kernel/linux.git/drivers, branch v5.17.9

net: phy: micrel: Fix incorrect variable type in micrel

2022-05-18T08:28:23+00:00

commit 12a4d677b1c34717443470c1492fe520638ef39a upstream. In lanphy_read_page_reg, calling __phy_read() might return a negative error code. Use 'int' to check the error code. Fixes: 7c2dcfa295b1 ("net: phy: micrel: Add support for LAN8804 PHY") Signed-off-by: Wan Jiabing Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220509144519.2343399-1-wanjiabing@vivo.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

dma-buf: call dma_buf_stats_setup after dmabuf is in valid list

2022-05-18T08:28:23+00:00

commit ef3a6b70507a2add2cd2e01f5eb9b54d561bacb9 upstream. When dma_buf_stats_setup() fails, it closes the dmabuf file which results into the calling of dma_buf_file_release() where it does list_del(&dmabuf->list_node) with out first adding it to the proper list. This is resulting into panic in the below path: __list_del_entry_valid+0x38/0xac dma_buf_file_release+0x74/0x158 __fput+0xf4/0x428 ____fput+0x14/0x24 task_work_run+0x178/0x24c do_notify_resume+0x194/0x264 work_pending+0xc/0x5f0 Fix it by moving the dma_buf_stats_setup() after dmabuf is added to the list. Fixes: bdb8d06dfefd ("dmabuf: Add the capability to expose DMA-BUF stats in sysfs") Signed-off-by: Charan Teja Reddy Tested-by: T.J. Mercier Acked-by: T.J. Mercier Cc: # 5.15.x+ Reviewed-by: Christian König Signed-off-by: Christian König Link: https://patchwork.freedesktop.org/patch/msgid/1652125797-2043-1-git-send-email-quic_charante@quicinc.com Signed-off-by: Greg Kroah-Hartman

Revert "drm/amd/pm: keep the BACO feature enabled for suspend"

2022-05-18T08:28:22+00:00

commit a56f445f807b0276fc0660c330bf93a9ea78e8ea upstream. This reverts commit eaa090538e8d21801c6d5f94590c3799e6a528b5. Commit ebc002e3ee78 ("drm/amdgpu: don't use BACO for reset in S3") stops using BACO for reset during suspend, so it's no longer necessary to leave BACO enabled during suspend. This fixes resume from suspend on the navy flounder dGPU in the ASUS ROG Strix G513QY. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2008 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1982 Reviewed-by: Lijo Lazar Reviewed-by: Mario Limonciello Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: Initialize drm_mode_fb_cmd2

2022-05-18T08:28:22+00:00

commit 3059d9b9f6aa433a55b9d0d21b566396d5497c33 upstream. Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags and modifiers which were never initialized. Garbage in those members can cause random failures during the bringup of the fbcon. Initializing the structure fixes random blank screens after bootup due to flags/modifiers mismatches during the fbcon bring up. Fixes: dabdcdc9822a ("drm/vmwgfx: Switch to mode_cmd2") Signed-off-by: Zack Rusin Cc: Daniel Vetter Cc: # v4.10+ Reviewed-by: Martin Krastev Reviewed-by: Maaz Mombasawala Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org Signed-off-by: Greg Kroah-Hartman

net: phy: micrel: Pass .probe for KS8737

2022-05-18T08:28:22+00:00

commit 15f03ffe4bb951e982457f44b6cf6b06ef4cbb93 upstream. Since commit f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") the kszphy_suspend/ resume hooks are used. These functions require the probe function to be called so that priv can be allocated. Otherwise, a NULL pointer dereference happens inside kszphy_config_reset(). Cc: stable@vger.kernel.org Fixes: f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") Reported-by: Andrew Lunn Signed-off-by: Fabio Estevam Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220504143104.1286960-2-festevam@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: phy: micrel: Do not use kszphy_suspend/resume for KSZ8061

2022-05-18T08:28:22+00:00

commit e333eed63a091a09bd0db191b7710c594c6e995b upstream. Since commit f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") the following NULL pointer dereference is observed on a board with KSZ8061: # udhcpc -i eth0 udhcpc: started, v1.35.0 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = f73cef4e [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94 Hardware name: Freescale i.MX6 SoloX (Device Tree) PC is at kszphy_config_reset+0x10/0x114 LR is at kszphy_resume+0x24/0x64 ... The KSZ8061 phy_driver structure does not have the .probe/..driver_data fields, which means that priv is not allocated. This causes the NULL pointer dereference inside kszphy_config_reset(). Fix the problem by using the generic suspend/resume functions as before. Another alternative would be to provide the .probe and .driver_data information into the structure, but to be on the safe side, let's just restore Ethernet functionality by using the generic suspend/resume. Cc: stable@vger.kernel.org Fixes: f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") Signed-off-by: Fabio Estevam Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220504143104.1286960-1-festevam@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

ath11k: reduce the wait time of 11d scan and hw scan while add interface

2022-05-18T08:28:22+00:00

commit bb300130e47fcefbe938f06dbacaef0312e28416 upstream. (cherry picked from commit 1f682dc9fb3790aa7ec27d3d122ff32b1eda1365 in wireless-next) Currently ath11k will wait 11d scan complete while add interface in ath11k_mac_op_add_interface(), when system resume without enable wowlan, ath11k_mac_op_add_interface() is called for each resume, thus it increase the resume time of system. And ath11k_mac_op_hw_scan() after ath11k_mac_op_add_interface() also needs some time cost because the previous 11d scan need more than 5 seconds when 6 GHz is enabled, then the scan started event will indicated to ath11k after the 11d scan completed. While 11d scan/hw scan is running in firmware, if ath11k update channel list to firmware by WMI_SCAN_CHAN_LIST_CMDID, then firmware will cancel the current scan which is running, it lead the scan failed. The patch commit 9dcf6808b253 ("ath11k: add 11d scan offload support") used finish_11d_scan/finish_11d_ch_list/pending_11d to synchronize the 11d scan/hw scan/channel list between ath11k/firmware/mac80211 and to avoid the scan fail. Add wait operation before ath11k update channel list, function ath11k_reg_update_chan_list() will wait until the current 11d scan/hw scan completed. And remove the wait operation of start 11d scan and waiting channel list complete in hw scan. After these changes, resume time cost reduce about 5 seconds and also hw scan time cost reduced obviously, and scan failed not seen. The 11d scan is sent to firmware only one time for each interface added in mac.c, and it is moved after the 1st hw scan because 11d scan will cost some time and thus leads the AP scan result update to UI delay. Currently priority of ath11k's hw scan is WMI_SCAN_PRIORITY_LOW, and priority of 11d scan in firmware is WMI_SCAN_PRIORITY_MEDIUM, then the 11d scan which sent after hw scan will cancel the hw scan in firmware, so change the priority to WMI_SCAN_PRIORITY_MEDIUM for the hw scan which is in front of the 11d scan, thus it will not happen scan cancel in firmware. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 9dcf6808b253 ("ath11k: add 11d scan offload support") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215777 Cc: Signed-off-by: Wen Gong Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220328035832.14122-1-quic_wgong@quicinc.com Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220427111619.9758-1-kvalo@kernel.org Signed-off-by: Greg Kroah-Hartman

net: phy: Fix race condition on link status change

2022-05-18T08:28:21+00:00

commit 91a7cda1f4b8bdf770000a3b60640576dafe0cec upstream. This fixes the following error caused by a race condition between phydev->adjust_link() and a MDIO transaction in the phy interrupt handler. The issue was reproduced with the ethernet FEC driver and a micrel KSZ9031 phy. [ 146.195696] fec 2188000.ethernet eth0: MDIO read timeout [ 146.201779] ------------[ cut here ]------------ [ 146.206671] WARNING: CPU: 0 PID: 571 at drivers/net/phy/phy.c:942 phy_error+0x24/0x6c [ 146.214744] Modules linked in: bnep imx_vdoa imx_sdma evbug [ 146.220640] CPU: 0 PID: 571 Comm: irq/128-2188000 Not tainted 5.18.0-rc3-00080-gd569e86915b7 #9 [ 146.229563] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 146.236257] unwind_backtrace from show_stack+0x10/0x14 [ 146.241640] show_stack from dump_stack_lvl+0x58/0x70 [ 146.246841] dump_stack_lvl from __warn+0xb4/0x24c [ 146.251772] __warn from warn_slowpath_fmt+0x5c/0xd4 [ 146.256873] warn_slowpath_fmt from phy_error+0x24/0x6c [ 146.262249] phy_error from kszphy_handle_interrupt+0x40/0x48 [ 146.268159] kszphy_handle_interrupt from irq_thread_fn+0x1c/0x78 [ 146.274417] irq_thread_fn from irq_thread+0xf0/0x1dc [ 146.279605] irq_thread from kthread+0xe4/0x104 [ 146.284267] kthread from ret_from_fork+0x14/0x28 [ 146.289164] Exception stack(0xe6fa1fb0 to 0xe6fa1ff8) [ 146.294448] 1fa0: 00000000 00000000 00000000 00000000 [ 146.302842] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 146.311281] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 146.318262] irq event stamp: 12325 [ 146.321780] hardirqs last enabled at (12333): [] __up_console_sem+0x50/0x60 [ 146.330013] hardirqs last disabled at (12342): [] __up_console_sem+0x3c/0x60 [ 146.338259] softirqs last enabled at (12324): [] __do_softirq+0x2c0/0x624 [ 146.346311] softirqs last disabled at (12319): [] __irq_exit_rcu+0x138/0x178 [ 146.354447] ---[ end trace 0000000000000000 ]--- With the FEC driver phydev->adjust_link() calls fec_enet_adjust_link() calls fec_stop()/fec_restart() and both these function reset and temporary disable the FEC disrupting any MII transaction that could be happening at the same time. fec_enet_adjust_link() and phy_read() can be running at the same time when we have one additional interrupt before the phy_state_machine() is able to terminate. Thread 1 (phylib WQ) | Thread 2 (phy interrupt) | | phy_interrupt() <-- PHY IRQ | handle_interrupt() | phy_read() | phy_trigger_machine() | --> schedule phylib WQ | | phy_state_machine() | phy_check_link_status() | phy_link_change() | phydev->adjust_link() | fec_enet_adjust_link() | --> FEC reset | phy_interrupt() <-- PHY IRQ | phy_read() | Fix this by acquiring the phydev lock in phy_interrupt(). Link: https://lore.kernel.org/all/20220422152612.GA510015@francesco-nb.int.toradex.com/ Fixes: c974bdbc3e77 ("net: phy: Use threaded IRQ, to allow IRQ from sleeping devices") cc: Signed-off-by: Francesco Dolcini Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220506060815.327382-1-francesco.dolcini@toradex.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: atlantic: always deep reset on pm op, fixing up my null deref regression

2022-05-18T08:28:21+00:00

commit 1809c30b6e5a83a1de1435fe01aaa4de4d626a7c upstream. The impact of this regression is the same for resume that I saw on thaw: the kernel hangs and nothing except SysRq rebooting can be done. Fixes regression in commit cbe6c3a8f8f4 ("net: atlantic: invert deep par in pm functions, preventing null derefs"), where I disabled deep pm resets in suspend and resume, trying to make sense of the atl_resume_common() deep parameter in the first place. It turns out, that atlantic always has to deep reset on pm operations. Even though I expected that and tested resume, I screwed up by kexec-rebooting into an unpatched kernel, thus missing the breakage. This fixup obsoletes the deep parameter of atl_resume_common, but I leave the cleanup for the maintainers to post to mainline. Suspend and hibernation were successfully tested by the reporters. Fixes: cbe6c3a8f8f4 ("net: atlantic: invert deep par in pm functions, preventing null derefs") Link: https://lore.kernel.org/regressions/9-Ehc_xXSwdXcvZqKD5aSqsqeNj5Izco4MYEwnx5cySXVEc9-x_WC4C3kAoCqNTi-H38frroUK17iobNVnkLtW36V6VWGSQEOHXhmVMm5iQ=@protonmail.com/ Reported-by: Jordan Leppert Reported-by: Holger Hoffstaette Tested-by: Jordan Leppert Tested-by: Holger Hoffstaette CC: # 5.10+ Signed-off-by: Manuel Ullmann Link: https://lore.kernel.org/r/87bkw8dfmp.fsf@posteo.de Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

i40e: i40e_main: fix a missing check on list iterator

2022-05-18T08:28:21+00:00

commit 3f95a7472d14abef284d8968734fe2ae7ff4845f upstream. The bug is here: ret = i40e_add_macvlan_filter(hw, ch->seid, vdev->dev_addr, &aq_err); The list iterator 'ch' will point to a bogus position containing HEAD if the list is empty or no element is found. This case must be checked before any use of the iterator, otherwise it will lead to a invalid memory access. To fix this bug, use a new variable 'iter' as the list iterator, while use the origin variable 'ch' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 1d8d80b4e4ff6 ("i40e: Add macvlan support on i40e") Signed-off-by: Xiaomeng Tong Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Link: https://lore.kernel.org/r/20220510204846.2166999-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman