kernel/linux.git/drivers, branch v5.3.1

media: technisat-usb2: break out of loop at end of buffer

2019-09-21T05:19:46+00:00

commit 0c4df39e504bf925ab666132ac3c98d6cbbe380b upstream. Ensure we do not access the buffer beyond the end if no 0xff byte is encountered. Reported-by: syzbot+eaaaf38a95427be88f4b@syzkaller.appspotmail.com Signed-off-by: Sean Young Reviewed-by: Kees Cook Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

floppy: fix usercopy direction

2019-09-21T05:19:45+00:00

commit 52f6f9d74f31078964ca1574f7bb612da7877ac8 upstream. As sparse points out, these two copy_from_user() should actually be copy_to_user(). Fixes: 229b53c9bf4e ("take floppy compat ioctls to sodding floppy.c") Cc: stable@vger.kernel.org Acked-by: Alexander Popov Reviewed-by: Mukesh Ojha Signed-off-by: Jann Horn Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

phy: qcom-qmp: Correct ready status, again

2019-09-21T05:19:45+00:00

commit 14ced7e3a1ae9bed7051df3718c8c7b583854a5c upstream. Despite extensive testing of commit 885bd765963b ("phy: qcom-qmp: Correct READY_STATUS poll break condition") I failed to conclude that the PHYSTATUS bit of the PCS_STATUS register used in PCIe and USB3 falls as the PHY gets ready. Similar to the prior bug with UFS the code will generally get past the check before the transition and thereby "succeed". Correct the name of the register used PCIe and USB3 PHYs, replace mask_pcs_ready with a constant expression depending on the type of the PHY and check for the appropriate ready state. Cc: stable@vger.kernel.org Cc: Vivek Gautam Cc: Evan Green Cc: Niklas Cassel Reported-by: Marc Gonzalez Fixes: 885bd765963b ("phy: qcom-qmp: Correct READY_STATUS poll break condition") Signed-off-by: Bjorn Andersson Tested-by: Marc Gonzalez Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

tty/serial: atmel: reschedule TX after RX was started

2019-09-21T05:19:43+00:00

commit d2ace81bf902a9f11d52e59e5d232d2255a0e353 upstream. When half-duplex RS485 communication is used, after RX is started, TX tasklet still needs to be scheduled tasklet. This avoids console freezing when more data is to be transmitted, if the serial communication is not closed. Fixes: 69646d7a3689 ("tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped") Signed-off-by: Razvan Stefanescu Cc: stable Link: https://lore.kernel.org/r/20190813074025.16218-1-razvan.stefanescu@microchip.com Signed-off-by: Greg Kroah-Hartman

serial: sprd: correct the wrong sequence of arguments

2019-09-21T05:19:43+00:00

commit 9c801e313195addaf11c16e155f50789d6ebfd19 upstream. The sequence of arguments which was passed to handle_lsr_errors() didn't match the parameters defined in that function, &lsr was passed to flag and &flag was passed to lsr, this patch fixed that. Fixes: b7396a38fb28 ("tty/serial: Add Spreadtrum sc9836-uart driver support") Signed-off-by: Chunyan Zhang Signed-off-by: Chunyan Zhang Cc: stable Link: https://lore.kernel.org/r/20190905074151.5268-1-zhang.lyra@gmail.com Signed-off-by: Greg Kroah-Hartman

firmware: google: check if size is valid when decoding VPD data

2019-09-21T05:19:42+00:00

commit 4b708b7b1a2c09fbdfff6b942ebe3a160213aacd upstream. The VPD implementation from Chromium Vital Product Data project used to parse data from untrusted input without checking if the meta data is invalid or corrupted. For example, the size from decoded content may be negative value, or larger than whole input buffer. Such invalid data may cause buffer overflow. To fix that, the size parameters passed to vpd_decode functions should be changed to unsigned integer (u32) type, and the parsing of entry header should be refactored so every size field is correctly verified before starting to decode. Fixes: ad2ac9d5c5e0 ("firmware: Google VPD: import lib_vpd source files") Signed-off-by: Hung-Te Lin Cc: stable Reviewed-by: Guenter Roeck Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20190830022402.214442-1-hungte@chromium.org Signed-off-by: Greg Kroah-Hartman

net: stmmac: Hold rtnl lock in suspend/resume callbacks

2019-09-21T05:19:41+00:00

[ Upstream commit 19e13cb27b998ff49f07e399b5871bfe5ba7e3f0 ] We need to hold rnl lock in suspend and resume callbacks because phylink requires it. Otherwise we will get a WARN() in suspend and resume. Also, move phylink start and stop callbacks to inside device's internal lock so that we prevent concurrent HW accesses. Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Reported-by: Christophe ROULLIER Tested-by: Christophe ROULLIER Signed-off-by: Jose Abreu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

xen-netfront: do not assume sk_buff_head list is empty in error handling

2019-09-21T05:19:39+00:00

[ Upstream commit 00b368502d18f790ab715e055869fd4bb7484a9b ] When skb_shinfo(skb) is not able to cache extra fragment (that is, skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS), xennet_fill_frags() assumes the sk_buff_head list is already empty. As a result, cons is increased only by 1 and returns to error handling path in xennet_poll(). However, if the sk_buff_head list is not empty, queue->rx.rsp_cons may be set incorrectly. That is, queue->rx.rsp_cons would point to the rx ring buffer entries whose queue->rx_skbs[i] and queue->grant_rx_ref[i] are already cleared to NULL. This leads to NULL pointer access in the next iteration to process rx ring buffer entries. Below is how xennet_poll() does error handling. All remaining entries in tmpq are accounted to queue->rx.rsp_cons without assuming how many outstanding skbs are remained in the list. 985 static int xennet_poll(struct napi_struct *napi, int budget) ... ... 1032 if (unlikely(xennet_set_skb_gso(skb, gso))) { 1033 __skb_queue_head(&tmpq, skb); 1034 queue->rx.rsp_cons += skb_queue_len(&tmpq); 1035 goto err; 1036 } It is better to always have the error handling in the same way. Fixes: ad4f15dc2c70 ("xen/netfront: don't bug in case of too many frags") Signed-off-by: Dongli Zhang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

phy: renesas: rcar-gen3-usb2: Disable clearing VBUS in over-current

2019-09-21T05:19:37+00:00

commit e6839c31a608e79f2057fab987dd814f5d3477e6 upstream. The hardware manual should be revised, but the initial value of VBCTRL.OCCLREN is set to 1 actually. If the bit is set, the hardware clears VBCTRL.VBOUT and ADPCTRL.DRVVBUS registers automatically when the hardware detects over-current signal from a USB power switch. However, since the hardware doesn't have any registers which indicates over-current, the driver cannot handle it at all. So, if "is_otg_channel" hardware detects over-current, since ADPCTRL.DRVVBUS register is cleared automatically, the channel cannot be used after that. To resolve this behavior, this patch sets the VBCTRL.OCCLREN to 0 to keep ADPCTRL.DRVVBUS even if the "is_otg_channel" hardware detects over-current. (We assume a USB power switch itself protects over-current and turns the VBUS off.) This patch is inspired by a BSP patch from Kazuya Mizuguchi. Fixes: 1114e2d31731 ("phy: rcar-gen3-usb2: change the mode to OTG on the combined channel") Cc: # v4.5+ Signed-off-by: Yoshihiro Shimoda Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

media: tm6000: double free if usb disconnect while streaming

2019-09-21T05:19:36+00:00

commit 699bf94114151aae4dceb2d9dbf1a6312839dcae upstream. The usb_bulk_urb will kfree'd on disconnect, so ensure the pointer is set to NULL after each free. stop stream urb killing urb buffer free tm6000: got start feed request tm6000_start_feed tm6000: got start stream request tm6000_start_stream tm6000: pipe reset tm6000: got start feed request tm6000_start_feed tm6000: got start feed request tm6000_start_feed tm6000: got start feed request tm6000_start_feed tm6000: got start feed request tm6000_start_feed tm6000: IR URB failure: status: -71, length 0 xhci_hcd 0000:00:14.0: ERROR unknown event type 37 xhci_hcd 0000:00:14.0: ERROR unknown event type 37 tm6000: error tm6000_urb_received usb 1-2: USB disconnect, device number 5 tm6000: disconnecting tm6000 #0 ================================================================== BUG: KASAN: use-after-free in dvb_fini+0x75/0x140 [tm6000_dvb] Read of size 8 at addr ffff888241044060 by task kworker/2:0/22 CPU: 2 PID: 22 Comm: kworker/2:0 Tainted: G W 5.3.0-rc4+ #1 Hardware name: LENOVO 20KHCTO1WW/20KHCTO1WW, BIOS N23ET65W (1.40 ) 07/02/2019 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack+0x9a/0xf0 print_address_description.cold+0xae/0x34f __kasan_report.cold+0x75/0x93 ? tm6000_fillbuf+0x390/0x3c0 [tm6000_alsa] ? dvb_fini+0x75/0x140 [tm6000_dvb] kasan_report+0xe/0x12 dvb_fini+0x75/0x140 [tm6000_dvb] tm6000_close_extension+0x51/0x80 [tm6000] tm6000_usb_disconnect.cold+0xd4/0x105 [tm6000] usb_unbind_interface+0xe4/0x390 device_release_driver_internal+0x121/0x250 bus_remove_device+0x197/0x260 device_del+0x268/0x550 ? __device_links_no_driver+0xd0/0xd0 ? usb_remove_ep_devs+0x30/0x3b usb_disable_device+0x122/0x400 usb_disconnect+0x153/0x430 hub_event+0x800/0x1e40 ? trace_hardirqs_on_thunk+0x1a/0x20 ? hub_port_debounce+0x1f0/0x1f0 ? retint_kernel+0x10/0x10 ? lock_is_held_type+0xf1/0x130 ? hub_port_debounce+0x1f0/0x1f0 ? process_one_work+0x4ae/0xa00 process_one_work+0x4ba/0xa00 ? pwq_dec_nr_in_flight+0x160/0x160 ? do_raw_spin_lock+0x10a/0x1d0 worker_thread+0x7a/0x5c0 ? process_one_work+0xa00/0xa00 kthread+0x1d5/0x200 ? kthread_create_worker_on_cpu+0xd0/0xd0 ret_from_fork+0x3a/0x50 Allocated by task 2682: save_stack+0x1b/0x80 __kasan_kmalloc.constprop.0+0xc2/0xd0 usb_alloc_urb+0x28/0x60 tm6000_start_feed+0x10a/0x300 [tm6000_dvb] dmx_ts_feed_start_filtering+0x86/0x120 [dvb_core] dvb_dmxdev_start_feed+0x121/0x180 [dvb_core] dvb_dmxdev_filter_start+0xcb/0x540 [dvb_core] dvb_demux_do_ioctl+0x7ed/0x890 [dvb_core] dvb_usercopy+0x97/0x1f0 [dvb_core] dvb_demux_ioctl+0x11/0x20 [dvb_core] do_vfs_ioctl+0x5d8/0x9d0 ksys_ioctl+0x5e/0x90 __x64_sys_ioctl+0x3d/0x50 do_syscall_64+0x74/0xe0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 22: save_stack+0x1b/0x80 __kasan_slab_free+0x12c/0x170 kfree+0xfd/0x3a0 xhci_giveback_urb_in_irq+0xfe/0x230 xhci_td_cleanup+0x276/0x340 xhci_irq+0x1129/0x3720 __handle_irq_event_percpu+0x6e/0x420 handle_irq_event_percpu+0x6f/0x100 handle_irq_event+0x55/0x84 handle_edge_irq+0x108/0x3b0 handle_irq+0x2e/0x40 do_IRQ+0x83/0x1a0 Cc: stable@vger.kernel.org Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman