kernel/linux.git/drivers, branch v4.9.303

net: usb: qmi_wwan: Add support for Dell DW5829e

2022-02-23T10:56:41+00:00

[ Upstream commit 8ecbb179286cbc91810c16caeb3396e06305cd0c ] Dell DW5829e same as DW5821e except the CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. Also, DW5829e includes normal and eSIM type. Please see below test evidence: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Slark Xiao Acked-by: Bjørn Mork Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ata: libata-core: Disable TRIM on M88V29

2022-02-23T10:56:41+00:00

[ Upstream commit c8ea23d5fa59f28302d4e3370c75d9c308e64410 ] This device is a CF card, or possibly an SSD in CF form factor. It supports NCQ and high speed DMA. While it also advertises TRIM support, I/O errors are reported when the discard mount option fstrim is used. TRIM also fails when disabling NCQ and not just as an NCQ command. TRIM must be disabled for this device. Signed-off-by: Zoltán Böszörményi Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

i2c: brcmstb: fix support for DSL and CM variants

2022-02-23T10:56:41+00:00

commit 834cea3a252ed4847db076a769ad9efe06afe2d5 upstream. DSL and CM (Cable Modem) support 8 B max transfer size and have a custom DT binding for that reason. This driver was checking for a wrong "compatible" however which resulted in an incorrect setup. Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs") Signed-off-by: Rafał Miłecki Acked-by: Florian Fainelli Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

EDAC: Fix calculation of returned address and next offset in edac_align_ptr()

2022-02-23T10:56:41+00:00

commit f8efca92ae509c25e0a4bd5d0a86decea4f0c41e upstream. Do alignment logic properly and use the "ptr" local variable for calculating the remainder of the alignment. This became an issue because struct edac_mc_layer has a size that is not zero modulo eight, and the next offset that was prepared for the private data was unaligned, causing an alignment exception. The patch in Fixes: which broke this actually wanted to "what we actually care about is the alignment of the actual pointer that's about to be returned." But it didn't check that alignment. Use the correct variable "ptr" for that. [ bp: Massage commit message. ] Fixes: 8447c4d15e35 ("edac: Do alignment logic properly in edac_align_ptr()") Signed-off-by: Eliav Farber Signed-off-by: Borislav Petkov Cc: Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com Signed-off-by: Greg Kroah-Hartman

iwlwifi: pcie: fix locking when "HW not ready"

2022-02-23T10:56:40+00:00

commit e9848aed147708a06193b40d78493b0ef6abccf2 upstream. If we run into this error path, we shouldn't unlock the mutex since it's not locked since. Fix this. Fixes: a6bd005fe92d ("iwlwifi: pcie: fix RF-Kill vs. firmware load race") Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf9806459856d6aefbdbe54477aecffd@changeid Signed-off-by: Greg Kroah-Hartman

drm/radeon: Fix backlight control on iMac 12,1

2022-02-23T10:56:40+00:00

commit 364438fd629f7611a84c8e6d7de91659300f1502 upstream. The iMac 12,1 does not use the gmux driver for backlight, so the radeon backlight device is needed to set the brightness. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1838 Signed-off-by: Nicholas Bishop Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

net: ieee802154: at86rf230: Stop leaking skb's

2022-02-23T10:56:39+00:00

[ Upstream commit e5ce576d45bf72fd0e3dc37eff897bfcc488f6a9 ] Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. In the Tx case we then leak the skb structure. Free the skb structure upon error before returning when appropriate. As the 'is_tx = 0' cannot be moved in the complete handler because of a possible race between the delay in switching to STATE_RX_AACK_ON and a new interrupt, we introduce an intermediate 'was_tx' boolean just for this purpose. There is no Fixes tag applying here, many changes have been made on this area and the issue kind of always existed. Suggested-by: Alexander Aring Signed-off-by: Miquel Raynal Acked-by: Alexander Aring Link: https://lore.kernel.org/r/20220125121426.848337-4-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt Signed-off-by: Sasha Levin

parisc: Fix sglist access in ccio-dma.c

2022-02-23T10:56:39+00:00

commit d7da660cab47183cded65e11b64497d0f56c6edf upstream. This patch implements the same bug fix to ccio-dma.c as to sba_iommu.c. It ensures that only the allocated entries of the sglist are accessed. Signed-off-by: John David Anglin Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

parisc: Fix data TLB miss in sba_unmap_sg

2022-02-23T10:56:39+00:00

commit b7d6f44a0fa716a82969725516dc0b16bc7cd514 upstream. Rolf Eike Beer reported the following bug: [1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018 [1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4 [1274934.746891] Hardware name: 9000/785/C8000 [1274934.746891] [1274934.746891] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [1274934.746891] PSW: 00001000000001001111111000001110 Not tainted [1274934.746891] r00-03 000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000 [1274934.746891] r04-07 0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001 [1274934.746891] r08-11 0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001 [1274934.746891] r12-15 0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0 [1274934.746891] r16-19 0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007 [1274934.746891] r20-23 0000000000000006 000000004a368950 0000000000000000 0000000000000001 [1274934.746891] r24-27 0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0 [1274934.746891] r28-31 0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118 [1274934.746891] sr00-03 00000000066e5800 0000000000000000 0000000000000000 00000000066e5800 [1274934.746891] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [1274934.746891] [1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec [1274934.746891] IIR: 48780030 ISR: 0000000000000000 IOR: 0000004140000018 [1274934.746891] CPU: 3 CR30: 00000040e3a9c000 CR31: ffffffffffffffff [1274934.746891] ORIG_R28: 0000000040acdd58 [1274934.746891] IAOQ[0]: sba_unmap_sg+0xb0/0x118 [1274934.746891] IAOQ[1]: sba_unmap_sg+0xb4/0x118 [1274934.746891] RP(r2): sba_unmap_sg+0xac/0x118 [1274934.746891] Backtrace: [1274934.746891] [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70 [1274934.746891] [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60 [1274934.746891] [<00000000407a3488>] mptscsih_io_done+0x150/0xd70 [1274934.746891] [<0000000040798600>] mpt_interrupt+0x168/0xa68 [1274934.746891] [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278 [1274934.746891] [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8 [1274934.746891] [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0 [1274934.746891] [<00000000402548e0>] generic_handle_irq+0x50/0x70 [1274934.746891] [<000000004019a254>] call_on_stack+0x18/0x24 [1274934.746891] [1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?) The bug is caused by overrunning the sglist and incorrectly testing sg_dma_len(sglist) before nents. Normally this doesn't cause a crash, but in this case sglist crossed a page boundary. This occurs in the following code: while (sg_dma_len(sglist) && nents--) { The fix is simply to test nents first and move the decrement of nents into the loop. Reported-by: Rolf Eike Beer Signed-off-by: John David Anglin Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

serial: parisc: GSC: fix build when IOSAPIC is not set

2022-02-23T10:56:39+00:00

commit 6e8793674bb0d1135ca0e5c9f7e16fecbf815926 upstream. There is a build error when using a kernel .config file from 'kernel test robot' for a different build problem: hppa64-linux-ld: drivers/tty/serial/8250/8250_gsc.o: in function `.LC3': (.data.rel.ro+0x18): undefined reference to `iosapic_serial_irq' when: CONFIG_GSC=y CONFIG_SERIO_GSCPS2=y CONFIG_SERIAL_8250_GSC=y CONFIG_PCI is not set and hence PCI_LBA is not set. IOSAPIC depends on PCI_LBA, so IOSAPIC is not set/enabled. Make the use of iosapic_serial_irq() conditional to fix the build error. Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: linux-parisc@vger.kernel.org Cc: Greg Kroah-Hartman Cc: linux-serial@vger.kernel.org Cc: Jiri Slaby Cc: Johan Hovold Suggested-by: Helge Deller Signed-off-by: Helge Deller Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman