kernel/linux.git/drivers, branch v6.1.176

media: rc: igorplugusb: fix control request setup packet

2026-06-19T11:37:33+00:00

commit 171022c7d594c133a45f92357a2a91475edabe20 upstream. Commit eac69475b01f ("media: rc: igorplugusb: heed coherency rules") changed the control request storage from an embedded struct to an allocated pointer so it can obey DMA coherency rules. However, the driver still passes &ir->request to usb_fill_control_urb(). That points the URB setup packet at the pointer field itself rather than at the allocated struct usb_ctrlrequest. USB core then interprets pointer bytes as the setup packet. This can produce an invalid bRequestType and trigger the control direction warning reported by syzbot: usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0 Pass ir->request itself as the setup packet. Fixes: eac69475b01f ("media: rc: igorplugusb: heed coherency rules") Reported-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=11f0e4f957c7c3bf3d51 Tested-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Assisted-by: Codex:GPT-5.5 Signed-off-by: Henri A Signed-off-by: Sean Young Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman

media: rc: ttusbir: fix inverted error logic

2026-06-19T11:37:33+00:00

commit 646ebdd3105809d84ed04aa9e92e47e89cc44502 upstream. We have to report ENOMEM if no buffer is allocated. Typo dropped a "!". Restore it. Fixes: 50acaad3d202 ("media: rc: ttusbir: respect DMA coherency rules") Cc: stable@vger.kernel.org Signed-off-by: Oliver Neukum Signed-off-by: Sean Young Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman

r8152: Hold the rtnl_lock for all of reset

2026-06-19T11:37:32+00:00

commit e62adaeecdc6a1e8ae86e7f3f9f8223a3ede94f5 upstream. As of commit d9962b0d4202 ("r8152: Block future register access if register access fails") there is a race condition that can happen between the USB device reset thread and napi_enable() (not) getting called during rtl8152_open(). Specifically: * While rtl8152_open() is running we get a register access error that's _not_ -ENODEV and queue up a USB reset. * rtl8152_open() exits before calling napi_enable() due to any reason (including usb_submit_urb() returning an error). In that case: * Since the USB reset is perform in a separate thread asynchronously, it can run at anytime USB device lock is not held - even before rtl8152_open() has exited with an error and caused __dev_open() to clear the __LINK_STATE_START bit. * The rtl8152_pre_reset() will notice that the netif_running() returns true (since __LINK_STATE_START wasn't cleared) so it won't exit early. * rtl8152_pre_reset() will then hang in napi_disable() because napi_enable() was never called. We can fix the race by making sure that the r8152 reset routines don't run at the same time as we're opening the device. Specifically we need the reset routines in their entirety rely on the return value of netif_running(). The only way to reliably depend on that is for them to hold the rntl_lock() mutex for the duration of reset. Grabbing the rntl_lock() mutex for the duration of reset seems like a long time, but reset is not expected to be common and the rtnl_lock() mutex is already held for long durations since the core grabs it around the open/close calls. Fixes: d9962b0d4202 ("r8152: Block future register access if register access fails") Reviewed-by: Grant Grundler Signed-off-by: Douglas Anderson Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

fbdev: vt8500lcdfb: Fix dma_free_coherent() cpu_addr parameter

2026-06-19T11:37:32+00:00

Before commit 63a11adaceb8 "fbdev/vt8500lcdfb: Initialize fb_ops with fbdev macros", the virtual address of the screen buffer was stored in the fb_info::screen_base field and not fb_info::screen_buffer. The backport of commit 88b3b9924337 ("fbdev: vt8500lcdfb: fix missing dma_free_coherent()") did not take that into account. Change the cpu_addr parameter to dma_free_coherent() accordingly. Fixes: 778f31be5b8c ("fbdev: vt8500lcdfb: fix missing dma_free_coherent()") Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

drm/v3d: Reject empty multisync extension to prevent infinite loop

2026-06-19T11:37:32+00:00

commit fb44d589bf3148e13452185a6e772a7efbf2d684 upstream. v3d_get_extensions() walks a userspace-provided singly-linked list of ioctl extensions without any bound on the chain length. A local user can craft a self-referential extension (ext->next == &ext) with zero in_sync_count and out_sync_count, which bypasses the existing duplicate- extension guard: if (se->in_sync_count || se->out_sync_count) return -EINVAL; The guard never fires because v3d_get_multisync_post_deps() returns immediately when count is zero, leaving both fields at zero on every iteration. The result is an infinite loop in kernel context, blocking the calling thread and pegging a CPU core indefinitely. Fix this by rejecting a multisync extension where both in_sync_count and out_sync_count are zero in v3d_get_multisync_submit_deps(). An empty multisync carries no synchronization information and serves no useful purpose, so returning -EINVAL for such an extension is the correct defense against this attack vector. Fixes: e4165ae8304e ("drm/v3d: add multiple syncobjs support") Cc: stable@vger.kernel.org Signed-off-by: Ashutosh Desai Link: https://patch.msgid.link/20260415050000.3816128-1-ashutoshdesai993@gmail.com Signed-off-by: Maíra Canal Signed-off-by: Greg Kroah-Hartman

ipmi:ssif: NULL thread on error

2026-06-19T11:37:31+00:00

commit a8aebe93a4938c0ca1941eeaae821738f869be3d upstream. Cleanup code was checking the thread for NULL, but it was possibly a PTR_ERR() in one spot. Spotted with static analysis. Link: https://sourceforge.net/p/openipmi/mailman/message/59324676/ Fixes: 75c486cb1bca ("ipmi:ssif: Clean up kthread on errors") Cc: # 91eb7ec72612: ipmi:ssif: Remove unnecessary indention Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard Signed-off-by: Greg Kroah-Hartman

ipmi:ssif: Remove unnecessary indention

2026-06-19T11:37:31+00:00

commit 91eb7ec7261254b6875909df767185838598e21e upstream. A section was in {} that didn't need to be, move the variable definition to the top and set th eindentino properly. Signed-off-by: Corey Minyard Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: reset internal port states on soft reset AMS

2026-06-19T11:37:31+00:00

commit 2909f0d4994fb4306bf116df5ccee797791fce2c upstream. Reset internal port states (such as vdm_sm_running and explicit_contract) on soft reset AMS as the port needs to negotiate a new contract. The consequence of leaving the states in as-is cond are as follows: * port is in SRC power role and an explicit contract is negotiated with the port partner (in sink role) * port partner sends a Soft Reset AMS while VDM State Machine is running * port accepts the Soft Reset request and the port advertises src caps * port partner sends a Request message but since the explicit_contract and vdm_sm_running are true from previous negotiation, the port ends up sending Soft Reset instead of Accept msg. Stub Log: [ 203.653942] AMS DISCOVER_IDENTITY start [ 203.653947] PD TX, header: 0x176f [ 203.655901] PD TX complete, status: 0 [ 203.657470] PD RX, header: 0x124f [1] [ 203.657477] Rx VDM cmd 0xff008081 type 2 cmd 1 len 1 [ 203.657482] AMS DISCOVER_IDENTITY finished [ 203.657484] cc:=4 [ 204.155698] PD RX, header: 0x144f [1] [ 204.155718] Rx VDM cmd 0xeeee8001 type 0 cmd 1 len 1 [ 204.155741] PD TX, header: 0x196f [ 204.157622] PD TX complete, status: 0 [ 204.160060] PD RX, header: 0x4d [1] [ 204.160066] state change SRC_READY -> SOFT_RESET [rev2 SOFT_RESET_AMS] [ 204.160076] PD TX, header: 0x163 [ 204.162486] PD TX complete, status: 0 [ 204.162832] AMS SOFT_RESET_AMS finished [ 204.162840] cc:=4 [ 204.162891] AMS POWER_NEGOTIATION start [ 204.162896] state change SOFT_RESET -> AMS_START [rev2 POWER_NEGOTIATION] [ 204.162908] state change AMS_START -> SRC_SEND_CAPABILITIES [rev2 POWER_NEGOTIATION] [ 204.162913] PD TX, header: 0x1361 [ 204.165529] PD TX complete, status: 0 [ 204.165571] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES_TIMEOUT @ 60 ms [rev2 POWER_NEGOTIATION] [ 204.166996] PD RX, header: 0x1242 [1] [ 204.167009] state change SRC_SEND_CAPABILITIES -> SRC_SOFT_RESET_WAIT_SNK_TX [rev2 POWER_NEGOTIATION] [ 204.167019] AMS POWER_NEGOTIATION finished [ 204.167020] cc:=4 [ 204.167083] AMS SOFT_RESET_AMS start [ 204.167086] state change SRC_SOFT_RESET_WAIT_SNK_TX -> SOFT_RESET_SEND [rev2 SOFT_RESET_AMS] [ 204.167092] PD TX, header: 0x16d [ 204.168824] PD TX complete, status: 0 [ 204.168854] pending state change SOFT_RESET_SEND -> HARD_RESET_SEND @ 60 ms [rev2 SOFT_RESET_AMS] [ 204.171876] PD RX, header: 0x43 [1] [ 204.171879] AMS SOFT_RESET_AMS finished This causes COMMON.PROC.PD.11.2 check failure for TEST.PD.VDM.SRC.2_Rev2Src test on the PD compliance tester. Signed-off-by: Amit Sunil Dhamne Fixes: 8d3a0578ad1a ("usb: typec: tcpm: Respond Wait if VDM state machine is running") Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable Reviewed-by: Badhri Jagan Sridharan Acked-by: Heikki Krogerus Link: https://patch.msgid.link/20260414-fix-soft-reset-v1-1-01d7cb9764e2@google.com Signed-off-by: Amit Sunil Dhamne Signed-off-by: Greg Kroah-Hartman

ipmi:ssif: Clean up kthread on errors

2026-06-19T11:37:31+00:00

commit 75c486cb1bcaa1a3ec3a6438498176a3a4998ae4 upstream. If an error occurs after the ssif kthread is created, but before the main IPMI code starts the ssif interface, the ssif kthread will not be stopped. So make sure the kthread is stopped on an error condition if it is running. Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF)") Reported-by: Li Xiao <<252270051@hdu.edu.cn> Cc: stable@vger.kernel.org Reviewed-by: Li Xiao <252270051@hdu.edu.cn> Signed-off-by: Corey Minyard Signed-off-by: Greg Kroah-Hartman

ipmi:ssif: Fix a shutdown race

2026-06-19T11:37:31+00:00

commit 6bd0eb6d759b9a22c5509ea04e19c2e8407ba418 upstream. It was possible for the SSIF thread to stop and quit before the kthread_stop() call because ssif->stopping was set before the stop. So only exit the SSIF thread is kthread_should_stop() returns true. There is no need to wake the thread, as the wait will be interrupted by kthread_stop(). Signed-off-by: Corey Minyard Signed-off-by: Greg Kroah-Hartman