kernel/linux.git/drivers, branch v5.8.18

phy: marvell: comphy: Convert internal SMCC firmware return codes to errno

2020-11-01T11:45:43+00:00

commit ea17a0f153af2cd890e4ce517130dcccaa428c13 upstream. Driver ->power_on and ->power_off callbacks leaks internal SMCC firmware return codes to phy caller. This patch converts SMCC error codes to standard linux errno codes. Include file linux/arm-smccc.h already provides defines for SMCC error codes, so use them instead of custom driver defines. Note that return value is signed 32bit, but stored in unsigned long type with zero padding. Tested-by: Tomasz Maciej Nowak Link: https://lore.kernel.org/r/20200902144344.16684-2-pali@kernel.org Signed-off-by: Pali Rohár Signed-off-by: Lorenzo Pieralisi Reviewed-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

misc: rtsx: do not setting OC_POWER_DOWN reg in rtsx_pci_init_ocp()

2020-11-01T11:45:43+00:00

commit 551b6729578a8981c46af964c10bf7d5d9ddca83 upstream. this power saving action in rtsx_pci_init_ocp() cause INTEL-NUC6 platform missing card reader Signed-off-by: Ricky Wu Link: https://lore.kernel.org/r/20200824030006.30033-1-ricky_wu@realtek.com Cc: Chris Clayton Signed-off-by: Greg Kroah-Hartman

xen/gntdev.c: Mark pages as dirty

2020-11-01T11:45:42+00:00

commit 779055842da5b2e508f3ccf9a8153cb1f704f566 upstream. There seems to be a bug in the original code when gntdev_get_page() is called with writeable=true then the page needs to be marked dirty before being put. To address this, a bool writeable is added in gnt_dev_copy_batch, set it in gntdev_grant_copy_seg() (and drop `writeable` argument to gntdev_get_page()) and then, based on batch->writeable, use set_page_dirty_lock(). Fixes: a4cdb556cae0 (xen/gntdev: add ioctl for grant copy) Suggested-by: Boris Ostrovsky Signed-off-by: Souptick Joarder Cc: John Hubbard Cc: Boris Ostrovsky Cc: Juergen Gross Cc: David Vrabel Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1599375114-32360-1-git-send-email-jrdr.linux@gmail.com Reviewed-by: Boris Ostrovsky Signed-off-by: Boris Ostrovsky Signed-off-by: Greg Kroah-Hartman

ata: sata_rcar: Fix DMA boundary mask

2020-11-01T11:45:42+00:00

commit df9c590986fdb6db9d5636d6cd93bc919c01b451 upstream. Before commit 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices"), the R-Car SATA device didn't have DMA parameters. Hence the DMA boundary mask supplied by its driver was silently ignored, as __scsi_init_queue() doesn't check the return value of dma_set_seg_boundary(), and the default value of 0xffffffff was used. Now the device has gained DMA parameters, the driver-supplied value is used, and the following warning is printed on Salvator-XS: DMA-API: sata_rcar ee300000.sata: mapping sg segment across boundary [start=0x00000000ffffe000] [end=0x00000000ffffefff] [boundary=0x000000001ffffffe] WARNING: CPU: 5 PID: 38 at kernel/dma/debug.c:1233 debug_dma_map_sg+0x298/0x300 (the range of start/end values depend on whether IOMMU support is enabled or not) The issue here is that SATA_RCAR_DMA_BOUNDARY doesn't have bit 0 set, so any typical end value, which is odd, will trigger the check. Fix this by increasing the DMA boundary value by 1. This also fixes the following WRITE DMA EXT timeout issue: # dd if=/dev/urandom of=/mnt/de1/file1-1024M bs=1M count=1024 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: failed command: WRITE DMA EXT ata1.00: cmd 35/00:00:00:e6:0c/00:0a:00:00:00/e0 tag 0 dma 1310720 out res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } as seen by Shimoda-san since commit 429120f3df2dba2b ("block: fix splitting segments on boundary masks"). Fixes: 8bfbeed58665dbbf ("sata_rcar: correct 'sata_rcar_sht'") Fixes: 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices") Fixes: 429120f3df2dba2b ("block: fix splitting segments on boundary masks") Signed-off-by: Geert Uytterhoeven Tested-by: Lad Prabhakar Tested-by: Yoshihiro Shimoda Reviewed-by: Christoph Hellwig Reviewed-by: Greg Kroah-Hartman Reviewed-by: Sergei Shtylyov Reviewed-by: Ulf Hansson Cc: stable Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt

2020-11-01T11:45:42+00:00

commit 534cf755d9df99e214ddbe26b91cd4d81d2603e2 upstream. Issuing a magic-sysrq via the PL011 causes the following lockdep splat, which is easily reproducible under QEMU: | sysrq: Changing Loglevel | sysrq: Loglevel set to 9 | | ====================================================== | WARNING: possible circular locking dependency detected | 5.9.0-rc7 #1 Not tainted | ------------------------------------------------------ | systemd-journal/138 is trying to acquire lock: | ffffab133ad950c0 (console_owner){-.-.}-{0:0}, at: console_lock_spinning_enable+0x34/0x70 | | but task is already holding lock: | ffff0001fd47b098 (&port_lock_key){-.-.}-{2:2}, at: pl011_int+0x40/0x488 | | which lock already depends on the new lock. [...] | Possible unsafe locking scenario: | | CPU0 CPU1 | ---- ---- | lock(&port_lock_key); | lock(console_owner); | lock(&port_lock_key); | lock(console_owner); | | *** DEADLOCK *** The issue being that CPU0 takes 'port_lock' on the irq path in pl011_int() before taking 'console_owner' on the printk() path, whereas CPU1 takes the two locks in the opposite order on the printk() path due to setting the "console_owner" prior to calling into into the actual console driver. Fix this in the same way as the msm-serial driver by dropping 'port_lock' before handling the sysrq. Cc: # 4.19+ Cc: Russell King Cc: Greg Kroah-Hartman Cc: Jiri Slaby Link: https://lore.kernel.org/r/20200811101313.GA6970@willie-the-truck Signed-off-by: Peter Zijlstra Tested-by: Will Deacon Signed-off-by: Will Deacon Link: https://lore.kernel.org/r/20200930120432.16551-1-will@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: qcom_geni_serial: To correct QUP Version detection logic

2020-11-01T11:45:42+00:00

commit c9ca43d42ed8d5fd635d327a664ed1d8579eb2af upstream. For QUP IP versions 2.5 and above the oversampling rate is halved from 32 to 16. Commit ce734600545f ("tty: serial: qcom_geni_serial: Update the oversampling rate") is pushed to handle this scenario. But the existing logic is failing to classify QUP Version 3.0 into the correct group ( 2.5 and above). As result Serial Engine clocks are not configured properly for baud rate and garbage data is sampled to FIFOs from the line. So, fix the logic to detect QUP with versions 2.5 and above. Fixes: ce734600545f ("tty: serial: qcom_geni_serial: Update the oversampling rate") Cc: stable Signed-off-by: Paras Sharma Reviewed-by: Akash Asthana Link: https://lore.kernel.org/r/1601445926-23673-1-git-send-email-parashar@codeaurora.org Signed-off-by: Greg Kroah-Hartman

drm/i915/gem: Serialise debugfs i915_gem_objects with ctx->mutex

2020-11-01T11:45:42+00:00

commit 4fe9af8e881d946bf60790eeb37a7c4f96e28382 upstream. Since the debugfs may peek into the GEM contexts as the corresponding client/fd is being closed, we may try and follow a dangling pointer. However, the context closure itself is serialised with the ctx->mutex, so if we hold that mutex as we inspect the state coupled in the context, we know the pointers within the context are stable and will remain valid as we inspect their tables. Signed-off-by: Chris Wilson Cc: CQ Tang Cc: Daniel Vetter Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20200723172119.17649-3-chris@chris-wilson.co.uk (cherry picked from commit 102f5aa491f262c818e607fc4fee08a724a76c69) Signed-off-by: Rodrigo Vivi Signed-off-by: Greg Kroah-Hartman

RDMA/addr: Fix race with netevent_callback()/rdma_addr_cancel()

2020-11-01T11:45:41+00:00

commit 2ee9bf346fbfd1dad0933b9eb3a4c2c0979b633e upstream. This three thread race can result in the work being run once the callback becomes NULL: CPU1 CPU2 CPU3 netevent_callback() process_one_req() rdma_addr_cancel() [..] spin_lock_bh() set_timeout() spin_unlock_bh() spin_lock_bh() list_del_init(&req->list); spin_unlock_bh() req->callback = NULL spin_lock_bh() if (!list_empty(&req->list)) // Skipped! // cancel_delayed_work(&req->work); spin_unlock_bh() process_one_req() // again req->callback() // BOOM cancel_delayed_work_sync() The solution is to always cancel the work once it is completed so any in between set_timeout() does not result in it running again. Cc: stable@vger.kernel.org Fixes: 44e75052bc2a ("RDMA/rdma_cm: Make rdma_addr_cancel into a fence") Link: https://lore.kernel.org/r/20200930072007.1009692-1-leon@kernel.org Reported-by: Dan Aloni Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman

cxl: Rework error message for incompatible slots

2020-11-01T11:45:41+00:00

commit 40ac790d99c6dd16b367d5c2339e446a5f1b0593 upstream. Improve the error message shown if a capi adapter is plugged on a capi-incompatible slot directly under the PHB (no intermediate switch). Fixes: 5632874311db ("cxl: Add support for POWER9 DD2") Cc: stable@vger.kernel.org # 4.14+ Signed-off-by: Frederic Barrat Reviewed-by: Andrew Donnellan Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200407115601.25453-1-fbarrat@linux.ibm.com Signed-off-by: Greg Kroah-Hartman

p54: avoid accessing the data mapped to streaming DMA

2020-11-01T11:45:41+00:00

commit 478762855b5ae9f68fa6ead1edf7abada70fcd5f upstream. In p54p_tx(), skb->data is mapped to streaming DMA on line 337: mapping = pci_map_single(..., skb->data, ...); Then skb->data is accessed on line 349: desc->device_addr = ((struct p54_hdr *)skb->data)->req_id; This access may cause data inconsistency between CPU cache and hardware. To fix this problem, ((struct p54_hdr *)skb->data)->req_id is stored in a local variable before DMA mapping, and then the driver accesses this local variable instead of skb->data. Cc: Signed-off-by: Jia-Ju Bai Acked-by: Christian Lamparter Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200802132949.26788-1-baijiaju@tsinghua.edu.cn Signed-off-by: Greg Kroah-Hartman