kernel/linux.git/drivers, branch v4.9.79

tun: fix a memory leak for tfile->tx_array

2018-01-31T11:55:56+00:00

[ Upstream commit 4df0bfc79904b7169dc77dcce44598b1545721f9 ] tfile->tun could be detached before we close the tun fd, via tun_detach_all(), so it should not be used to check for tfile->tx_array. As Jason suggested, we probably have to clean it up unconditionally both in __tun_deatch() and tun_detach_all(), but this requires to check if it is initialized or not. Currently skb_array_cleanup() doesn't have such a check, so I check it in the caller and introduce a helper function, it is a bit ugly but we can always improve it in net-next. Reported-by: Dmitry Vyukov Fixes: 1576d9860599 ("tun: switch to use skb array for tx") Cc: Jason Wang Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

mlxsw: spectrum_router: Don't log an error on missing neighbor

2018-01-31T11:55:55+00:00

[ Upstream commit 1ecdaea02ca6bfacf2ecda500dc1af51e9780c42 ] Driver periodically samples all neighbors configured in device in order to update the kernel regarding their state. When finding an entry configured in HW that doesn't show in neigh_lookup() driver logs an error message. This introduces a race when removing multiple neighbors - it's possible that a given entry would still be configured in HW as its removal is still being processed but is already removed from the kernel's neighbor tables. Simply remove the error message and gracefully accept such events. Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Fixes: 60f040ca11b9 ("mlxsw: spectrum_router: Periodically dump active IPv6 neighbours") Signed-off-by: Yuval Mintz Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

be2net: restore properly promisc mode after queues reconfiguration

2018-01-31T11:55:55+00:00

[ Upstream commit 52acf06451930eb4cefabd5ecea56e2d46c32f76 ] The commit 622190669403 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") modified be_update_queues() so the IFACE (HW representation of the netdevice) is destroyed and then re-created. This causes a regression because potential promiscuous mode is not restored properly during be_open() because the driver thinks that the HW has promiscuous mode already enabled. Note that Lancer is not affected by this bug because RX-filter flags are disabled during be_close() for this chipset. Cc: Sathya Perla Cc: Ajit Khaparde Cc: Sriharsha Basavapatna Cc: Somnath Kotur Fixes: 622190669403 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ppp: unlock all_ppp_mutex before registering device

2018-01-31T11:55:55+00:00

[ Upstream commit 0171c41835591e9aa2e384b703ef9a6ae367c610 ] ppp_dev_uninit(), which is the .ndo_uninit() handler of PPP devices, needs to lock pn->all_ppp_mutex. Therefore we mustn't call register_netdevice() with pn->all_ppp_mutex already locked, or we'd deadlock in case register_netdevice() fails and calls .ndo_uninit(). Fortunately, we can unlock pn->all_ppp_mutex before calling register_netdevice(). This lock protects pn->units_idr, which isn't used in the device registration process. However, keeping pn->all_ppp_mutex locked during device registration did ensure that no device in transient state would be published in pn->units_idr. In practice, unlocking it before calling register_netdevice() doesn't change this property: ppp_unit_register() is called with 'ppp_mutex' locked and all searches done in pn->units_idr hold this lock too. Fixes: 8cb775bc0a34 ("ppp: fix device unregistration upon netns deletion") Reported-and-tested-by: syzbot+367889b9c9e279219175@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vmxnet3: repair memory leak

2018-01-31T11:55:55+00:00

[ Upstream commit 848b159835ddef99cc4193083f7e786c3992f580 ] with the introduction of commit b0eb57cb97e7837ebb746404c2c58c6f536f23fa, it appears that rq->buf_info is improperly handled. While it is heap allocated when an rx queue is setup, and freed when torn down, an old line of code in vmxnet3_rq_destroy was not properly removed, leading to rq->buf_info[0] being set to NULL prior to its being freed, causing a memory leak, which eventually exhausts the system on repeated create/destroy operations (for example, when the mtu of a vmxnet3 interface is changed frequently. Fix is pretty straight forward, just move the NULL set to after the free. Tested by myself with successful results Applies to net, and should likely be queued for stable, please Signed-off-by: Neil Horman Reported-By: boyang@redhat.com CC: boyang@redhat.com CC: Shrikrishna Khare CC: "VMware, Inc." CC: David S. Miller Acked-by: Shrikrishna Khare Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

r8169: fix memory corruption on retrieval of hardware statistics.

2018-01-31T11:55:54+00:00

[ Upstream commit a78e93661c5fd30b9e1dee464b2f62f966883ef7 ] Hardware statistics retrieval hurts in tight invocation loops. Avoid extraneous write and enforce strict ordering of writes targeted to the tally counters dump area address registers. Signed-off-by: Francois Romieu Tested-by: Oliver Freyermuth Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

pppoe: take ->needed_headroom of lower device into account on xmit

2018-01-31T11:55:54+00:00

[ Upstream commit 02612bb05e51df8489db5e94d0cf8d1c81f87b0c ] In pppoe_sendmsg(), reserving dev->hard_header_len bytes of headroom was probably fine before the introduction of ->needed_headroom in commit f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom"). But now, virtual devices typically advertise the size of their overhead in dev->needed_headroom, so we must also take it into account in skb_reserve(). Allocation size of skb is also updated to take dev->needed_tailroom into account and replace the arbitrary 32 bytes with the real size of a PPPoE header. This issue was discovered by syzbot, who connected a pppoe socket to a gre device which had dev->header_ops->create == ipgre_header and dev->hard_header_len == 0. Therefore, PPPoE didn't reserve any headroom, and dev_hard_header() crashed when ipgre_header() tried to prepend its header to skb->data. skbuff: skb_under_panic: text:000000001d390b3a len:31 put:24 head:00000000d8ed776f data:000000008150e823 tail:0x7 end:0xc0 dev:gre0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 3670 Comm: syzkaller801466 Not tainted 4.15.0-rc7-next-20180115+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x162/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801d9bd7840 EFLAGS: 00010282 RAX: 0000000000000083 RBX: ffff8801d4f083c0 RCX: 0000000000000000 RDX: 0000000000000083 RSI: 1ffff1003b37ae92 RDI: ffffed003b37aefc RBP: ffff8801d9bd78a8 R08: 1ffff1003b37ae8a R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff86200de0 R13: ffffffff84a981ad R14: 0000000000000018 R15: ffff8801d2d34180 FS: 00000000019c4880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000208bc000 CR3: 00000001d9111001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: skb_under_panic net/core/skbuff.c:114 [inline] skb_push+0xce/0xf0 net/core/skbuff.c:1714 ipgre_header+0x6d/0x4e0 net/ipv4/ip_gre.c:879 dev_hard_header include/linux/netdevice.h:2723 [inline] pppoe_sendmsg+0x58e/0x8b0 drivers/net/ppp/pppoe.c:890 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 sock_write_iter+0x31a/0x5d0 net/socket.c:909 call_write_iter include/linux/fs.h:1775 [inline] do_iter_readv_writev+0x525/0x7f0 fs/read_write.c:653 do_iter_write+0x154/0x540 fs/read_write.c:932 vfs_writev+0x18a/0x340 fs/read_write.c:977 do_writev+0xfc/0x2a0 fs/read_write.c:1012 SYSC_writev fs/read_write.c:1085 [inline] SyS_writev+0x27/0x30 fs/read_write.c:1082 entry_SYSCALL_64_fastpath+0x29/0xa0 Admittedly PPPoE shouldn't be allowed to run on non Ethernet-like interfaces, but reserving space for ->needed_headroom is a more fundamental issue that needs to be addressed first. Same problem exists for __pppoe_xmit(), which also needs to take dev->needed_headroom into account in skb_cow_head(). Fixes: f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom") Reported-by: syzbot+ed0838d0fa4c4f2b528e20286e6dc63effc7c14d@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault Reviewed-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

lan78xx: Fix failure in USB Full Speed

2018-01-31T11:55:54+00:00

[ Upstream commit a5b1379afbfabf91e3a689e82ac619a7157336b3 ] Fix initialize the uninitialized tx_qlen to an appropriate value when USB Full Speed is used. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Yuiko Oshino Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

Input: trackpoint - force 3 buttons if 0 button is reported

2018-01-31T11:55:53+00:00

commit f5d07b9e98022d50720e38aa936fc11c67868ece upstream. Lenovo introduced trackpoint compatible sticks with minimum PS/2 commands. They supposed to reply with 0x02, 0x03, or 0x04 in response to the "Read Extended ID" command, so we would know not to try certain extended commands. Unfortunately even some trackpoints reporting the original IBM version (0x01 firmware 0x0e) now respond with incorrect data to the "Get Extended Buttons" command: thinkpad_acpi: ThinkPad BIOS R0DET87W (1.87 ), EC unknown thinkpad_acpi: Lenovo ThinkPad E470, model 20H1004SGE psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 0/0 Since there are no trackpoints without buttons, let's assume the trackpoint has 3 buttons when we get 0 response to the extended buttons query. Signed-off-by: Aaron Ma Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196253 Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

scsi: libiscsi: fix shifting of DID_REQUEUE host byte

2018-01-31T11:55:52+00:00

commit eef9ffdf9cd39b2986367bc8395e2772bc1284ba upstream. The SCSI host byte should be shifted left by 16 in order to have scsi_decide_disposition() do the right thing (.i.e. requeue the command). Signed-off-by: Johannes Thumshirn Fixes: 661134ad3765 ("[SCSI] libiscsi, bnx2i: make bound ep check common") Cc: Lee Duncan Cc: Hannes Reinecke Cc: Bart Van Assche Cc: Chris Leech Acked-by: Lee Duncan Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman