kernel/linux.git/drivers, branch v6.19.3

USB: serial: option: add Telit FN920C04 RNDIS compositions

2026-02-19T15:33:26+00:00

commit 509f403f3ccec14188036212118651bf23599396 upstream. Add the following compositions: 0x10a1: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=d128dba9 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a6: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a6 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=d128dba9 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10ab: RNDIS + tty (AT) + tty (diag) + DPL (Data Packet Logging) + adb T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10ab Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=d128dba9 C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

iommu/arm-smmu-qcom: do not register driver in probe()

2026-02-19T15:33:26+00:00

commit ed1ac3c977dd6b119405fa36dd41f7151bd5b4de upstream. Commit 0b4eeee2876f ("iommu/arm-smmu-qcom: Register the TBU driver in qcom_smmu_impl_init") intended to also probe the TBU driver when CONFIG_ARM_SMMU_QCOM_DEBUG is disabled, but also moved the corresponding platform_driver_register() call into qcom_smmu_impl_init() which is called from arm_smmu_device_probe(). However, it neither makes sense to register drivers from probe() callbacks of other drivers, nor does the driver core allow registering drivers with a device lock already being held. The latter was revealed by commit dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()") leading to a deadlock condition described in [1]. Additionally, it was noted by Robin that the current approach is potentially racy with async probe [2]. Hence, fix this by registering the qcom_smmu_tbu_driver from module_init(). Unfortunately, due to the vendoring of the driver, this requires an indirection through arm-smmu-impl.c. Reported-by: Mark Brown Closes: https://lore.kernel.org/lkml/7ae38e31-ef31-43ad-9106-7c76ea0e8596@sirena.org.uk/ Link: https://lore.kernel.org/lkml/DFU7CEPUSG9A.1KKGVW4HIPMSH@kernel.org/ [1] Link: https://lore.kernel.org/lkml/0c0d3707-9ea5-44f9-88a1-a65c62e3df8d@arm.com/ [2] Fixes: dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()") Fixes: 0b4eeee2876f ("iommu/arm-smmu-qcom: Register the TBU driver in qcom_smmu_impl_init") Acked-by: Robin Murphy Tested-by: Bjorn Andersson Reviewed-by: Bjorn Andersson Acked-by: Konrad Dybcio Reviewed-by: Greg Kroah-Hartman Tested-by: Ioana Ciornei #LX2160ARDB Tested-by: Wang Jiayue Reviewed-by: Wang Jiayue Tested-by: Mark Brown Acked-by: Joerg Roedel Link: https://patch.msgid.link/20260121141215.29658-1-dakr@kernel.org Signed-off-by: Danilo Krummrich Signed-off-by: Greg Kroah-Hartman

fbdev: smscufx: properly copy ioctl memory to kernelspace

2026-02-19T15:33:24+00:00

commit 120adae7b42faa641179270c067864544a50ab69 upstream. The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from userspace to kernelspace, and instead directly references the memory, which can cause problems if invalid data is passed from userspace. Fix this all up by correctly copying the memory before accessing it within the kernel. Reported-by: Tianchu Chen Cc: stable Cc: Steve Glendinning Cc: Helge Deller Signed-off-by: Greg Kroah-Hartman Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

fbdev: rivafb: fix divide error in nv3_arb()

2026-02-19T15:33:24+00:00

commit 0209e21e3c372fa2da04c39214bec0b64e4eb5f4 upstream. A userspace program can trigger the RIVA NV3 arbitration code by calling the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz (derived from the PRAMDAC MCLK PLL) as a divisor without validating it first. In a normal setup, state->mclk_khz is provided by the real hardware and is non-zero. However, an attacker can construct a malicious or misconfigured device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL configuration, causing state->mclk_khz to become zero. Once nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns calculation causes a divide error and crashes the kernel. Fix this by checking whether state->mclk_khz is zero and bailing out before doing the division. The following log reveals it: rivafb: setting virtual Y resolution to 2184 divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline] RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546 Call Trace: nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603 nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline] CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246 riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779 rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196 fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188 __x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix bsg_done() causing double free

2026-02-19T15:33:24+00:00

commit c2c68225b1456f4d0d393b5a8778d51bb0d5b1d0 upstream. Kernel panic observed on system, [5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000 [5353358.825194] #PF: supervisor write access in kernel mode [5353358.825195] #PF: error_code(0x0002) - not-present page [5353358.825196] PGD 100006067 P4D 0 [5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI [5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1 [5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025 [5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10 [5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246 [5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000 [5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000 [5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000 [5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090 [5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000 [5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000 [5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0 [5353358.825221] PKRU: 55555554 [5353358.825222] Call Trace: [5353358.825223] [5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825232] ? sg_copy_buffer+0xc8/0x110 [5353358.825236] ? __die_body.cold+0x8/0xd [5353358.825238] ? page_fault_oops+0x134/0x170 [5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110 [5353358.825244] ? exc_page_fault+0xa8/0x150 [5353358.825247] ? asm_exc_page_fault+0x22/0x30 [5353358.825252] ? memcpy_erms+0x6/0x10 [5353358.825253] sg_copy_buffer+0xc8/0x110 [5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx] [5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx] Most routines in qla_bsg.c call bsg_done() only for success cases. However a few invoke it for failure case as well leading to a double free. Validate before calling bsg_done(). Cc: stable@vger.kernel.org Signed-off-by: Anil Gurumurthy Signed-off-by: Nilesh Javali Reviewed-by: Himanshu Madhani Link: https://patch.msgid.link/20251210101604.431868-12-njavali@marvell.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Revert "driver core: enforce device_lock for driver_match_device()"

2026-02-16T16:11:45+00:00

This reverts commit bc82e5f4d7dc8237ae8cabc73aa46fc93c85d98c which is commit dc23806a7c47ec5f1293aba407fb69519f976ee0 upstream. It causes boot regressions on some systems as all of the "fixes" for drivers are not properly backported yet. Once that is completed, only then can this be applied, if really necessary given the potential for explosions, perhaps we might want to wait a few -rc releases first... Cc: Danilo Krummrich Cc: Rafael J. Wysocki (Intel) Cc: Danilo Krummrich Cc: Gui-Dong Han Cc: Qiu-ji Chen Reported-by: Mark Brown Link: https://lore.kernel.org/r/7dfd0e63-a725-4fac-b2a0-f2e621d99d1b@sirena.org.uk Signed-off-by: Greg Kroah-Hartman

wifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_add

2026-02-16T09:13:34+00:00

commit 86c946bcc00f6390ef65e9614ae60a9377e454f8 upstream. The driver does not set hw->sta_data_size, which causes mac80211 to allocate insufficient space for driver private station data in __sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of struct rtl8xxxu_sta_info through sta->drv_priv, this results in a slab-out-of-bounds write. KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter: BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346 Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12 Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during probe, similar to how hw->vif_data_size is configured. This ensures mac80211 allocates sufficient space for the driver's per-station private data. Tested on StarFive VisionFive 2 v1.2A board. Fixes: eef55f1545c9 ("wifi: rtl8xxxu: support multiple interfaces in {add,remove}_interface()") Cc: stable@vger.kernel.org Signed-off-by: Ali Tariq Reviewed-by: Ping-Ke Shih Signed-off-by: Ping-Ke Shih Link: https://patch.msgid.link/20251225115430.13011-1-alitariq45892@gmail.com Signed-off-by: Greg Kroah-Hartman

PCI: endpoint: Avoid creating sub-groups asynchronously

2026-02-16T09:13:34+00:00

commit 7c5c7d06bd1f86d2c3ebe62be903a4ba42db4d2c upstream. The asynchronous creation of sub-groups by a delayed work could lead to a NULL pointer dereference when the driver directory is removed before the work completes. The crash can be easily reproduced with the following commands: # cd /sys/kernel/config/pci_ep/functions/pci_epf_test # for i in {1..20}; do mkdir test && rmdir test; done BUG: kernel NULL pointer dereference, address: 0000000000000088 ... Call Trace: configfs_register_group+0x3d/0x190 pci_epf_cfs_work+0x41/0x110 process_one_work+0x18f/0x350 worker_thread+0x25a/0x3a0 Fix this issue by using configfs_add_default_group() API which does not have the deadlock problem as configfs_register_group() and does not require the delayed work handler. Fixes: e85a2d783762 ("PCI: endpoint: Add support in configfs to associate two EPCs with EPF") Signed-off-by: Liu Song [mani: slightly reworded the description and added stable list] Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Cc: stable@kernel.org Link: https://patch.msgid.link/20250710143845409gLM6JdlwPhlHG9iX3F6jK@zte.com.cn Signed-off-by: Greg Kroah-Hartman

drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free

2026-02-16T09:13:34+00:00

commit 52b330799e2d6f825ae2bb74662ec1b10eb954bb upstream. Exynos Virtual Display driver performs memory alloc/free operations without lock protection, which easily causes concurrency problem. For example, use-after-free can occur in race scenario like this: ``` CPU0 CPU1 CPU2 ---- ---- ---- vidi_connection_ioctl() if (vidi->connection) // true drm_edid = drm_edid_alloc(); // alloc drm_edid ... ctx->raw_edid = drm_edid; ... drm_mode_getconnector() drm_helper_probe_single_connector_modes() vidi_get_modes() if (ctx->raw_edid) // true drm_edid_dup(ctx->raw_edid); if (!drm_edid) // false ... vidi_connection_ioctl() if (vidi->connection) // false drm_edid_free(ctx->raw_edid); // free drm_edid ... drm_edid_alloc(drm_edid->edid) kmemdup(edid); // UAF!! ... ``` To prevent these vulns, at least in vidi_context, member variables related to memory alloc/free should be protected with ctx->lock. Cc: Signed-off-by: Jeongjun Park Signed-off-by: Inki Dae Signed-off-by: Greg Kroah-Hartman

bus: fsl-mc: fix use-after-free in driver_override_show()

2026-02-16T09:13:33+00:00

commit 148891e95014b5dc5878acefa57f1940c281c431 upstream. The driver_override_show() function reads the driver_override string without holding the device_lock. However, driver_override_store() uses driver_set_override(), which modifies and frees the string while holding the device_lock. This can result in a concurrent use-after-free if the string is freed by the store function while being read by the show function. Fix this by holding the device_lock around the read operation. Fixes: 1f86a00c1159 ("bus/fsl-mc: add support for 'driver_override' in the mc-bus") Cc: stable@vger.kernel.org Signed-off-by: Gui-Dong Han Reviewed-by: Ioana Ciornei Link: https://lore.kernel.org/r/20251202174438.12658-1-hanguidong02@gmail.com Signed-off-by: Christophe Leroy (CS GROUP) Signed-off-by: Greg Kroah-Hartman