kernel/linux.git/drivers, branch v5.10.31

xen/events: fix setting irq affinity

2021-04-16T09:43:22+00:00

The backport of upstream patch 25da4618af240fbec61 ("xen/events: don't unmask an event channel when an eoi is pending") introduced a regression for stable kernels 5.10 and older: setting IRQ affinity for IRQs related to interdomain events would no longer work, as moving the IRQ to its new cpu was not included in the irq_ack callback for those events. Fix that by adding the needed call. Note that kernels 5.11 and later don't need the explicit moving of the IRQ to the target cpu in the irq_ack callback, due to a rework of the affinity setting in kernel 5.11. Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

net: sfp: cope with SFPs that set both LOS normal and LOS inverted

2021-04-16T09:43:22+00:00

commit 624407d2cf14ff58e53bf4b2af9595c4f21d606e upstream. The SFP MSA defines two option bits in byte 65 to indicate how the Rx_LOS signal on SFP pin 8 behaves: bit 2 - Loss of Signal implemented, signal inverted from standard definition in SFP MSA (often called "Signal Detect"). bit 1 - Loss of Signal implemented, signal as defined in SFP MSA (often called "Rx_LOS"). Clearly, setting both bits results in a meaningless situation: it would mean that LOS is implemented in both the normal sense (1 = signal loss) and inverted sense (0 = signal loss). Unfortunately, there are modules out there which set both bits, which will be initially interpret as "inverted" sense, and then, if the LOS signal changes state, we will toggle between LINK_UP and WAIT_LOS states. Change our LOS handling to give well defined behaviour: only interpret these bits as meaningful if exactly one is set, otherwise treat it as if LOS is not implemented. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/E1kyYQa-0004iR-CU@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski Cc: Pali Rohár Signed-off-by: Greg Kroah-Hartman

net: sfp: relax bitrate-derived mode check

2021-04-16T09:43:22+00:00

commit 7a77233ec6d114322e2c4f71b4e26dbecd9ea8a7 upstream. Do not check the encoding when deriving 1000BASE-X from the bitrate when no other modes are discovered. Some GPON modules (VSOL V2801F and CarlitoxxPro CPGOS03-0490 v2.0) indicate NRZ encoding with a 1200Mbaud bitrate, but should be driven with 1000BASE-X on the host side. Tested-by: Pali Rohár Reviewed-by: Andrew Lunn Signed-off-by: Russell King Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

null_blk: fix command timeout completion handling

2021-04-16T09:43:21+00:00

[ Upstream commit de3510e52b0a398261271455562458003b8eea62 ] Memory backed or zoned null block devices may generate actual request timeout errors due to the submission path being blocked on memory allocation or zone locking. Unlike fake timeouts or injected timeouts, the request submission path will call blk_mq_complete_request() or blk_mq_end_request() for these real timeout errors, causing a double completion and use after free situation as the block layer timeout handler executes blk_mq_rq_timed_out() and __blk_mq_free_request() in blk_mq_check_expired(). This problem often triggers a NULL pointer dereference such as: BUG: kernel NULL pointer dereference, address: 0000000000000050 RIP: 0010:blk_mq_sched_mark_restart_hctx+0x5/0x20 ... Call Trace: dd_finish_request+0x56/0x80 blk_mq_free_request+0x37/0x130 null_handle_cmd+0xbf/0x250 [null_blk] ? null_queue_rq+0x67/0xd0 [null_blk] blk_mq_dispatch_rq_list+0x122/0x850 __blk_mq_do_dispatch_sched+0xbb/0x2c0 __blk_mq_sched_dispatch_requests+0x13d/0x190 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x49/0x90 process_one_work+0x26c/0x580 worker_thread+0x55/0x3c0 ? process_one_work+0x580/0x580 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x1f/0x30 This problem very often triggers when running the full btrfs xfstests on a memory-backed zoned null block device in a VM with limited amount of memory. Avoid this by executing blk_mq_complete_request() in null_timeout_rq() only for commands that are marked for a fake timeout completion using the fake_timeout boolean in struct null_cmd. For timeout errors injected through debugfs, the timeout handler will execute blk_mq_complete_request()i as before. This is safe as the submission path does not execute complete requests in this case. In null_timeout_rq(), also make sure to set the command error field to BLK_STS_TIMEOUT and to propagate this error through to the request completion. Reported-by: Johannes Thumshirn Signed-off-by: Damien Le Moal Tested-by: Johannes Thumshirn Reviewed-by: Johannes Thumshirn Link: https://lore.kernel.org/r/20210331225244.126426-1-damien.lemoal@wdc.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

gpu: host1x: Use different lock classes for each client

2021-04-16T09:43:20+00:00

[ Upstream commit a24f98176d1efae2c37d3438c57a624d530d9c33 ] To avoid false lockdep warnings, give each client lock a different lock class, passed from the initialization site by macro. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

drm/tegra: dc: Don't set PLL clock to 0Hz

2021-04-16T09:43:20+00:00

[ Upstream commit f8fb97c915954fc6de6513cdf277103b5c6df7b3 ] RGB output doesn't allow to change parent clock rate of the display and PCLK rate is set to 0Hz in this case. The tegra_dc_commit_state() shall not set the display clock to 0Hz since this change propagates to the parent clock. The DISP clock is defined as a NODIV clock by the tegra-clk driver and all NODIV clocks use the CLK_SET_RATE_PARENT flag. This bug stayed unnoticed because by default PLLP is used as the parent clock for the display controller and PLLP silently skips the erroneous 0Hz rate changes because it always has active child clocks that don't permit rate changes. The PLLP isn't acceptable for some devices that we want to upstream (like Samsung Galaxy Tab and ASUS TF700T) due to a display panel clock rate requirements that can't be fulfilled by using PLLP and then the bug pops up in this case since parent clock is set to 0Hz, killing the display output. Don't touch DC clock if pclk=0 in order to fix the problem. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

drm/imx: imx-ldb: fix out of bounds array access warning

2021-04-16T09:43:20+00:00

[ Upstream commit 33ce7f2f95cabb5834cf0906308a5cb6103976da ] When CONFIG_OF is disabled, building with 'make W=1' produces warnings about out of bounds array access: drivers/gpu/drm/imx/imx-ldb.c: In function 'imx_ldb_set_clock.constprop': drivers/gpu/drm/imx/imx-ldb.c:186:8: error: array subscript -22 is below array bounds of 'struct clk *[4]' [-Werror=array-bounds] Add an error check before the index is used, which helps with the warning, as well as any possible other error condition that may be triggered at runtime. The warning could be fixed by adding a Kconfig depedency on CONFIG_OF, but Liu Ying points out that the driver may hit the out-of-bounds problem at runtime anyway. Signed-off-by: Arnd Bergmann Reviewed-by: Liu Ying Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin

interconnect: core: fix error return code of icc_link_destroy()

2021-04-16T09:43:19+00:00

[ Upstream commit 715ea61532e731c62392221238906704e63d75b6 ] When krealloc() fails and new is NULL, no error return code of icc_link_destroy() is assigned. To fix this bug, ret is assigned with -ENOMEM hen new is NULL. Reported-by: TOTE Robot Signed-off-by: Jia-Ju Bai Link: https://lore.kernel.org/r/20210306132857.17020-1-baijiaju1990@gmail.com Signed-off-by: Georgi Djakov Signed-off-by: Sasha Levin

drivers: net: fix memory leak in peak_usb_create_dev

2021-04-14T06:42:13+00:00

commit a0b96b4a62745397aee662670cfc2157bac03f55 upstream. syzbot reported memory leak in peak_usb. The problem was in case of failure after calling ->dev_init()[2] in peak_usb_create_dev()[1]. The data allocated int dev_init() wasn't freed, so simple ->dev_free() call fix this problem. backtrace: [<0000000079d6542a>] kmalloc include/linux/slab.h:552 [inline] [<0000000079d6542a>] kzalloc include/linux/slab.h:682 [inline] [<0000000079d6542a>] pcan_usb_fd_init+0x156/0x210 drivers/net/can/usb/peak_usb/pcan_usb_fd.c:868 [2] [<00000000c09f9057>] peak_usb_create_dev drivers/net/can/usb/peak_usb/pcan_usb_core.c:851 [inline] [1] [<00000000c09f9057>] peak_usb_probe+0x389/0x490 drivers/net/can/usb/peak_usb/pcan_usb_core.c:949 Reported-by: syzbot+91adee8d9ebb9193d22d@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

drivers: net: fix memory leak in atusb_probe

2021-04-14T06:42:13+00:00

commit 6b9fbe16955152626557ec6f439f3407b7769941 upstream. syzbot reported memory leak in atusb_probe()[1]. The problem was in atusb_alloc_urbs(). Since urb is anchored, we need to release the reference to correctly free the urb backtrace: [] kmalloc include/linux/slab.h:559 [inline] [] usb_alloc_urb+0x66/0xe0 drivers/usb/core/urb.c:74 [] atusb_alloc_urbs drivers/net/ieee802154/atusb.c:362 [inline][2] [] atusb_probe+0x158/0x820 drivers/net/ieee802154/atusb.c:1038 [1] Reported-by: syzbot+28a246747e0a465127f3@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman