kernel/linux.git/drivers, branch v5.4.269

of: gpio unittest kfree() wrong object

2024-02-23T07:25:15+00:00

commit fb227f597d612c6660888d1947e68a25fed7b9cc upstream. kernel test robot reported "WARNING: held lock freed!" triggered by unittest_gpio_remove(). unittest_gpio_remove() was unexpectedly called due to an error in overlay tracking. The remove had not been tested because the gpio overlay removal tests have not been implemented. kfree() gdev instead of pdev. Fixes: f4056e705b2e ("of: unittest: add overlay gpio test to catch gpio hog problem") Reported-by: kernel test robot Signed-off-by: Frank Rowand Reviewed-by: Geert Uytterhoeven Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

of: unittest: fix EXPECT text for gpio hog errors

2024-02-23T07:25:15+00:00

commit e85860e5bc077865a04f0a88d0b0335d3200484a upstream. The console message text for gpio hog errors does not match what unittest expects. Fixes: f4056e705b2ef ("of: unittest: add overlay gpio test to catch gpio hog problem") Signed-off-by: Frank Rowand Link: https://lore.kernel.org/r/20211029013225.2048695-1-frowand.list@gmail.com Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

net: bcmgenet: Fix EEE implementation

2024-02-23T07:25:15+00:00

commit a9f31047baca57d47440c879cf259b86f900260c upstream. We had a number of short comings: - EEE must be re-evaluated whenever the state machine detects a link change as wight be switching from a link partner with EEE enabled/disabled - tx_lpi_enabled controls whether EEE should be enabled/disabled for the transmit path, which applies to the TBUF block - We do not need to forcibly enable EEE upon system resume, as the PHY state machine will trigger a link event that will do that, too Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support") Signed-off-by: Florian Fainelli Reviewed-by: Russell King (Oracle) Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

Revert "Revert "mtd: rawnand: gpmi: Fix setting busy timeout setting""

2024-02-23T07:25:15+00:00

This reverts commit 15a3adfe75937c9e4e0e48f0ed40dd39a0e526e2. The backport of [1] relies on having [2] also backported. Having only one of the two results in a bogus hw->timing1 setting. If only [2] is backportet the 16 bit register value likely underflows resulting in a busy_wait_timeout of 0. Or if only [1] is applied the value likely overflows with chances of having last 16 LSBs all 0 which would then result in a busy_wait_timeout of 0 too. Both cases may lead to NAND data corruption, e.g. on a Colibri iMX7 setup this has been seen. [1] commit 0fddf9ad06fd ("mtd: rawnand: gpmi: Set WAIT_FOR_READY timeout based on program/erase times") [2] commit 06781a5026350 ("mtd: rawnand: gpmi: Fix setting busy timeout setting") Signed-off-by: Max Krummenacher Signed-off-by: Greg Kroah-Hartman

drm/msm/dsi: Enable runtime PM

2024-02-23T07:25:14+00:00

[ Upstream commit 6ab502bc1cf3147ea1d8540d04b83a7a4cb6d1f1 ] Some devices power the DSI PHY/PLL through a power rail that we model as a GENPD. Enable runtime PM to make it suspendable. Signed-off-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/543352/ Link: https://lore.kernel.org/r/20230620-topic-dsiphy_rpm-v2-2-a11a751f34f0@linaro.org Signed-off-by: Dmitry Baryshkov Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks") Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()

2024-02-23T07:25:14+00:00

[ Upstream commit b4060db9251f919506e4d672737c6b8ab9a84701 ] The PM Runtime docs say: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. >From grepping code, it's clear that many people aren't aware of the need to call pm_runtime_dont_use_autosuspend(). When brainstorming solutions, one idea that came up was to leverage the new-ish devm_pm_runtime_enable() function. The idea here is that: * When the devm action is called we know that the driver is being removed. It's the perfect time to undo the use_autosuspend. * The code of pm_runtime_dont_use_autosuspend() already handles the case of being called when autosuspend wasn't enabled. Suggested-by: Laurent Pinchart Signed-off-by: Douglas Anderson Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks") Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

PM: runtime: add devm_pm_runtime_enable helper

2024-02-23T07:25:14+00:00

[ Upstream commit b3636a3a2c51715736d3ec45f635ed03191962ce ] A typical code pattern for pm_runtime_enable() call is to call it in the _probe function and to call pm_runtime_disable() both from _probe error path and from _remove function. For some drivers the whole remove function would consist of the call to pm_remove_disable(). Add helper function to replace this bolierplate piece of code. Calling devm_pm_runtime_enable() removes the need for calling pm_runtime_disable() both in the probe()'s error path and in the remove() function. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20210731195034.979084-2-dmitry.baryshkov@linaro.org Acked-by: Rafael J. Wysocki Signed-off-by: Stephen Boyd Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks") Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

bus: moxtet: Add spi device table

2024-02-23T07:25:13+00:00

[ Upstream commit aaafe88d5500ba18b33be72458439367ef878788 ] The moxtet module fails to auto-load on. Add a SPI id table to allow it to do so. Signed-off-by: Sjoerd Simons Cc: Reviewed-by: Marek Behún Signed-off-by: Gregory CLEMENT Signed-off-by: Sasha Levin

Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"

2024-02-23T07:25:13+00:00

[ Upstream commit bed9e27baf52a09b7ba2a3714f1e24e17ced386d ] This reverts commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74. That commit introduced the following race and can cause system hung. md_write_start: raid5d: // mddev->in_sync == 1 set "MD_SB_CHANGE_PENDING" // running before md_write_start wakeup it waiting "MD_SB_CHANGE_PENDING" cleared >>>>>>>>> hung wakeup mddev->thread ... waiting "MD_SB_CHANGE_PENDING" cleared >>>> hung, raid5d should clear this flag but get hung by same flag. The issue reverted commit fixing is fixed by last patch in a new way. Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d") Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Junxiao Bi Reviewed-by: Yu Kuai Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20231108182216.73611-2-junxiao.bi@oracle.com Signed-off-by: Sasha Levin

pmdomain: core: Move the unused cleanup to a _sync initcall

2024-02-23T07:25:13+00:00

commit 741ba0134fa7822fcf4e4a0a537a5c4cfd706b20 upstream. The unused clock cleanup uses the _sync initcall to give all users at earlier initcalls time to probe. Do the same to avoid leaving some PDs dangling at "on" (which actually happened on qcom!). Fixes: 2fe71dcdfd10 ("PM / domains: Add late_initcall to disable unused PM domains") Signed-off-by: Konrad Dybcio Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231227-topic-pmdomain_sync_cleanup-v1-1-5f36769d538b@linaro.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman