kernel/linux.git/drivers, branch v5.4.222

hv_netvsc: Fix race between VF offering and VF association message from host

2022-10-29T08:20:36+00:00

commit 365e1ececb2905f94cc10a5817c5b644a32a3ae2 upstream. During vm boot, there might be possibility that vf registration call comes before the vf association from host to vm. And this might break netvsc vf path, To prevent the same block vf registration until vf bind message comes from host. Cc: stable@vger.kernel.org Fixes: 00d7ddba11436 ("hv_netvsc: pair VF based on serial number") Reviewed-by: Haiyang Zhang Signed-off-by: Gaurav Kohli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ACPI: video: Force backlight native for more TongFang devices

2022-10-29T08:20:36+00:00

commit 3dbc80a3e4c55c4a5b89ef207bed7b7de36157b4 upstream. This commit is very different from the upstream commit! It fixes the same issue by adding more quirks, rather then the general fix from the 6.1 kernel, because the general fix from the 6.1 kernel is part of a larger refactoring of the backlight code which is not suitable for the stable series. As described in "ACPI: video: Drop NL5x?U, PF4NU1F and PF5?U?? acpi_backlight=native quirks" (10212754a0d2) the upstream commit "ACPI: video: Make backlight class device registration a separate step (v2)" (3dbc80a3e4c5) makes these quirks unnecessary. However as mentioned in this bugtracker ticket https://bugzilla.kernel.org/show_bug.cgi?id=215683#c17 the upstream fix is part of a larger patchset that is overall too complex for stable. The TongFang GKxNRxx, GMxNGxx, GMxZGxx, and GMxRGxx / TUXEDO Stellaris/Polaris Gen 1-4, have the same problem as the Clevo NL5xRU and NL5xNU / TUXEDO Aura 15 Gen1 and Gen2: They have a working native and video interface for screen backlight. However the default detection mechanism first registers the video interface before unregistering it again and switching to the native interface during boot. This results in a dangling SBIOS request for backlight change for some reason, causing the backlight to switch to ~2% once per boot on the first power cord connect or disconnect event. Setting the native interface explicitly circumvents this buggy behaviour by avoiding the unregistering process. Reviewed-by: Hans de Goede Signed-off-by: Werner Sembach Signed-off-by: Greg Kroah-Hartman

arm64: topology: move store_cpu_topology() to shared code

2022-10-29T08:20:36+00:00

commit 456797da792fa7cbf6698febf275fe9b36691f78 upstream. arm64's method of defining a default cpu topology requires only minimal changes to apply to RISC-V also. The current arm64 implementation exits early in a uniprocessor configuration by reading MPIDR & claiming that uniprocessor can rely on the default values. This is appears to be a hangover from prior to '3102bc0e6ac7 ("arm64: topology: Stop using MPIDR for topology information")', because the current code just assigns default values for multiprocessor systems. With the MPIDR references removed, store_cpu_topolgy() can be moved to the common arch_topology code. Reviewed-by: Sudeep Holla Acked-by: Catalin Marinas Reviewed-by: Atish Patra Signed-off-by: Conor Dooley Signed-off-by: Greg Kroah-Hartman

iommu/vt-d: Clean up si_domain in the init_dmars() error path

2022-10-29T08:20:35+00:00

[ Upstream commit 620bf9f981365c18cc2766c53d92bf8131c63f32 ] A splat from kmem_cache_destroy() was seen with a kernel prior to commit ee2653bbe89d ("iommu/vt-d: Remove domain and devinfo mempool") when there was a failure in init_dmars(), because the iommu_domain cache still had objects. While the mempool code is now gone, there still is a leak of the si_domain memory if init_dmars() fails. So clean up si_domain in the init_dmars() error path. Cc: Lu Baolu Cc: Joerg Roedel Cc: Will Deacon Cc: Robin Murphy Fixes: 86080ccc223a ("iommu/vt-d: Allocate si_domain in init_dmars()") Signed-off-by: Jerry Snitselaar Link: https://lore.kernel.org/r/20221010144842.308890-1-jsnitsel@redhat.com Signed-off-by: Lu Baolu Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin

net: hns: fix possible memory leak in hnae_ae_register()

2022-10-29T08:20:35+00:00

[ Upstream commit ff2f5ec5d009844ec28f171123f9e58750cef4bf ] Inject fault while probing module, if device_register() fails, but the refcount of kobject is not decreased to 0, the name allocated in dev_set_name() is leaked. Fix this by calling put_device(), so that name can be freed in callback function kobject_cleanup(). unreferenced object 0xffff00c01aba2100 (size 128): comm "systemd-udevd", pid 1259, jiffies 4294903284 (age 294.152s) hex dump (first 32 bytes): 68 6e 61 65 30 00 00 00 18 21 ba 1a c0 00 ff ff hnae0....!...... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000034783f26>] slab_post_alloc_hook+0xa0/0x3e0 [<00000000748188f2>] __kmem_cache_alloc_node+0x164/0x2b0 [<00000000ab0743e8>] __kmalloc_node_track_caller+0x6c/0x390 [<000000006c0ffb13>] kvasprintf+0x8c/0x118 [<00000000fa27bfe1>] kvasprintf_const+0x60/0xc8 [<0000000083e10ed7>] kobject_set_name_vargs+0x3c/0xc0 [<000000000b87affc>] dev_set_name+0x7c/0xa0 [<000000003fd8fe26>] hnae_ae_register+0xcc/0x190 [hnae] [<00000000fe97edc9>] hns_dsaf_ae_init+0x9c/0x108 [hns_dsaf] [<00000000c36ff1eb>] hns_dsaf_probe+0x548/0x748 [hns_dsaf] Fixes: 6fe6611ff275 ("net: add Hisilicon Network Subsystem hnae framework support") Signed-off-by: Yang Yingliang Reviewed-by: Leon Romanovsky Link: https://lore.kernel.org/r/20221018122451.1749171-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: phy: dp83867: Extend RX strap quirk for SGMII mode

2022-10-29T08:20:35+00:00

[ Upstream commit 0c9efbd5c50c64ead434960a404c9c9a097b0403 ] When RX strap in HW is not set to MODE 3 or 4, bit 7 and 8 in CF4 register should be set. The former is already handled in dp83867_config_init; add the latter in SGMII specific initialization. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Signed-off-by: Harini Katakam Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

HID: magicmouse: Do not set BTN_MOUSE on double report

2022-10-29T08:20:35+00:00

[ Upstream commit bb5f0c855dcfc893ae5ed90e4c646bde9e4498bf ] Under certain conditions the Magic Trackpad can group 2 reports in a single packet. The packet is split and the raw event function is invoked recursively for each part. However, after processing each part, the BTN_MOUSE status is updated, sending multiple click events. [1] Return after processing double reports to avoid this issue. Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/811 # [1] Fixes: a462230e16ac ("HID: magicmouse: enable Magic Trackpad support") Reported-by: Nulo Signed-off-by: José Expósito Signed-off-by: Benjamin Tissoires Link: https://lore.kernel.org/r/20221009182747.90730-1-jose.exposito89@gmail.com Signed-off-by: Sasha Levin

ACPI: extlog: Handle multiple records

2022-10-29T08:20:35+00:00

[ Upstream commit f6ec01da40e4139b41179f046044ee7c4f6370dc ] If there is no user space consumer of extlog_mem trace records, then Linux properly handles multiple error records in an ELOG block extlog_print() print_extlog_rcd() __print_extlog_rcd() cper_estatus_print() apei_estatus_for_each_section() But the other code path hard codes looking for a single record to output a trace record. Fix by using the same apei_estatus_for_each_section() iterator to step over all records. Fixes: 2dfb7d51a61d ("trace, RAS: Add eMCA trace event interface") Signed-off-by: Tony Luck Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

r8152: add PID for the Lenovo OneLink+ Dock

2022-10-29T08:20:35+00:00

commit 1bd3a383075c64d638e65d263c9267b08ee7733c upstream. The Lenovo OneLink+ Dock contains an RTL8153 controller that behaves as a broken CDC device by default. Add the custom Lenovo PID to the r8152 driver to support it properly. Also, systems compatible with this dock provide a BIOS option to enable MAC address passthrough (as per Lenovo document "ThinkPad Docking Solutions 2017"). Add the custom PID to the MAC passthrough list too. Tested on a ThinkPad 13 1st gen with the expected results: passthrough disabled: Invalid header when reading pass-thru MAC addr passthrough enabled: Using pass-thru MAC addr XX:XX:XX:XX:XX:XX Signed-off-by: Jean-Francois Le Fillatre Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

media: venus: dec: Handle the case where find_format fails

2022-10-29T08:20:35+00:00

commit 06a2da340f762addc5935bf851d95b14d4692db2 upstream. Debugging the decoder on msm8916 I noticed the vdec probe was crashing if the fmt pointer was NULL. A similar fix from Colin Ian King found by Coverity was implemented for the encoder. Implement the same fix on the decoder. Fixes: 7472c1c69138 ("[media] media: venus: vdec: add video decoder files") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Bryan O'Donoghue Signed-off-by: Stanimir Varbanov Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman