kernel/linux.git/drivers, branch v6.12.74

USB: serial: option: add Telit FN920C04 RNDIS compositions

2026-02-19T15:29:56+00:00

commit 509f403f3ccec14188036212118651bf23599396 upstream. Add the following compositions: 0x10a1: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=d128dba9 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a6: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a6 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=d128dba9 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10ab: RNDIS + tty (AT) + tty (diag) + DPL (Data Packet Logging) + adb T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10ab Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=d128dba9 C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

iommu/arm-smmu-qcom: do not register driver in probe()

2026-02-19T15:29:56+00:00

commit ed1ac3c977dd6b119405fa36dd41f7151bd5b4de upstream. Commit 0b4eeee2876f ("iommu/arm-smmu-qcom: Register the TBU driver in qcom_smmu_impl_init") intended to also probe the TBU driver when CONFIG_ARM_SMMU_QCOM_DEBUG is disabled, but also moved the corresponding platform_driver_register() call into qcom_smmu_impl_init() which is called from arm_smmu_device_probe(). However, it neither makes sense to register drivers from probe() callbacks of other drivers, nor does the driver core allow registering drivers with a device lock already being held. The latter was revealed by commit dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()") leading to a deadlock condition described in [1]. Additionally, it was noted by Robin that the current approach is potentially racy with async probe [2]. Hence, fix this by registering the qcom_smmu_tbu_driver from module_init(). Unfortunately, due to the vendoring of the driver, this requires an indirection through arm-smmu-impl.c. Reported-by: Mark Brown Closes: https://lore.kernel.org/lkml/7ae38e31-ef31-43ad-9106-7c76ea0e8596@sirena.org.uk/ Link: https://lore.kernel.org/lkml/DFU7CEPUSG9A.1KKGVW4HIPMSH@kernel.org/ [1] Link: https://lore.kernel.org/lkml/0c0d3707-9ea5-44f9-88a1-a65c62e3df8d@arm.com/ [2] Fixes: dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()") Fixes: 0b4eeee2876f ("iommu/arm-smmu-qcom: Register the TBU driver in qcom_smmu_impl_init") Acked-by: Robin Murphy Tested-by: Bjorn Andersson Reviewed-by: Bjorn Andersson Acked-by: Konrad Dybcio Reviewed-by: Greg Kroah-Hartman Tested-by: Ioana Ciornei #LX2160ARDB Tested-by: Wang Jiayue Reviewed-by: Wang Jiayue Tested-by: Mark Brown Acked-by: Joerg Roedel Link: https://patch.msgid.link/20260121141215.29658-1-dakr@kernel.org Signed-off-by: Danilo Krummrich Signed-off-by: Greg Kroah-Hartman

fbdev: smscufx: properly copy ioctl memory to kernelspace

2026-02-19T15:29:55+00:00

commit 120adae7b42faa641179270c067864544a50ab69 upstream. The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from userspace to kernelspace, and instead directly references the memory, which can cause problems if invalid data is passed from userspace. Fix this all up by correctly copying the memory before accessing it within the kernel. Reported-by: Tianchu Chen Cc: stable Cc: Steve Glendinning Cc: Helge Deller Signed-off-by: Greg Kroah-Hartman Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

fbdev: rivafb: fix divide error in nv3_arb()

2026-02-19T15:29:55+00:00

commit 0209e21e3c372fa2da04c39214bec0b64e4eb5f4 upstream. A userspace program can trigger the RIVA NV3 arbitration code by calling the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz (derived from the PRAMDAC MCLK PLL) as a divisor without validating it first. In a normal setup, state->mclk_khz is provided by the real hardware and is non-zero. However, an attacker can construct a malicious or misconfigured device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL configuration, causing state->mclk_khz to become zero. Once nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns calculation causes a divide error and crashes the kernel. Fix this by checking whether state->mclk_khz is zero and bailing out before doing the division. The following log reveals it: rivafb: setting virtual Y resolution to 2184 divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline] RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546 Call Trace: nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603 nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline] CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246 riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779 rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196 fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188 __x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

Revert "wireguard: device: enable threaded NAPI"

2026-02-19T15:29:55+00:00

This reverts commit 933466fc50a8e4eb167acbd0d8ec96a078462e9c which is commit db9ae3b6b43c79b1ba87eea849fd65efa05b4b2e upstream. We have had three independent production user reports in combination with Cilium utilizing WireGuard as encryption underneath that k8s Pod E/W traffic to certain peer nodes fully stalled. The situation appears as follows: - Occurs very rarely but at random times under heavy networking load. - Once the issue triggers the decryption side stops working completely for that WireGuard peer, other peers keep working fine. The stall happens also for newly initiated connections towards that particular WireGuard peer. - Only the decryption side is affected, never the encryption side. - Once it triggers, it never recovers and remains in this state, the CPU/mem on that node looks normal, no leak, busy loop or crash. - bpftrace on the affected system shows that wg_prev_queue_enqueue fails, thus the MAX_QUEUED_PACKETS (1024 skbs!) for the peer's rx_queue is reached. - Also, bpftrace shows that wg_packet_rx_poll for that peer is never called again after reaching this state for that peer. For other peers wg_packet_rx_poll does get called normally. - Commit db9ae3b ("wireguard: device: enable threaded NAPI") switched WireGuard to threaded NAPI by default. The default has not been changed for triggering the issue, neither did CPU hotplugging occur (i.e. 5bd8de2 ("wireguard: queueing: always return valid online CPU in wg_cpumask_choose_online()")). - The issue has been observed with stable kernels of v5.15 as well as v6.1. It was reported to us that v5.10 stable is working fine, and no report on v6.6 stable either (somewhat related discussion in [0] though). - In the WireGuard driver the only material difference between v5.10 stable and v5.15 stable is the switch to threaded NAPI by default. [0] https://lore.kernel.org/netdev/CA+wXwBTT74RErDGAnj98PqS=wvdh8eM1pi4q6tTdExtjnokKqA@mail.gmail.com/ Breakdown of the problem: 1) skbs arriving for decryption are enqueued to the peer->rx_queue in wg_packet_consume_data via wg_queue_enqueue_per_device_and_peer. 2) The latter only moves the skb into the MPSC peer queue if it does not surpass MAX_QUEUED_PACKETS (1024) which is kept track in an atomic counter via wg_prev_queue_enqueue. 3) In case enqueueing was successful, the skb is also queued up in the device queue, round-robin picks a next online CPU, and schedules the decryption worker. 4) The wg_packet_decrypt_worker, once scheduled, picks these up from the queue, decrypts the packets and once done calls into wg_queue_enqueue_per_peer_rx. 5) The latter updates the state to PACKET_STATE_CRYPTED on success and calls napi_schedule on the per peer->napi instance. 6) NAPI then polls via wg_packet_rx_poll. wg_prev_queue_peek checks on the peer->rx_queue. It will wg_prev_queue_dequeue if the queue->peeked skb was not cached yet, or just return the latter otherwise. (wg_prev_queue_drop_peeked later clears the cache.) 7) From an ordering perspective, the peer->rx_queue has skbs in order while the device queue with the per-CPU worker threads from a global ordering PoV can finish the decryption and signal the skb PACKET_STATE_CRYPTED out of order. 8) A situation can be observed that the first packet coming in will be stuck waiting for the decryption worker to be scheduled for a longer time when the system is under pressure. 9) While this is the case, the other CPUs in the meantime finish decryption and call into napi_schedule. 10) Now in wg_packet_rx_poll it picks up the first in-order skb from the peer->rx_queue and sees that its state is still PACKET_STATE_UNCRYPTED. The NAPI poll routine then exits early with work_done = 0 and calls napi_complete_done, signalling it "finished" processing. 11) The assumption in wg_packet_decrypt_worker is that when the decryption finished the subsequent napi_schedule will always lead to a later invocation of wg_packet_rx_poll to pick up the finished packet. 12) However, it appears that a later napi_schedule does /not/ schedule a later poll and thus no wg_packet_rx_poll. 13) If this situation happens exactly for the corner case where the decryption worker of the first packet is stuck and waiting to be scheduled, and the network load for WireGuard is very high then the queue can build up to MAX_QUEUED_PACKETS. 14) If this situation occurs, then no new decryption worker will be scheduled and also no new napi_schedule to make forward progress. 15) This means the peer->rx_queue stops processing packets completely and they are indefinitely stuck waiting for a new NAPI poll on that peer which never happens. New packets for that peer are then dropped due to full queue, as it has been observed on the production machines. Technically, the backport of commit db9ae3b6b43c ("wireguard: device: enable threaded NAPI") to stable should not have happened since it is more of an optimization rather than a pure fix and addresses a NAPI situation with utilizing many WireGuard tunnel devices in parallel. Revert it from stable given the backport triggers a regression for mentioned kernels. Signed-off-by: Daniel Borkmann Acked-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

gpiolib: acpi: Fix gpio count with string references

2026-02-19T15:29:54+00:00

[ Upstream commit c62e0658d458d8f100445445c3ddb106f3824a45 ] Since commit 9880702d123f2 ("ACPI: property: Support using strings in reference properties") it is possible to use strings instead of local references. This work fine with single GPIO but not with arrays as acpi_gpio_package_count() didn't handle this case. Update it to handle strings like local references to cover this case as well. Signed-off-by: Alban Bedel Reviewed-by: Mika Westerberg Link: https://patch.msgid.link/20260129145944.3372777-1-alban.bedel@lht.dlh.de Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

drm/amd/display: remove assert around dpp_base replacement

2026-02-19T15:29:54+00:00

[ Upstream commit 84962445cd8a83dc5bed4c8ad5bbb2c1cdb249a0 ] There is nothing wrong if in_shaper_func type is DISTRIBUTED POINTS. Remove the assert placed for a TODO to avoid misinterpretations. Signed-off-by: Melissa Wen Reviewed-by: Alex Hung Signed-off-by: Alex Deucher (cherry picked from commit 1714dcc4c2c53e41190896eba263ed6328bcf415) Signed-off-by: Sasha Levin

drm/amd/display: extend delta clamping logic to CM3 LUT helper

2026-02-19T15:29:54+00:00

[ Upstream commit d25b32aa829a3ed5570138e541a71fb7805faec3 ] Commit 27fc10d1095f ("drm/amd/display: Fix the delta clamping for shaper LUT") fixed banding when using plane shaper LUT in DCN10 CM helper. The problem is also present in DCN30 CM helper, fix banding by extending the same bug delta clamping fix to CM3. Signed-off-by: Melissa Wen Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher (cherry picked from commit 0274a54897f356f9c78767c4a2a5863f7dde90c6) Signed-off-by: Sasha Levin

platform/x86: panasonic-laptop: Fix sysfs group leak in error path

2026-02-19T15:29:53+00:00

[ Upstream commit 43b0b7eff4b3fb684f257d5a24376782e9663465 ] The acpi_pcc_hotkey_add() error path leaks sysfs group pcc_attr_group if platform_device_register_simple() fails for the "panasonic" platform device. Address this by making it call sysfs_remove_group() in that case for the group in question. Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/3398370.44csPzL39Z@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin

platform/x86/amd/pmc: Add quirk for MECHREVO Wujie 15X Pro

2026-02-19T15:29:53+00:00

[ Upstream commit 2b4e00d8e70ca8736fda82447be6a4e323c6d1f5 ] The MECHREVO Wujie 15X Pro suffers from spurious IRQ issues related to the AMD PMC. Add it to the quirk list to use the spurious_8042 fix. Signed-off-by: gongqi <550230171hxy@gmail.com> Link: https://patch.msgid.link/20260122155501.376199-4-550230171hxy@gmail.com Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin