kernel/linux.git/drivers, branch v4.9.254

net: dsa: b53: fix an off by one in checking "vlan->vid"

2021-01-30T12:27:16+00:00

commit 8e4052c32d6b4b39c1e13c652c7e33748d447409 upstream. The > comparison should be >= to prevent accessing one element beyond the end of the dev->vlans[] array in the caller function, b53_vlan_add(). The "dev->vlans" array is allocated in the b53_switch_init() function and it has "dev->num_vlans" elements. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Dan Carpenter Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

sh_eth: Fix power down vs. is_opened flag ordering

2021-01-30T12:27:15+00:00

commit f6a2e94b3f9d89cb40771ff746b16b5687650cbb upstream. sh_eth_close() does a synchronous power down of the device before marking it closed. Revert the order, to make sure the device is never marked opened while suspended. While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as there is no reason to do a synchronous power down. Fixes: 7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context") Signed-off-by: Geert Uytterhoeven Reviewed-by: Sergei Shtylyov Reviewed-by: Niklas Söderlund Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

xhci: tegra: Delay for disabling LFPS detector

2021-01-30T12:27:15+00:00

commit da7e0c3c2909a3d9bf8acfe1db3cb213bd7febfb upstream. Occasionally, we are seeing some SuperSpeed devices resumes right after being directed to U3. This commits add 500us delay to ensure LFPS detector is disabled before sending ACK to firmware. [ 16.099363] tegra-xusb 70090000.usb: entering ELPG [ 16.104343] tegra-xusb 70090000.usb: 2-1 isn't suspended: 0x0c001203 [ 16.114576] tegra-xusb 70090000.usb: not all ports suspended: -16 [ 16.120789] tegra-xusb 70090000.usb: entering ELPG failed The register write passes through a few flop stages of 32KHz clock domain. NVIDIA ASIC designer reviewed RTL and suggests 500us delay. Cc: stable@vger.kernel.org Signed-off-by: JC Kuo Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20210115161907.2875631-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: make sure TRB is fully written before giving it to the controller

2021-01-30T12:27:15+00:00

commit 576667bad341516edc4e18eb85acb0a2b4c9c9d9 upstream. Once the command ring doorbell is rung the xHC controller will parse all command TRBs on the command ring that have the cycle bit set properly. If the driver just started writing the next command TRB to the ring when hardware finished the previous TRB, then HW might fetch an incomplete TRB as long as its cycle bit set correctly. A command TRB is 16 bytes (128 bits) long. Driver writes the command TRB in four 32 bit chunks, with the chunk containing the cycle bit last. This does however not guarantee that chunks actually get written in that order. This was detected in stress testing when canceling URBs with several connected USB devices. Two consecutive "Set TR Dequeue pointer" commands got queued right after each other, and the second one was only partially written when the controller parsed it, causing the dequeue pointer to be set to bogus values. This was seen as error messages: "Mismatch between completed Set TR Deq Ptr command & xHCI internal state" Solution is to add a write memory barrier before writing the cycle bit. Cc: Tested-by: Ross Zwisler Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20210115161907.2875631-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: bdc: Make bdc pci driver depend on BROKEN

2021-01-30T12:27:15+00:00

commit ef02684c4e67d8c35ac83083564135bc7b1d3445 upstream. The bdc pci driver is going to be removed due to it not existing in the wild. This patch turns off compilation of the driver so that stable kernels can also pick up the change. This helps the out-of-tree facetimehd webcam driver as the pci id conflicts with bdc. Cc: Al Cooper Cc: Acked-by: Felipe Balbi Signed-off-by: Patrik Jakobsson Link: https://lore.kernel.org/r/20210118203615.13995-1-patrik.r.jakobsson@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: udc: core: Use lock when write to soft_connect

2021-01-30T12:27:15+00:00

commit c28095bc99073ddda65e4f31f6ae0d908d4d5cd8 upstream. Use lock to guard against concurrent access for soft-connect/disconnect operations when writing to soft_connect sysfs. Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class") Cc: stable@vger.kernel.org Acked-by: Felipe Balbi Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/338ea01fbd69b1985ef58f0f59af02c805ddf189.1610611437.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman

USB: ehci: fix an interrupt calltrace error

2021-01-30T12:27:15+00:00

commit 643a4df7fe3f6831d14536fd692be85f92670a52 upstream. The system that use Synopsys USB host controllers goes to suspend when using USB audio player. This causes the USB host controller continuous send interrupt signal to system, When the number of interrupts exceeds 100000, the system will forcibly close the interrupts and output a calltrace error. When the system goes to suspend, the last interrupt is reported to the driver. At this time, the system has set the state to suspend. This causes the last interrupt to not be processed by the system and not clear the interrupt flag. This uncleared interrupt flag constantly triggers new interrupt event. This causing the driver to receive more than 100,000 interrupts, which causes the system to forcibly close the interrupt report and report the calltrace error. so, when the driver goes to sleep and changes the system state to suspend, the interrupt flag needs to be cleared. Signed-off-by: Longfang Liu Acked-by: Alan Stern Link: https://lore.kernel.org/r/1610416647-45774-1-git-send-email-liulongfang@huawei.com Cc: stable Signed-off-by: Greg Kroah-Hartman

ehci: fix EHCI host controller initialization sequence

2021-01-30T12:27:15+00:00

commit 280a9045bb18833db921b316a5527d2b565e9f2e upstream. According to EHCI spec, EHCI HC clears USBSTS.HCHalted whenever USBCMD.RS=1. However, it is a good practice to wait some time after setting USBCMD.RS (approximately 100ms) until USBSTS.HCHalted become zero. Without this waiting, VirtualBox's EHCI virtual HC accidentally hangs (see BugLink). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211095 Acked-by: Alan Stern Signed-off-by: Eugene Korenevsky Cc: stable Link: https://lore.kernel.org/r/20210110173609.GA17313@himera.home Signed-off-by: Greg Kroah-Hartman

stm class: Fix module init return on allocation failure

2021-01-30T12:27:14+00:00

commit 927633a6d20af319d986f3e42c3ef9f6d7835008 upstream. In stm_heartbeat_init(): return value gets reset after the first iteration by stm_source_register_device(), so allocation failures after that will, after a clean up, return success. Fix that. Fixes: 119291853038 ("stm class: Add heartbeat stm source device") Reported-by: Hulk Robot Signed-off-by: Wang Hui Signed-off-by: Alexander Shishkin Link: https://lore.kernel.org/r/20210115195917.3184-2-alexander.shishkin@linux.intel.com Cc: stable Signed-off-by: Greg Kroah-Hartman

iio: ad5504: Fix setting power-down state

2021-01-30T12:27:14+00:00

commit efd597b2839a9895e8a98fcb0b76d2f545802cd4 upstream. The power-down mask of the ad5504 is actually a power-up mask. Meaning if a bit is set the corresponding channel is powered up and if it is not set the channel is powered down. The driver currently has this the wrong way around, resulting in the channel being powered up when requested to be powered down and vice versa. Fixes: 3bbbf150ffde ("staging:iio:dac:ad5504: Use strtobool for boolean values") Signed-off-by: Lars-Peter Clausen Acked-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20201209104649.5794-1-lars@metafoo.de Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman