kernel/linux.git/drivers, branch v6.18.37

media: vidtv: fix NULL pointer dereference in vidtv_mux_push_si

2026-06-27T10:06:50+00:00

commit 7d8bf3d8f91073f4db347ed3aa6302b56107499c upstream. syzbot reported a general protection fault in vidtv_psi_ts_psi_write_into [1]. vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() does not check for this before dereferencing the returned pointer to access the continuity counter. This leads to a general protection fault when accessing a near-NULL address. The root cause is that vidtv_mux_pid_ctx_init() does not check the return value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs. If the allocation fails, the PID context is never created, but init returns success. The subsequent vidtv_mux_push_si() call then gets NULL from vidtv_mux_get_pid_ctx() and crashes. Fix both the root cause (add error check in vidtv_mux_pid_ctx_init for PMT PIDs) and add defensive NULL checks in vidtv_mux_push_si for all vidtv_mux_get_pid_ctx() calls. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: events vidtv_mux_tick RIP: 0010:vidtv_psi_ts_psi_write_into+0x54a/0xbc0 drivers/media/test-drivers/vidtv/vidtv_psi.c:197 Call Trace: vidtv_psi_table_header_write_into drivers/media/test-drivers/vidtv/vidtv_psi.c:799 [inline] vidtv_psi_pmt_write_into+0x3b2/0xa70 drivers/media/test-drivers/vidtv/vidtv_psi.c:1231 vidtv_mux_push_si+0x932/0xe80 drivers/media/test-drivers/vidtv/vidtv_mux.c:196 vidtv_mux_tick+0xe9b/0x1480 drivers/media/test-drivers/vidtv/vidtv_mux.c:408 Fixes: f90cf6079bf67 ("media: vidtv: add a bridge driver") Cc: stable@vger.kernel.org Reported-by: syzbot+814c351d094f4f1a1b86@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=814c351d094f4f1a1b86 Signed-off-by: Ruslan Valiyev Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman

drivers/base/memory: set mem->altmap after successful device registration

2026-06-27T10:06:50+00:00

commit a2b8d7827f48ee54a686cb80e4a1d0ff954ec42a upstream. If __add_memory_block() fails at xa_store() (under memory pressure for example), device_unregister() is called, which eventually triggers memory_block_release() with mem->altmap still set, causing a WARN_ON(mem->altmap). This was triggered by modifying virtio-mem driver. Fix this by delaying the assignment of mem->altmap until after __add_memory_block() has succeeded. Link: https://lore.kernel.org/20260514092657.3057141-1-georgi.djakov@oss.qualcomm.com Fixes: 1a8c64e11043 ("mm/memory_hotplug: embed vmem_altmap details in memory block") Signed-off-by: Georgi Djakov Acked-by: Oscar Salvador (SUSE) Cc: Vishal Verma Cc: Mike Rapoport Cc: Richard Cheng Cc: David Hildenbrand Cc: Georgi Djakov Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero

2026-06-27T10:06:50+00:00

commit b93062b6d8a1b2d9bad235cac25558a909819026 upstream. In qcom_geni_serial_handle_rx_dma(), geni_se_rx_dma_unprep() clears port->rx_dma_addr before SE_DMA_RX_LEN_IN is read. If the register is zero, for example when the RX stale counter fires on an idle line, the handler returns without calling geni_se_rx_dma_prep(). The next RX DMA interrupt then hits the !port->rx_dma_addr guard and returns immediately, so the RX DMA buffer is never rearmed and later input is lost. Keep the handler on the rearm path when rx_in is zero. Warn about the unexpected zero-length DMA completion, skip received-data handling, and always call geni_se_rx_dma_prep(). Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") Cc: stable@vger.kernel.org Reviewed-by: Bartosz Golaszewski Signed-off-by: Viken Dadhaniya Link: https://patch.msgid.link/20260528-serial-rx-0-byte-fix-v2-1-b4195cfe342f@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman

vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write

2026-06-27T10:06:49+00:00

commit a287620312dc6dcb9a093417a0e589bf30fcf38a upstream. A KASAN null-ptr-deref was observed in vcs_notifier(): BUG: KASAN: null-ptr-deref in vcs_notifier+0x98/0x130 Read of size 2 at addr qmp_cmd_name: qmp_capabilities, arguments: {} The issue is a race condition in vcs_write(). When the console_lock is temporarily dropped (to copy data from userspace), the vc_data pointer obtained from vcs_vc() may become stale. After re-acquiring the lock, vcs_vc() is called again to re-validate the pointer. If the vc has been deallocated in the meantime, vcs_vc() returns NULL, and the while loop breaks (with written > 0). However, after the loop, vcs_scr_updated(vc) is still called with the now-NULL vc pointer, leading to a null pointer dereference in the notifier chain (vcs_notifier dereferences param->vc). Fix this by adding a NULL check for vc before calling vcs_scr_updated(). Fixes: 8fb9ea65c9d1 ("vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF") Cc: stable@vger.kernel.org Signed-off-by: Yi Yang Reviewed-by: Jiri Slaby Link: https://patch.msgid.link/20260604060734.2914976-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman

crypto: qat - remove unused character device and IOCTLs

2026-06-27T10:06:49+00:00

commit d237230728c567297f2f98b425d63156ab2ed17f upstream. The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs for device configuration, start, stop, status query and enumeration. These IOCTLs are not part of any public uAPI header and have no known in-tree or out-of-tree users. Device lifecycle is already managed via sysfs. The ioctl interface also increases the attack surface and is the subject of a number of bug reports. Remove the character device, the IOCTL definitions, and the related data structures (adf_dev_status_info, adf_user_cfg_key_val, adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal module_init/module_exit hooks for workqueue, AER, and crypto/compression algorithm registration. Clean up leftover dead code that was only reachable from the removed IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(), adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(), adf_get_vf_real_id() and the unused ADF_CFG macros. Additionally, drop the entry associated to QAT IOCTLs in ioctl-number.rst. Cc: stable@vger.kernel.org Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework") Reported-by: Zhi Wang Reported-by: Bin Yu Reported-by: MingYu Wang Closes: https://lore.kernel.org/all/61d6d499.ab89.19b9b7f3186.Coremail.wangzhi_xd@stu.xidian.edu.cn/ Link: https://lore.kernel.org/all/20260508034841.256794-1-w15303746062@163.com/ Link: https://lore.kernel.org/all/20260508023542.256299-1-w15303746062@163.com/ Link: https://lore.kernel.org/all/20260504025120.98242-1-w15303746062@163.com/ Signed-off-by: Giovanni Cabiddu Reviewed-by: Ahsan Atta Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

iio: adc: ti-ads1298: add bounds check to pga_settings index

2026-06-27T10:06:49+00:00

commit 95e8a48d7a85d4226934020e57815a3316d3a14b upstream. ads1298_pga_settings has 7 elements but ADS1298_MASK_CH_PGA can yield values 0-7. If it yields a value >= 7, this causes an out-of-bounds array access. Add a bounds check and return -EINVAL if the index is out of range. Note that the remaining value b111 is reserved so should not be seen in a correctly functioning system. Assisted-by: gkh_clanker_2000 Cc: stable Cc: Jonathan Cameron Cc: David Lechner Cc: "Nuno Sá" Cc: Andy Shevchenko Signed-off-by: Sam Daly Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: light: veml6075: add bounds check to veml6075_it_ms index

2026-06-27T10:06:49+00:00

commit 307dc4240bd41852d9e0912921e298160db1c109 upstream. veml6075_it_ms has 5 elements but VEML6075_CONF_IT can yield values 0-7. If it returns a value >= 5, this causes an out-of-bounds array access. Add a bounds check and return -EINVAL if the index is out of range. The problem values are reserved so should never be read from the register. Hence this is hardening against fault device, missprogramming or bus corruption. Assisted-by: gkh_clanker_2000 Cc: stable Signed-off-by: Sam Daly Signed-off-by: Greg Kroah-Hartman Reviewed-by: Javier Carrasco Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

net: net_failover: Fix the deadlock in slave register

2026-06-27T10:06:49+00:00

commit b84c5632c7b31f8910167075a8128cfb9e50fcfe upstream. There is netdev_lock_ops() before the NETDEV_REGISTER notifier in register_netdevice(), so use the non-locking functions in net_failover_slave_register(). failover_slave_register() in failover_existing_slave_register() adds lock and unlock ops too. Call Trace: __schedule+0x30d/0x7a0 schedule+0x27/0x90 schedule_preempt_disabled+0x15/0x30 __mutex_lock.constprop.0+0x538/0x9e0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3b/0x50 dev_set_mtu+0x40/0xe0 net_failover_slave_register+0x24/0x280 failover_slave_register+0x103/0x1b0 failover_event+0x15e/0x210 ? dropmon_net_event+0xac/0xe0 notifier_call_chain+0x5e/0xe0 raw_notifier_call_chain+0x16/0x30 call_netdevice_notifiers_info+0x52/0xa0 register_netdevice+0x5f4/0x7c0 register_netdev+0x1e/0x40 _mlx5e_probe+0xe2/0x370 [mlx5_core] mlx5e_probe+0x59/0x70 [mlx5_core] ? __pfx_mlx5e_probe+0x10/0x10 [mlx5_core] Fixes: 4c975fd70002 ("net: hold instance lock during NETDEV_REGISTER/UP") Signed-off-by: Faicker Mo Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

firmware: samsung: acpm: Fix cross-thread RX length corruption

2026-06-27T10:06:48+00:00

[ Upstream commit f133bd4b5daf71bccdde0ad1a4f47fac76a6bfb1 ] Sashiko identified a cross-thread RX length corruption bug when reviewing the thermal addition to ACPM [1]. When multiple threads concurrently send IPC requests, the ACPM polling mechanism can encounter responses belonging to other threads. To drain the queue, the driver saves these concurrent responses into an internal cache (`rx_data->cmd`) to be retrieved later by the owning thread. Previously, the driver incorrectly used `xfer->rxcnt` (the expected receive length of the *current* polling thread) when copying data for *other* threads into this cache. If the threads expected responses of different lengths, this resulted in buffer underflows (leading to reads of uninitialized memory) or potential buffer overflows. Fix this by replacing the boolean `response` flag in `struct acpm_rx_data` with `rxcnt`, caching the exact expected receive length for each specific transaction during transfer preparation. Use this cached length when saving concurrent responses. Consequently, ensure that `xfer->rxcnt` is explicitly zeroed in driver helpers (e.g., `acpm_dvfs_set_xfer`) for fire-and-forget messages to prevent uninitialized stack garbage from being interpreted as a massive expected receive length. Cc: stable@vger.kernel.org Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver") Closes: https://sashiko.dev/#/patchset/20260420-acpm-tmu-v3-0-3dc8e93f0b26%40linaro.org [1] Reported-by: Titouan Ameline de Cadeville Closes: https://lore.kernel.org/r/20260426210255.73674-1-titouan.ameline@gmail.com/ Signed-off-by: Tudor Ambarus Link: https://patch.msgid.link/20260505-acpm-fixes-sashiko-reports-v5-1-43b5ee7f1674@linaro.org Signed-off-by: Krzysztof Kozlowski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Drivers: hv: vmbus: Improve the logic of reserving fb_mmio on Gen2 VMs

2026-06-27T10:06:48+00:00

[ Upstream commit 016a25e4b0df4d77e7c258edee4aaf982e4ee809 ] If vmbus_reserve_fb() in the kdump/kexec kernel fails to properly reserve the framebuffer MMIO range (which is below 4GB) due to a Gen2 VM's screen.lfb_base being zero [1], there is an MMIO conflict between the drivers hyperv-drm and pci-hyperv: when the driver pci-hyperv's hv_allocate_config_window() calls vmbus_allocate_mmio() to get an MMIO range, typically it gets a 32-bit MMIO range that overlaps with the framebuffer MMIO range, and later hv_pci_enter_d0() fails with an error message "PCI Pass-through VSP failed D0 Entry with status" since the host thinks that PCI devices must not use MMIO space that the host has assigned to the framebuffer. This is especially an issue if pci-hyperv is built-in and hyperv-drm is built as a module. Consequently, the kdump/kexec kernel fails to detect PCI devices via pci-hyperv, and may fail to mount the root file system, which may reside in a NVMe disk. The issue described here has existed for SR-IOV VF NICs since day one of the pci-hyperv driver, and has been worked around on x64 when possible. With the recent introduction of ARM64 VMs that boot from NVMe, there is no workaround, so we need a formal fix. On Gen2 VMs, if the screen.lfb_base is 0 in the kdump/kexec kernel [1], fall back to the low MMIO base, which should be equal to the framebuffer MMIO base [2] (the statement is true according to my testing on x64 Windows Server 2016, and on x64 and ARM64 Windows Server 2025 and on Azure. I checked with the Hyper-V team and they said the statement should continue to be true for Gen2 VMs). In the first kernel, screen.lfb_base is not 0; if the user specifies a very high resolution, it's not enough to only reserve 8MB: let's always reserve half of the space below 4GB, but cap the reservation to 128MB, which is the required framebuffer size of the highest resolution 7680*4320 supported by Hyper-V. While at it, fix the comparison "end > VTPM_BASE_ADDRESS" by changing the > to >=. Here the 'end' is an inclusive end (typically, it's 0xFFFF_FFFF for the low MMIO range). Note: vmbus_reserve_fb() now also reserves an MMIO range at the beginning of the low MMIO range on CVMs, which have no framebuffers (the 'screen.lfb_base' in vmbus_reserve_fb() is 0 for CVMs), just in case the host might treat the beginning of the low MMIO range specially [3]. BTW, the OpenHCL kernel is not affected by the change, because that kernel boots with DeviceTree rather than ACPI (so vmbus_reserve_fb() won't run there), and there is no framebuffer device for that kernel. Note: normally Gen1 VMs don't have the MMIO conflict issue because the framebuffer MMIO range (which is hardcoded to base=4GB-128MB and size=64MB for Gen1 VMs by the host) is always reported via the legacy PCI graphics device's BAR, so the kdump/kexec kernel can reserve the 64MB MMIO range; however, if the VM is configured to use a very high resolution and the required framebuffer size exceeds 64MB (AFAIK, in practice, this isn't a typical configuration by users), the hyperv-drm driver may need to allocate an MMIO range above 4GB and change the framebuffer MMIO location to the allocated MMIO range -- in this case, there can still be issues [4] which can't be easily fixed: any possible affected Gen1 users would have to use a resolution whose framebuffer size is <= 64MB, or switch to Gen2 VMs. [1] https://lore.kernel.org/all/SA1PR21MB692176C1BC53BFC9EAE5CF8EBF51A@SA1PR21MB6921.namprd21.prod.outlook.com/ [2] https://lore.kernel.org/all/SA1PR21MB69218F955B62DFF62E3E88D2BF222@SA1PR21MB6921.namprd21.prod.outlook.com/ [3] https://lore.kernel.org/all/SN6PR02MB415726B17D5A6027CD1717E8D4342@SN6PR02MB4157.namprd02.prod.outlook.com/ [4] https://lore.kernel.org/all/SA1PR21MB69213486F821CA5A2C793C81BF342@SA1PR21MB6921.namprd21.prod.outlook.com/ Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") CC: stable@vger.kernel.org Reviewed-by: Michael Kelley Tested-by: Krister Johansen Tested-by: Matthew Ruffell Signed-off-by: Dexuan Cui Signed-off-by: Wei Liu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman