kernel/linux.git/drivers, branch v5.10.40

video: hgafb: correctly handle card detect failure during probe

2021-05-26T10:06:57+00:00

commit 02625c965239b71869326dd0461615f27307ecb3 upstream. The return value of hga_card_detect() is not properly handled causing the probe to succeed even though hga_card_detect() failed. Since probe succeeds, hgafb_open() can be called which will end up operating on an unmapped hga_vram. This results in an out-of-bounds access as reported by kernel test robot [1]. To fix this, correctly detect failure of hga_card_detect() by checking for a non-zero error code. [1]: https://lore.kernel.org/lkml/20210516150019.GB25903@xsang-OptiPlex-9020/ Fixes: dc13cac4862c ("video: hgafb: fix potential NULL pointer dereference") Cc: stable Reported-by: kernel test robot Reviewed-by: Igor Matheus Andrade Torrente Signed-off-by: Anirudh Rayabharam Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210516192714.25823-1-mail@anirudhrb.com Signed-off-by: Greg Kroah-Hartman

nvmet: use new ana_log_size instead the old one

2021-05-26T10:06:57+00:00

commit e181811bd04d874fe48bbfa1165a82068b58144d upstream. The new ana_log_size should be used instead of the old one. Or kernel NULL pointer dereference will happen like below: [ 38.957849][ T69] BUG: kernel NULL pointer dereference, address: 000000000000003c [ 38.975550][ T69] #PF: supervisor write access in kernel mode [ 38.975955][ T69] #PF: error_code(0x0002) - not-present page [ 38.976905][ T69] PGD 0 P4D 0 [ 38.979388][ T69] Oops: 0002 [#1] SMP NOPTI [ 38.980488][ T69] CPU: 0 PID: 69 Comm: kworker/0:2 Not tainted 5.12.0+ #54 [ 38.981254][ T69] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 38.982502][ T69] Workqueue: events nvme_loop_execute_work [ 38.985219][ T69] RIP: 0010:memcpy_orig+0x68/0x10f [ 38.986203][ T69] Code: 83 c2 20 eb 44 48 01 d6 48 01 d7 48 83 ea 20 0f 1f 00 48 83 ea 20 4c 8b 46 f8 4c 8b 4e f0 4c 8b 56 e8 4c 8b 5e e0 48 8d 76 e0 <4c> 89 47 f8 4c 89 4f f0 4c 89 57 e8 4c 89 5f e0 48 8d 7f e0 73 d2 [ 38.987677][ T69] RSP: 0018:ffffc900001b7d48 EFLAGS: 00000287 [ 38.987996][ T69] RAX: 0000000000000020 RBX: 0000000000000024 RCX: 0000000000000010 [ 38.988327][ T69] RDX: ffffffffffffffe4 RSI: ffff8881084bc004 RDI: 0000000000000044 [ 38.988620][ T69] RBP: 0000000000000024 R08: 0000000100000000 R09: 0000000000000000 [ 38.988991][ T69] R10: 0000000100000000 R11: 0000000000000001 R12: 0000000000000024 [ 38.989289][ T69] R13: ffff8881084bc000 R14: 0000000000000000 R15: 0000000000000024 [ 38.989845][ T69] FS: 0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 [ 38.990234][ T69] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 38.990490][ T69] CR2: 000000000000003c CR3: 00000001085b2000 CR4: 00000000000006f0 [ 38.991105][ T69] Call Trace: [ 38.994157][ T69] sg_copy_buffer+0xb8/0xf0 [ 38.995357][ T69] nvmet_copy_to_sgl+0x48/0x6d [ 38.995565][ T69] nvmet_execute_get_log_page_ana+0xd4/0x1cb [ 38.995792][ T69] nvmet_execute_get_log_page+0xc9/0x146 [ 38.995992][ T69] nvme_loop_execute_work+0x3e/0x44 [ 38.996181][ T69] process_one_work+0x1c3/0x3c0 [ 38.996393][ T69] worker_thread+0x44/0x3d0 [ 38.996600][ T69] ? cancel_delayed_work+0x90/0x90 [ 38.996804][ T69] kthread+0xf7/0x130 [ 38.996961][ T69] ? kthread_create_worker_on_cpu+0x70/0x70 [ 38.997171][ T69] ret_from_fork+0x22/0x30 [ 38.997705][ T69] Modules linked in: [ 38.998741][ T69] CR2: 000000000000003c [ 39.000104][ T69] ---[ end trace e719927b609d0fa0 ]--- Fixes: 5e1f689913a4 ("nvme-multipath: fix double initialization of ANA state") Signed-off-by: Hou Pu Signed-off-by: Christoph Hellwig Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

rtc: pcf85063: fallback to parent of_node

2021-05-26T10:06:57+00:00

commit 03531606ef4cda25b629f500d1ffb6173b805c05 upstream. The rtc device node is always NULL. Since v5.12-rc1-dontuse/3c9ea42802a1fbf7ef29660ff8c6e526c58114f6 this will lead to a NULL pointer dereference. To fix this use the parent node which is the i2c client node as set by devm_rtc_allocate_device(). Using the i2c client node seems to be what other similar drivers do e.g. rtc-pcf8563.c. Signed-off-by: Francois Gervais Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210310211026.27299-1-fgervais@distech-controls.com Signed-off-by: Greg Kroah-Hartman

nvme-multipath: fix double initialization of ANA state

2021-05-26T10:06:57+00:00

commit 5e1f689913a4498e3081093670ef9d85b2c60920 upstream. nvme_init_identify and thus nvme_mpath_init can be called multiple times and thus must not overwrite potentially initialized or in-use fields. Split out a helper for the basic initialization when the controller is initialized and make sure the init_identify path does not blindly change in-use data structures. Fixes: 0d0b660f214d ("nvme: add ANA support") Reported-by: Martin Wilck Signed-off-by: Christoph Hellwig Reviewed-by: Keith Busch Reviewed-by: Sagi Grimberg Reviewed-by: Hannes Reinecke Signed-off-by: Greg Kroah-Hartman

drm/i915/gt: Disable HiZ Raw Stall Optimization on broken gen7

2021-05-26T10:06:57+00:00

commit 023dfa9602f561952c0e19d74f66614a56d7e57a upstream. When resetting CACHE_MODE registers, don't enable HiZ Raw Stall Optimization on Ivybridge GT1 and Baytrail, as it causes severe glitches when rendering any kind of 3D accelerated content. This optimization is disabled on these platforms by default according to official documentation from 01.org. Fixes: ef99a60ffd9b ("drm/i915/gt: Clear CACHE_MODE prior to clearing residuals") BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3081 BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3404 BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3071 Reviewed-by: Manuel Bentele Signed-off-by: Simon Rettberg Reviewed-by: Dave Airlie Signed-off-by: Rodrigo Vivi [Rodrigo removed invalid Fixes line] Link: https://patchwork.freedesktop.org/patch/msgid/20210426161124.2b7fd708@dellnichtsogutkiste (cherry picked from commit 929b734ad34b717d6a1b8de97f53bb5616040147) Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman

tty: vt: always invoke vc->vc_sw->con_resize callback

2021-05-26T10:06:56+00:00

commit ffb324e6f874121f7dce5bdae5e05d02baae7269 upstream. syzbot is reporting OOB write at vga16fb_imageblit() [1], for resize_screen() from ioctl(VT_RESIZE) returns 0 without checking whether requested rows/columns fit the amount of memory reserved for the graphical screen if current mode is KD_GRAPHICS. ---------- #include #include #include #include #include #include int main(int argc, char *argv[]) { const int fd = open("/dev/char/4:1", O_RDWR); struct vt_sizes vt = { 0x4100, 2 }; ioctl(fd, KDSETMODE, KD_GRAPHICS); ioctl(fd, VT_RESIZE, &vt); ioctl(fd, KDSETMODE, KD_TEXT); return 0; } ---------- Allow framebuffer drivers to return -EINVAL, by moving vc->vc_mode != KD_GRAPHICS check from resize_screen() to fbcon_resize(). Link: https://syzkaller.appspot.com/bug?extid=1f29e126cf461c4de3b3 [1] Reported-by: syzbot Suggested-by: Linus Torvalds Signed-off-by: Tetsuo Handa Tested-by: syzbot Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

vt: Fix character height handling with VT_RESIZEX

2021-05-26T10:06:56+00:00

commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream. Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

vt_ioctl: Revert VT_RESIZEX parameter handling removal

2021-05-26T10:06:56+00:00

commit a90c275eb144c1b755f04769e1f29d832d6daeaf upstream. Revert the removal of code handling extra VT_RESIZEX ioctl's parameters beyond those that VT_RESIZE supports, fixing a functional regression causing `svgatextmode' not to resize the VT anymore. As a consequence of the reverted change when the video adapter is reprogrammed from the original say 80x25 text mode using a 9x16 character cell (720x400 pixel resolution) to say 80x37 text mode and the same character cell (720x592 pixel resolution), the VT geometry does not get updated and only upper two thirds of the screen are used for the VT, and the lower part remains blank. The proportions change according to text mode geometries chosen. Revert the change verbatim then, bringing back previous VT resizing. Signed-off-by: Maciej W. Rozycki Fixes: 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

vgacon: Record video mode changes with VT_RESIZEX

2021-05-26T10:06:56+00:00

commit d4d0ad57b3865795c4cde2fb5094c594c2e8f469 upstream. Fix an issue with VGA console font size changes made after the initial video text mode has been changed with a user tool like `svgatextmode' calling the VT_RESIZEX ioctl. As it stands in that case the original screen geometry continues being used to validate further VT resizing. Consequently when the video adapter is firstly reprogrammed from the original say 80x25 text mode using a 9x16 character cell (720x400 pixel resolution) to say 80x37 text mode and the same character cell (720x592 pixel resolution), and secondly the CRTC character cell updated to 9x8 (by loading a suitable font with the KD_FONT_OP_SET request of the KDFONTOP ioctl), the VT geometry does not get further updated from 80x37 and only upper half of the screen is used for the VT, with the lower half showing rubbish corresponding to whatever happens to be there in the video memory that maps to that part of the screen. Of course the proportions change according to text mode geometries and font sizes chosen. Address the problem then, by updating the text mode geometry defaults rather than checking against them whenever the VT is resized via a user ioctl. Signed-off-by: Maciej W. Rozycki Fixes: e400b6ec4ede ("vt/vgacon: Check if screen resize request comes from userspace") Cc: stable@vger.kernel.org # v2.6.24+ Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

video: hgafb: fix potential NULL pointer dereference

2021-05-26T10:06:56+00:00

commit dc13cac4862cc68ec74348a80b6942532b7735fa upstream. The return of ioremap if not checked, and can lead to a NULL to be assigned to hga_vram. Potentially leading to a NULL pointer dereference. The fix adds code to deal with this case in the error label and changes how the hgafb_probe handles the return of hga_card_detect. Cc: Ferenc Bakonyi Cc: Bartlomiej Zolnierkiewicz Cc: stable Signed-off-by: Igor Matheus Andrade Torrente Link: https://lore.kernel.org/r/20210503115736.2104747-40-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman