kernel/linux.git/drivers, branch v5.10.22

r8169: fix resuming from suspend on RTL8105e if machine runs on battery

2021-03-09T10:11:15+00:00

commit d2a04370817fc7b0172dad2ef2decf907e1a304e upstream. Armin reported that after referenced commit his RTL8105e is dead when resuming from suspend and machine runs on battery. This patch has been confirmed to fix the issue. Fixes: e80bd76fbf56 ("r8169: work around power-saving bug on some chip versions") Reported-by: Armin Wolf Tested-by: Armin Wolf Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

of: unittest: Fix build on architectures without CONFIG_OF_ADDRESS

2021-03-09T10:11:15+00:00

commit aed5041ef9a3f594ed9dc0bb5ee7e1bbccfd3366 upstream. of_dma_get_max_cpu_address() is not defined if !CONFIG_OF_ADDRESS, so return early in of_unittest_dma_get_max_cpu_address(). Fixes: 07d13a1d6120 ("of: unittest: Add test for of_dma_get_max_cpu_address()") Reported-by: kernel test robot Signed-off-by: Catalin Marinas Cc: Jing Xiangfeng Signed-off-by: Greg Kroah-Hartman

iommu/vt-d: Fix status code for Allocate/Free PASID command

2021-03-09T10:11:15+00:00

[ Upstream commit 444d66a23c1f1e4c4d12aed4812681d0ad835d60 ] As per Intel vt-d spec, Rev 3.0 (section 10.4.45 "Virtual Command Response Register"), the status code of "No PASID available" error in response to the Allocate PASID command is 2, not 1. The same for "Invalid PASID" error in response to the Free PASID command. We will otherwise see confusing kernel log under the command failure from guest side. Fix it. Fixes: 24f27d32ab6b ("iommu/vt-d: Enlightened PASID allocation") Signed-off-by: Zenghui Yu Acked-by: Lu Baolu Link: https://lore.kernel.org/r/20210227073909.432-1-yuzenghui@huawei.com Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin

rsxx: Return -EFAULT if copy_to_user() fails

2021-03-09T10:11:15+00:00

[ Upstream commit 77516d25f54912a7baedeeac1b1b828b6f285152 ] The copy_to_user() function returns the number of bytes remaining but we want to return -EFAULT to the user if it can't complete the copy. The "st" variable only holds zero on success or negative error codes on failure so the type should be int. Fixes: 36f988e978f8 ("rsxx: Adding in debugfs entries.") Signed-off-by: Dan Carpenter Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

IB/mlx5: Add missing error code

2021-03-09T10:11:14+00:00

[ Upstream commit 3a9b3d4536e0c25bd3906a28c1f584177e49dd0f ] Set err to -ENOMEM if kzalloc fails instead of 0. Fixes: 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX") Link: https://lore.kernel.org/r/20210222122343.19720-1-yuehaibing@huawei.com Signed-off-by: YueHaibing Acked-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

RDMA/rxe: Fix missing kconfig dependency on CRYPTO

2021-03-09T10:11:14+00:00

[ Upstream commit 475f23b8c66d2892ad6acbf90ed757cafab13de7 ] When RDMA_RXE is enabled and CRYPTO is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for CRYPTO_CRC32 Depends on [n]: CRYPTO [=n] Selected by [y]: - RDMA_RXE [=y] && (INFINIBAND_USER_ACCESS [=y] || !INFINIBAND_USER_ACCESS [=y]) && INET [=y] && PCI [=y] && INFINIBAND [=y] && INFINIBAND_VIRT_DMA [=y] This is because RDMA_RXE selects CRYPTO_CRC32, without depending on or selecting CRYPTO, despite that config option being subordinate to CRYPTO. Fixes: cee2688e3cd6 ("IB/rxe: Offload CRC calculation when possible") Signed-off-by: Julian Braha Link: https://lore.kernel.org/r/21525878.NYvzQUHefP@ubuntu-mate-laptop Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep

2021-03-09T10:11:14+00:00

[ Upstream commit 221384df6123747d2a75517dd06cc01752f81518 ] ib_send_cm_sidr_rep() { spin_lock_irqsave() cm_send_sidr_rep_locked() { ... spin_lock_irq() .... spin_unlock_irq() <--- this will enable interrupts } spin_unlock_irqrestore() } spin_unlock_irqrestore() expects interrupts to be disabled but the internal spin_unlock_irq() will always enable hard interrupts. Fix this by replacing the internal spin_{lock,unlock}_irq() with irqsave/restore variants. It fixes the following kernel trace: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 2 PID: 20001 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x1d/0x20 Call Trace: _raw_spin_unlock_irqrestore+0x4e/0x50 ib_send_cm_sidr_rep+0x3a/0x50 [ib_cm] cma_send_sidr_rep+0xa1/0x160 [rdma_cm] rdma_accept+0x25e/0x350 [rdma_cm] ucma_accept+0x132/0x1cc [rdma_ucm] ucma_write+0xbf/0x140 [rdma_ucm] vfs_write+0xc1/0x340 ksys_write+0xb3/0xe0 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 87c4c774cbef ("RDMA/cm: Protect access to remote_sidr_table") Link: https://lore.kernel.org/r/20210301081844.445823-1-leon@kernel.org Signed-off-by: Saeed Mahameed Reviewed-by: Jason Gunthorpe Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

arm64: mm: Set ZONE_DMA size based on early IORT scan

2021-03-09T10:11:13+00:00

commit 2b8652936f0ca9ca2e6c984ae76c7bfcda1b3f22 upstream We recently introduced a 1 GB sized ZONE_DMA to cater for platforms incorporating masters that can address less than 32 bits of DMA, in particular the Raspberry Pi 4, which has 4 or 8 GB of DRAM, but has peripherals that can only address up to 1 GB (and its PCIe host bridge can only access the bottom 3 GB) Instructing the DMA layer about these limitations is straight-forward, even though we had to fix some issues regarding memory limits set in the IORT for named components, and regarding the handling of ACPI _DMA methods. However, the DMA layer also needs to be able to allocate memory that is guaranteed to meet those DMA constraints, for bounce buffering as well as allocating the backing for consistent mappings. This is why the 1 GB ZONE_DMA was introduced recently. Unfortunately, it turns out the having a 1 GB ZONE_DMA as well as a ZONE_DMA32 causes problems with kdump, and potentially in other places where allocations cannot cross zone boundaries. Therefore, we should avoid having two separate DMA zones when possible. So let's do an early scan of the IORT, and only create the ZONE_DMA if we encounter any devices that need it. This puts the burden on the firmware to describe such limitations in the IORT, which may be redundant (and less precise) if _DMA methods are also being provided. However, it should be noted that this situation is highly unusual for arm64 ACPI machines. Also, the DMA subsystem still gives precedence to the _DMA method if implemented, and so we will not lose the ability to perform streaming DMA outside the ZONE_DMA if the _DMA method permits it. [nsaenz: unified implementation with DT's counterpart] Signed-off-by: Ard Biesheuvel Signed-off-by: Nicolas Saenz Julienne Tested-by: Jeremy Linton Acked-by: Lorenzo Pieralisi Acked-by: Hanjun Guo Cc: Jeremy Linton Cc: Lorenzo Pieralisi Cc: Nicolas Saenz Julienne Cc: Rob Herring Cc: Christoph Hellwig Cc: Robin Murphy Cc: Hanjun Guo Cc: Sudeep Holla Cc: Anshuman Khandual Link: https://lore.kernel.org/r/20201119175400.9995-7-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas Cc: Signed-off-by: Jing Xiangfeng Signed-off-by: Greg Kroah-Hartman

of: unittest: Add test for of_dma_get_max_cpu_address()

2021-03-09T10:11:13+00:00

commit 07d13a1d6120d453c3c1f020578693d072deded5 upstream Introduce a test for of_dma_get_max_cup_address(), it uses the same DT data as the rest of dma-ranges unit tests. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20201119175400.9995-5-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas Cc: Signed-off-by: Jing Xiangfeng Signed-off-by: Greg Kroah-Hartman

of/address: Introduce of_dma_get_max_cpu_address()

2021-03-09T10:11:13+00:00

commit 964db79d6c186cc2ecc6ae46f98eed7e0ea8cf71 upstream Introduce of_dma_get_max_cpu_address(), which provides the highest CPU physical address addressable by all DMA masters in the system. It's specially useful for setting memory zones sizes at early boot time. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20201119175400.9995-4-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas Cc: Signed-off-by: Jing Xiangfeng Signed-off-by: Greg Kroah-Hartman