kernel/linux.git/drivers, branch v5.4.230

drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix

2023-01-24T06:18:01+00:00

commit 973a9c810c785ac270a6d50d8cf862b0c1643a10 upstream. The YCC conversion matrix for RGB -> COLOR_SPACE_YCBCR2020_TYPE is missing the values for the fourth column of the matrix. The fourth column of the matrix is essentially just a value that is added given that the color is 3 components in size. These values are needed to bias the chroma from the [-1, 1] -> [0, 1] range. This fixes color being very green when using Gamescope HDR on HDMI output which prefers YCC 4:4:4. Fixes: 40df2f809e8f ("drm/amd/display: color space ycbcr709 support") Reviewed-by: Melissa Wen Signed-off-by: Joshua Ashton Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Fix set scaling doesn's work

2023-01-24T06:18:01+00:00

commit 040625ab82ce6dca7772cb3867fe5c9eb279a344 upstream. [Why] Setting scaling does not correctly update CRTC state. As a result dc stream state's src (composition area) && dest (addressable area) was not calculated as expected. This causes set scaling doesn's work. [How] Correctly update CRTC state when setting scaling property. Reviewed-by: Harry Wentland Tested-by: Rodrigo Siqueira Signed-off-by: hongao Signed-off-by: Rodrigo Siqueira Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/i915: re-disable RC6p on Sandy Bridge

2023-01-24T06:18:01+00:00

commit 67b0b4ed259e425b7eed09da75b42c80682ca003 upstream. RC6p on Sandy Bridge got re-enabled over time, causing visual glitches and GPU hangs. Disabled originally in commit 1c8ecf80fdee ("drm/i915: do not enable RC6p on Sandy Bridge"). Signed-off-by: Sasa Dragic Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20221219172927.9603-2-sasa.dragic@gmail.com Fixes: fb6db0f5bf1d ("drm/i915: Remove unsafe i915.enable_rc6") Fixes: 13c5a577b342 ("drm/i915/gt: Select the deepest available parking mode for rc6") Cc: stable@vger.kernel.org Reviewed-by: Rodrigo Vivi (cherry picked from commit 0c8a6e9ea232c221976a0670256bd861408d9917) Signed-off-by: Rodrigo Vivi Signed-off-by: Greg Kroah-Hartman

gsmi: fix null-deref in gsmi_get_variable

2023-01-24T06:18:01+00:00

commit a769b05eeed7accc4019a1ed9799dd72067f1ce8 upstream. We can get EFI variables without fetching the attribute, so we must allow for that in gsmi. commit 859748255b43 ("efi: pstore: Omit efivars caching EFI varstore access layer") added a new get_variable call with attr=NULL, which triggers panic in gsmi. Fixes: 74c5b31c6618 ("driver: Google EFI SMI") Cc: stable Signed-off-by: Khazhismel Kumykov Link: https://lore.kernel.org/r/20230118010212.1268474-1-khazhy@google.com Signed-off-by: Greg Kroah-Hartman

serial: atmel: fix incorrect baudrate setup

2023-01-24T06:18:01+00:00

commit 5bfdd3c654bd879bff50c2e85e42f85ae698b42f upstream. Commit ba47f97a18f2 ("serial: core: remove baud_rates when serial console setup") changed uart_set_options to select the correct baudrate configuration based on the absolute error between requested baudrate and available standard baudrate settings. Prior to that commit the baudrate was selected based on which predefined standard baudrate did not exceed the requested baudrate. This change of selection logic was never reflected in the atmel serial driver. Thus the comment left in the atmel serial driver is no longer accurate. Additionally the manual rounding up described in that comment and applied via (quot - 1) requests an incorrect baudrate. Since uart_set_options uses tty_termios_encode_baud_rate to determine the appropriate baudrate flags this can cause baudrate selection to fail entirely because tty_termios_encode_baud_rate will only select a baudrate if relative error between requested and selected baudrate does not exceed +/-2%. Fix that by requesting actual, exact baudrate used by the serial. Fixes: ba47f97a18f2 ("serial: core: remove baud_rates when serial console setup") Cc: stable Signed-off-by: Tobias Schramm Acked-by: Richard Genoud Link: https://lore.kernel.org/r/20230109072940.202936-1-t.schramm@manjaro.org Signed-off-by: Greg Kroah-Hartman

dmaengine: tegra210-adma: fix global intr clear

2023-01-24T06:18:01+00:00

commit 9c7e355ccbb33d239360c876dbe49ad5ade65b47 upstream. The current global interrupt clear programming register offset was not correct. Fix the programming with right offset Fixes: ded1f3db4cd6 ("dmaengine: tegra210-adma: prepare for supporting newer Tegra chips") Cc: stable@vger.kernel.org Signed-off-by: Mohan Kumar Link: https://lore.kernel.org/r/20230102064844.31306-1-mkumard@nvidia.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

serial: pch_uart: Pass correct sg to dma_unmap_sg()

2023-01-24T06:18:01+00:00

commit e8914b52e5b024e4af3d810a935fe0805eee8a36 upstream. A local variable sg is used to store scatterlist pointer in pch_dma_tx_complete(). The for loop doing Tx byte accounting before dma_unmap_sg() alters sg in its increment statement. Therefore, the pointer passed into dma_unmap_sg() won't match to the one given to dma_map_sg(). To fix the problem, use priv->sg_tx_p directly in dma_unmap_sg() instead of the local variable. Fixes: da3564ee027e ("pch_uart: add multi-scatter processing") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20230103093435.4396-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb-storage: apply IGNORE_UAS only for HIKSEMI MD202 on RTL9210

2023-01-24T06:18:01+00:00

commit dbd24ec17b85b45f4e823d1aa5607721920f2b05 upstream. The commit e00b488e813f ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS") blacklists UAS for all of RTL9210 enclosures. The RTL9210 controller was advertised with UAS since its release back in 2019 and was shipped with a lot of enclosure products with different firmware combinations. Blacklist UAS only for HIKSEMI MD202. This should hopefully be replaced with more robust method than just comparing strings. But with limited information [1] provided thus far (dmesg when the device is plugged in, which includes manufacturer and product, but no lsusb -v to compare against), this is the best we can do for now. [1] https://lore.kernel.org/all/20230109115550.71688-1-qkrwngud825@gmail.com Fixes: e00b488e813f ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS") Cc: Alan Stern Cc: Hongling Zeng Cc: stable@vger.kernel.org Signed-off-by: Juhyung Park Acked-by: Oliver Neukum Link: https://lore.kernel.org/r/20230117085154.123301-1-qkrwngud825@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()

2023-01-24T06:18:01+00:00

commit c6ec929595c7443250b2a4faea988c62019d5cd2 upstream. In Google internal bug 265639009 we've received an (as yet) unreproducible crash report from an aarch64 GKI 5.10.149-android13 running device. AFAICT the source code is at: https://android.googlesource.com/kernel/common/+/refs/tags/ASB-2022-12-05_13-5.10 The call stack is: ncm_close() -> ncm_notify() -> ncm_do_notify() with the crash at: ncm_do_notify+0x98/0x270 Code: 79000d0b b9000a6c f940012a f9400269 (b9405d4b) Which I believe disassembles to (I don't know ARM assembly, but it looks sane enough to me...): // halfword (16-bit) store presumably to event->wLength (at offset 6 of struct usb_cdc_notification) 0B 0D 00 79 strh w11, [x8, #6] // word (32-bit) store presumably to req->Length (at offset 8 of struct usb_request) 6C 0A 00 B9 str w12, [x19, #8] // x10 (NULL) was read here from offset 0 of valid pointer x9 // IMHO we're reading 'cdev->gadget' and getting NULL // gadget is indeed at offset 0 of struct usb_composite_dev 2A 01 40 F9 ldr x10, [x9] // loading req->buf pointer, which is at offset 0 of struct usb_request 69 02 40 F9 ldr x9, [x19] // x10 is null, crash, appears to be attempt to read cdev->gadget->max_speed 4B 5D 40 B9 ldr w11, [x10, #0x5c] which seems to line up with ncm_do_notify() case NCM_NOTIFY_SPEED code fragment: event->wLength = cpu_to_le16(8); req->length = NCM_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); My analysis of registers and NULL ptr deref crash offset (Unable to handle kernel NULL pointer dereference at virtual address 000000000000005c) heavily suggests that the crash is due to 'cdev->gadget' being NULL when executing: data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); which calls: ncm_bitrate(NULL) which then calls: gadget_is_superspeed(NULL) which reads ((struct usb_gadget *)NULL)->max_speed and hits a panic. AFAICT, if I'm counting right, the offset of max_speed is indeed 0x5C. (remember there's a GKI KABI reservation of 16 bytes in struct work_struct) It's not at all clear to me how this is all supposed to work... but returning 0 seems much better than panic-ing... Cc: Felipe Balbi Cc: Lorenzo Colitti Cc: Carlos Llamas Cc: stable@vger.kernel.org Signed-off-by: Maciej Żenczykowski Cc: stable Link: https://lore.kernel.org/r/20230117131839.1138208-1-maze@google.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: g_webcam: Send color matching descriptor per frame

2023-01-24T06:18:00+00:00

commit e95765e97d9cb93258a4840440d410fa6ff7e819 upstream. Currently the color matching descriptor is only sent across the wire a single time, following the descriptors for each format and frame. According to the UVC 1.5 Specification 3.9.2.6 ("Color Matching Descriptors"): "Only one instance is allowed for a given format and if present, the Color Matching descriptor shall be placed following the Video and Still Image Frame descriptors for that format". Add another reference to the color matching descriptor after the yuyv frames so that it's correctly transmitted for that format too. Fixes: a9914127e834 ("USB gadget: Webcam device") Cc: stable Signed-off-by: Daniel Scally Reviewed-by: Laurent Pinchart Reviewed-by: Kieran Bingham Link: https://lore.kernel.org/r/20221216160528.479094-1-dan.scally@ideasonboard.com Signed-off-by: Greg Kroah-Hartman