kernel/linux.git/drivers, branch v5.4.198

mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N

2022-06-14T16:12:03+00:00

commit 0a8e98305f63deaf0a799d5cf5532cc83af035d1 upstream. Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") buffered writes fail on S29GL064N. This is because, on S29GL064N, reads return 0xFF at the end of DQ polling for write completion, where as, chip_good() check expects actual data written to the last location to be returned post DQ polling completion. Fix is to revert to using chip_good() for S29GL064N which only checks for DQ lines to settle down to determine write completion. Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/ Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Cc: stable@vger.kernel.org Signed-off-by: Tokunori Ikegami Acked-by: Vignesh Raghavendra Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-3-ikegami.t@gmail.com Signed-off-by: Greg Kroah-Hartman

md/raid0: Ignore RAID0 layout if the second zone has only one device

2022-06-14T16:12:03+00:00

commit ea23994edc4169bd90d7a9b5908c6ccefd82fa40 upstream. The RAID0 layout is irrelevant if all members have the same size so the array has only one zone. It is *also* irrelevant if the array has two zones and the second zone has only one device, for example if the array has two members of different sizes. So in that case it makes sense to allow assembly even when the layout is undefined, like what is done when the array has only one zone. Reviewed-by: NeilBrown Signed-off-by: Pascal Hambourg Signed-off-by: Song Liu Signed-off-by: Greg Kroah-Hartman

Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag

2022-06-14T16:12:03+00:00

commit c42e65664390be7c1ef3838cd84956d3a2739d60 upstream. The bcm5974 driver does the allocation and dma mapping of the usb urb data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag to let usb core know the buffer is already mapped. usb core tries to map the already mapped buffer, causing a warning: "xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory" Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core know buffer is already mapped by bcm5974 driver Signed-off-by: Mathias Nyman Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890 Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

ixgbe: fix unexpected VLAN Rx in promisc mode on VF

2022-06-14T16:12:02+00:00

commit 7bb0fb7c63df95d6027dc50d6af3bc3bbbc25483 upstream. When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE bit (VLAN Promiscuous Enable) is set. This means that the VF will receive packets whose VLAN is not the same than the VLAN of the VF. For instance, in this situation: ┌────────┐ ┌────────┐ ┌────────┐ │ │ │ │ │ │ │ │ │ │ │ │ │ VF0├────┤VF1 VF2├────┤VF3 │ │ │ │ │ │ │ └────────┘ └────────┘ └────────┘ VM1 VM2 VM3 vf 0: vlan 1000 vf 1: vlan 1000 vf 2: vlan 1001 vf 3: vlan 1001 If we tcpdump on VF3, we see all the packets, even those transmitted on vlan 1000. This behavior prevents to bridge VF1 and VF2 in VM2, because it will create a loop: packets transmitted on VF1 will be received by VF2 and vice-versa, and bridged again through the software bridge. This patch remove the activation of VLAN Promiscuous when a VF enables the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast Promiscuous) is kept, so that a VF receives all packets that has the same VLAN, whatever the destination MAC address. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel Signed-off-by: Olivier Matz Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman

ixgbe: fix bcast packets Rx on VF after promisc removal

2022-06-14T16:12:02+00:00

commit 803e9895ea2b0fe80bc85980ae2d7a7e44037914 upstream. After a VF requested to remove the promiscuous flag on an interface, the broadcast packets are not received anymore. This breaks some protocols like ARP. In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM bit (Broadcast Accept) on promiscuous removal. This flag is already set by default in ixgbe_set_vmolr() on VF reset. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel Signed-off-by: Olivier Matz Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman

nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling

2022-06-14T16:12:02+00:00

commit 996419e0594abb311fb958553809f24f38e7abbe upstream. Error paths do not free previously allocated memory. Add devm_kfree() to those failure paths. Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support") Fixes: 4fbcc1a4cb20 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION") Cc: stable@vger.kernel.org Signed-off-by: Martin Faltesek Reviewed-by: Guenter Roeck Reviewed-by: Krzysztof Kozlowski Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION

2022-06-14T16:12:02+00:00

commit 77e5fe8f176a525523ae091d6fd0fbb8834c156d upstream. The first validation check for EVT_TRANSACTION has two different checks tied together with logical AND. One is a check for minimum packet length, and the other is for a valid aid_tag. If either condition is true (fails), then an error should be triggered. The fix is to change && to ||. Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support") Cc: stable@vger.kernel.org Signed-off-by: Martin Faltesek Reviewed-by: Guenter Roeck Reviewed-by: Krzysztof Kozlowski Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

mmc: block: Fix CQE recovery reset success

2022-06-14T16:12:02+00:00

commit a051246b786af7e4a9d9219cc7038a6e8a411531 upstream. The intention of the use of mmc_blk_reset_success() in mmc_blk_cqe_recovery() was to prevent repeated resets when retrying and getting the same error. However, that may not be the case - any amount of time and I/O may pass before another recovery is needed, in which case there would be no reason to deny it the opportunity to recover via a reset if necessary. CQE recovery is expected seldom and failure to recover (if the clear tasks command fails), even more seldom, so it is better to allow the reset always, which can be done by calling mmc_blk_reset_success() always. Fixes: 1e8e55b67030c6 ("mmc: block: Add CQE support") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Link: https://lore.kernel.org/r/20220531171922.76080-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files

2022-06-14T16:12:02+00:00

commit 72aad489f992871e908ff6d9055b26c6366fb864 upstream. The {dma|pio}_mode sysfs files are incorrectly documented as having a list of the supported DMA/PIO transfer modes, while the corresponding fields of the *struct* ata_device hold the transfer mode IDs, not masks. To match these docs, the {dma|pio}_mode (and even xfer_mode!) sysfs files are handled by the ata_bitfield_name_match() macro which leads to reading such kind of nonsense from them: $ cat /sys/class/ata_device/dev3.0/pio_mode XFER_UDMA_7, XFER_UDMA_6, XFER_UDMA_5, XFER_UDMA_4, XFER_MW_DMA_4, XFER_PIO_6, XFER_PIO_5, XFER_PIO_4, XFER_PIO_3, XFER_PIO_2, XFER_PIO_1, XFER_PIO_0 Using the correct ata_bitfield_name_search() macro fixes that: $ cat /sys/class/ata_device/dev3.0/pio_mode XFER_PIO_4 While fixing the file documentation, somewhat reword the {dma|pio}_mode file doc and add a note about being mostly useful for PATA devices to the xfer_mode file doc... Fixes: d9027470b886 ("[libata] Add ATA transport class") Signed-off-by: Sergey Shtylyov Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

vringh: Fix loop descriptors check in the indirect cases

2022-06-14T16:12:02+00:00

[ Upstream commit dbd29e0752286af74243cf891accf472b2f3edd8 ] We should use size of descriptor chain to test loop condition in the indirect case. And another statistical count is also introduced for indirect descriptors to avoid conflict with the statistical count of direct descriptors. Fixes: f87d0fbb5798 ("vringh: host-side implementation of virtio rings.") Signed-off-by: Xie Yongji Signed-off-by: Fam Zheng Message-Id: <20220505100910.137-1-xieyongji@bytedance.com> Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: Sasha Levin