kernel/linux.git/drivers, branch v5.10.53

drm/panel: nt35510: Do not fail if DSI read fails

2021-07-25T12:36:21+00:00

commit 1988e0d84161dabd99d1c27033fbd6ee439bf432 upstream. Failing to read the MTP over DSI should not bring down the system and make us bail out from using the display, it turns out that this happens when toggling the display off and on, and that write is often still working so the display output is just fine. Printing an error is enough. Tested by killing the Gnome session repeatedly on the Samsung Skomer. Fixes: 899f24ed8d3a ("drm/panel: Add driver for Novatek NT35510-based panels") Cc: Stephan Gerhold Reported-by: newbyte@disroot.org Acked-by: Stefan Hansson Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20210603231830.3200040-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman

dma-buf/sync_file: Don't leak fences on merge failure

2021-07-25T12:36:20+00:00

commit ffe000217c5068c5da07ccb1c0f8cce7ad767435 upstream. Each add_fence() call does a dma_fence_get() on the relevant fence. In the error path, we weren't calling dma_fence_put() so all those fences got leaked. Also, in the krealloc_array failure case, we weren't freeing the fences array. Instead, ensure that i and fences are always zero-initialized and dma_fence_put() all the fences and kfree(fences) on every error path. Signed-off-by: Jason Ekstrand Reviewed-by: Christian König Fixes: a02b9dc90d84 ("dma-buf/sync_file: refactor fence storage in struct sync_file") Cc: Gustavo Padovan Cc: Christian König Link: https://patchwork.freedesktop.org/patch/msgid/20210624174732.1754546-1-jason@jlekstrand.net Signed-off-by: Christian König Signed-off-by: Greg Kroah-Hartman

net: fddi: fix UAF in fza_probe

2021-07-25T12:36:20+00:00

commit deb7178eb940e2c5caca1b1db084a69b2e59b4c9 upstream. fp is netdev private data and it cannot be used after free_netdev() call. Using fp after free_netdev() can cause UAF bug. Fix it by moving free_netdev() after error message. Fixes: 61414f5ec983 ("FDDI: defza: Add support for DEC FDDIcontroller 700 TURBOchannel adapter") Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ti: fix UAF in tlan_remove_one

2021-07-25T12:36:20+00:00

commit 0336f8ffece62f882ab3012820965a786a983f70 upstream. priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 1e0a8b13d355 ("tlan: cancel work at remove path") Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: qcom/emac: fix UAF in emac_remove

2021-07-25T12:36:19+00:00

commit ad297cd2db8953e2202970e9504cab247b6c7cb4 upstream. adpt is netdev private data and it cannot be used after free_netdev() call. Using adpt after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 54e19bc74f33 ("net: qcom/emac: do not use devm on internal phy pdev") Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: moxa: fix UAF in moxart_mac_probe

2021-07-25T12:36:19+00:00

commit c78eaeebe855fd93f2e77142ffd0404a54070d84 upstream. In case of netdev registration failure the code path will jump to init_fail label: init_fail: netdev_err(ndev, "init failed\n"); moxart_mac_free_memory(ndev); irq_map_fail: free_netdev(ndev); return ret; So, there is no need to call free_netdev() before jumping to error handling path, since it can cause UAF or double-free bug. Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: bcmgenet: Ensure all TX/RX queues DMAs are disabled

2021-07-25T12:36:19+00:00

commit 2b452550a203d88112eaf0ba9fc4b750a000b496 upstream. Make sure that we disable each of the TX and RX queues in the TDMA and RDMA control registers. This is a correctness change to be symmetrical with the code that enables the TX and RX queues. Tested-by: Maxime Ripard Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops

2021-07-25T12:36:19+00:00

commit 09adf7566d436322ced595b166dea48b06852efe upstream. There are two pointers in struct xfrm_state_offload, *dev, *real_dev. These are used in callback functions of struct xfrmdev_ops. The *dev points whether bonding interface or real interface. If bonding ipsec offload is used, it points bonding interface If not, it points real interface. And real_dev always points real interface. So, netdevsim should always use real_dev instead of dev. Of course, real_dev always not be null. Test commands: ip netns add A ip netns exec A bash modprobe netdevsim echo "1 1" > /sys/bus/netdevsim/new_device ip link add bond0 type bond mode active-backup ip link set eth0 master bond0 ip link set eth0 up ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \ transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \ dst 14.0.0.70/24 proto tcp offload dev bond0 dir in Splat looks like: BUG: spinlock bad magic on CPU#5, kworker/5:1/53 lock: 0xffff8881068c2cc8, .magic: 11121314, .owner: /-1, .owner_cpu: -235736076 CPU: 5 PID: 53 Comm: kworker/5:1 Not tainted 5.13.0-rc3+ #1168 Workqueue: events linkwatch_event Call Trace: dump_stack+0xa4/0xe5 do_raw_spin_lock+0x20b/0x270 ? rwlock_bug.part.1+0x90/0x90 _raw_spin_lock_nested+0x5f/0x70 bond_get_stats+0xe4/0x4c0 [bonding] ? rcu_read_lock_sched_held+0xc0/0xc0 ? bond_neigh_init+0x2c0/0x2c0 [bonding] ? dev_get_alias+0xe2/0x190 ? dev_get_port_parent_id+0x14a/0x360 ? rtnl_unregister+0x190/0x190 ? dev_get_phys_port_name+0xa0/0xa0 ? memset+0x1f/0x40 ? memcpy+0x38/0x60 ? rtnl_phys_switch_id_fill+0x91/0x100 dev_get_stats+0x8c/0x270 rtnl_fill_stats+0x44/0xbe0 ? nla_put+0xbe/0x140 rtnl_fill_ifinfo+0x1054/0x3ad0 [ ... ] Fixes: 272c2330adc9 ("xfrm: bail early on slave pass over skb") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vmxnet3: fix cksum offload issues for tunnels with non-default udp ports

2021-07-25T12:36:19+00:00

commit b22580233d473dbf7bbfa4f6549c09e2c80e9e64 upstream. Commit dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support") added support for encapsulation offload. However, the inner offload capability is to be restricted to UDP tunnels with default Vxlan and Geneve ports. This patch fixes the issue for tunnels with non-default ports using features check capability and filtering appropriate features for such tunnels. Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support") Signed-off-by: Ronak Doshi Acked-by: Guolin Yang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: mv88e6xxx: enable devlink ATU hash param for Topaz

2021-07-25T12:36:18+00:00

commit c07fff3492acae41cedbabea395b644dd5872b8c upstream. Commit 23e8b470c7788 ("net: dsa: mv88e6xxx: Add devlink param for ATU hash algorithm.") introduced ATU hash algorithm access via devlink, but did not enable it for Topaz. Enable this feature also for Topaz. Signed-off-by: Marek Behún Fixes: 23e8b470c7788 ("net: dsa: mv88e6xxx: Add devlink param for ATU hash algorithm.") Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman