: https://lore.kernel.org/linux-i3c/20240820151917.3904956-1-ravindra.yashvant.shinde@nxp.com/T/#u Fixes: 317bacf960a4 ("i3c: master: add enable(disable) hot join in sys entry") Co-developed-by: Ravindra Yashvant Shinde Signed-off-by: Ravindra Yashvant Shinde Reviewed-by: Miquel Raynal Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20241001162232.223724-1-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

serial: amba-pl011: fix build regression

2024-12-14T19:00:23+00:00

commit b5a23a60e8ab5711f4952912424347bf3864ce8d upstream. When CONFIG_DMA_ENGINE is disabled, the driver now fails to build: drivers/tty/serial/amba-pl011.c: In function 'pl011_unthrottle_rx': drivers/tty/serial/amba-pl011.c:1822:16: error: 'struct uart_amba_port' has no member named 'using_rx_dma' 1822 | if (uap->using_rx_dma) { | ^~ drivers/tty/serial/amba-pl011.c:1823:20: error: 'struct uart_amba_port' has no member named 'dmacr' 1823 | uap->dmacr |= UART011_RXDMAE; | ^~ drivers/tty/serial/amba-pl011.c:1824:32: error: 'struct uart_amba_port' has no member named 'dmacr' 1824 | pl011_write(uap->dmacr, uap, REG_DMACR); | ^~ Add the missing #ifdef check around these field accesses, matching what other parts of this driver do. Fixes: 2bcacc1c87ac ("serial: amba-pl011: Fix RX stall when DMA is used") Cc: stable Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202411140617.nkjeHhsK-lkp@intel.com/ Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20241115110021.744332-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman

platform/x86: asus-wmi: Fix thermal profile initialization

2024-12-14T19:00:23+00:00

commit b012170fed282151f7ba8988a347670c299f5ab3 upstream. When support for vivobook fan profiles was added, the initial call to throttle_thermal_policy_set_default() was removed, which however is necessary for full initialization. Fix this by calling throttle_thermal_policy_set_default() again when setting up the platform profile. Fixes: bcbfcebda2cb ("platform/x86: asus-wmi: add support for vivobook fan profiles") Reported-by: Michael Larabel Closes: https://www.phoronix.com/review/lunar-lake-xe2/5 Signed-off-by: Armin Wolf Link: https://lore.kernel.org/r/20241025191514.15032-2-W_Armin@gmx.de Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

usb: dwc3: ep0: Don't reset resource alloc flag

2024-12-14T19:00:22+00:00

commit f2e0eee4703869dc5edb5302a919861566ca7797 upstream. The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an endpoint is only assigned once. Unless the endpoint is reset, don't clear this flag. Otherwise we may set endpoint resource again, which prevents the driver from initiate transfer after handling a STALL or endpoint halt to the control endpoint. Cc: stable@vger.kernel.org Fixes: b311048c174d ("usb: dwc3: gadget: Rewrite endpoint allocation flow") Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/00122b7cc5be06abef461776e7cc9f5ebc8bc1cb.1713229786.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: rework resume handling for display (v2)

2024-12-14T19:00:22+00:00

commit 73dae652dcac776296890da215ee7dec357a1032 upstream. Split resume into a 3rd step to handle displays when DCC is enabled on DCN 4.0.1. Move display after the buffer funcs have been re-enabled so that the GPU will do the move and properly set the DCC metadata for DCN. v2: fix fence irq resume ordering Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org # 6.11.x Signed-off-by: Greg Kroah-Hartman

iio: invensense: fix multiple odr switch when FIFO is off

2024-12-14T19:00:21+00:00

commit ef5f5e7b6f73f79538892a8be3a3bee2342acc9f upstream. When multiple ODR switch happens during FIFO off, the change could not be taken into account if you get back to previous FIFO on value. For example, if you run sensor buffer at 50Hz, stop, change to 200Hz, then back to 50Hz and restart buffer, data will be timestamped at 200Hz. This due to testing against mult and not new_mult. To prevent this, let's just run apply_odr automatically when FIFO is off. It will also simplify driver code. Update inv_mpu6050 and inv_icm42600 to delete now useless apply_odr. Fixes: 95444b9eeb8c ("iio: invensense: fix odr switching to same value") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://patch.msgid.link/20241021-invn-inv-sensors-timestamp-fix-switch-fifo-off-v2-1-39ffd43edcc4@tdk.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

xhci: dbc: Fix STALL transfer event handling

2024-12-14T19:00:21+00:00

commit 9044ad57b60b0556d42b6f8aa218a68865e810a4 upstream. Don't flush all pending DbC data requests when an endpoint halts. An endpoint may halt and xHC DbC triggers a STALL error event if there's an issue with a bulk data transfer. The transfer should restart once xHC DbC receives a ClearFeature(ENDPOINT_HALT) request from the host. Once xHC DbC restarts it will start from the TRB pointed to by dequeue field in the endpoint context, which might be the same TRB we got the STALL event for. Turn the TRB to a no-op in this case to make sure xHC DbC doesn't reuse and tries to retransmit this same TRB after we already handled it, and gave its corresponding data request back. Other STALL events might be completely bogus. Lukasz Bartosik discovered that xHC DbC might issue spurious STALL events if hosts sends a ClearFeature(ENDPOINT_HALT) request to non-halted endpoints even without any active bulk transfers. Assume STALL event is spurious if it reports 0 bytes transferred, and the endpoint stopped on the STALLED TRB. Don't give back the data request corresponding to the TRB in this case. The halted status is per endpoint. Track it with a per endpoint flag instead of the driver invented DbC wide DS_STALLED state. DbC remains in DbC-Configured state even if endpoints halt. There is no Stalled state in the DbC Port state Machine (xhci section 7.6.6) Reported-by: Łukasz Bartosik Closes: https://lore.kernel.org/linux-usb/20240725074857.623299-1-ukaszb@chromium.org/ Tested-by: Łukasz Bartosik Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20240905143300.1959279-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

vfio/mlx5: Align the page tracking max message size with the device capability

2024-12-14T19:00:20+00:00

[ Upstream commit 9c7c5430bca36e9636eabbba0b3b53251479c7ab ] Align the page tracking maximum message size with the device's capability instead of relying on PAGE_SIZE. This adjustment resolves a mismatch on systems where PAGE_SIZE is 64K, but the firmware only supports a maximum message size of 4K. Now that we rely on the device's capability for max_message_size, we must account for potential future increases in its value. Key considerations include: - Supporting message sizes that exceed a single system page (e.g., an 8K message on a 4K system). - Ensuring the RQ size is adjusted to accommodate at least 4 WQEs/messages, in line with the device specification. The above has been addressed as part of the patch. Fixes: 79c3cf279926 ("vfio/mlx5: Init QP based resources for dirty tracking") Reviewed-by: Cédric Le Goater Tested-by: Yingshun Cui Signed-off-by: Yishai Hadas Link: https://lore.kernel.org/r/20241205122654.235619-1-yishaih@nvidia.com Signed-off-by: Alex Williamson Signed-off-by: Sasha Levin

clk: en7523: Initialize num before accessing hws in en7523_register_clocks()

2024-12-14T19:00:20+00:00

[ Upstream commit 52fd1709e41d3a85b48bcfe2404a024ebaf30c3b ] With the new __counted_by annotation in clk_hw_onecell_data, the "num" struct member must be set before accessing the "hws" array. Failing to do so will trigger a runtime warning when enabling CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE. Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") Signed-off-by: Haoyu Li Link: https://lore.kernel.org/r/20241203142915.345523-1-lihaoyu499@gmail.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin