kernel/linux.git/drivers, branch v4.9.223

net: systemport: suppress warnings on failed Rx SKB allocations

2020-05-10T08:28:02+00:00

[ Upstream commit 3554e54a46125030c534820c297ed7f6c3907e24 ] The driver is designed to drop Rx packets and reclaim the buffers when an allocation fails, and the network interface needs to safely handle this packet loss. Therefore, an allocation failure of Rx SKBs is relatively benign. However, the output of the warning message occurs with a high scheduling priority that can cause excessive jitter/latency for other high priority processing. This commit suppresses the warning messages to prevent scheduling problems while retaining the failure count in the statistics of the network interface. Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: bcmgenet: suppress warnings on failed Rx SKB allocations

2020-05-10T08:28:02+00:00

[ Upstream commit ecaeceb8a8a145d93c7e136f170238229165348f ] The driver is designed to drop Rx packets and reclaim the buffers when an allocation fails, and the network interface needs to safely handle this packet loss. Therefore, an allocation failure of Rx SKBs is relatively benign. However, the output of the warning message occurs with a high scheduling priority that can cause excessive jitter/latency for other high priority processing. This commit suppresses the warning messages to prevent scheduling problems while retaining the failure count in the statistics of the network interface. Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: b53: Rework ARL bin logic

2020-05-10T08:28:02+00:00

[ Upstream commit 6344dbde6a27d10d16246d734b968f84887841e2 ] When asking the ARL to read a MAC address, we will get a number of bins returned in a single read. Out of those bins, there can essentially be 3 states: - all bins are full, we have no space left, and we can either replace an existing address or return that full condition - the MAC address was found, then we need to return its bin index and modify that one, and only that one - the MAC address was not found and we have a least one bin free, we use that bin index location then The code would unfortunately fail on all counts. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: stmmac: Fix sub-second increment

2020-05-10T08:28:01+00:00

[ Upstream commit 91a2559c1dc5b0f7e1256d42b1508935e8eabfbf ] In fine adjustement mode, which is the current default, the sub-second increment register is the number of nanoseconds that will be added to the clock when the accumulator overflows. At each clock cycle, the value of the addend register is added to the accumulator. Currently, we use 20ns = 1e09ns / 50MHz as this value whatever the frequency of the ptp clock actually is. The adjustment is then done on the addend register, only incrementing every X clock cycles X being the ratio between 50MHz and ptp_clock_rate (addend = 2^32 * 50MHz/ptp_clock_rate). This causes the following issues : - In case the frequency of the ptp clock is inferior or equal to 50MHz, the addend value calculation will overflow and the default addend value will be set to 0, causing the clock to not work at all. (For instance, for ptp_clock_rate = 50MHz, addend = 2^32). - The resolution of the timestamping clock is limited to 20ns while it is not needed, thus limiting the accuracy of the timestamping to 20ns. Fix this by setting sub-second increment to 2e09ns / ptp_clock_rate. It will allow to reach the minimum possible frequency for ptp_clk_ref, which is 5MHz for GMII 1000Mps Full-Duplex by setting the sub-second-increment to a higher value. For instance, for 25MHz, it gives ssinc = 80ns and default_addend = 2^31. It will also allow to use a lower value for sub-second-increment, thus improving the timestamping accuracy with frequencies higher than 100MHz, for instance, for 200MHz, ssinc = 10ns and default_addend = 2^31. v1->v2: - Remove modifications to the calculation of default addend, which broke compatibility with clock frequencies for which 2000000000 / ptp_clk_freq is not an integer. - Modify description according to discussions. Signed-off-by: Julien Beraud Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

wimax/i2400m: Fix potential urb refcnt leak

2020-05-10T08:28:01+00:00

[ Upstream commit 7717cbec172c3554d470023b4020d5781961187e ] i2400mu_bus_bm_wait_for_ack() invokes usb_get_urb(), which increases the refcount of the "notif_urb". When i2400mu_bus_bm_wait_for_ack() returns, local variable "notif_urb" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in all paths of i2400mu_bus_bm_wait_for_ack(), which forget to decrease the refcnt increased by usb_get_urb(), causing a refcnt leak. Fix this issue by calling usb_put_urb() before the i2400mu_bus_bm_wait_for_ack() returns. Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

iio:ad7797: Use correct attribute_group

2020-05-10T08:28:00+00:00

[ Upstream commit 28535877ac5b2b84f0d394fd67a5ec71c0c48b10 ] It should use ad7797_attribute_group in ad7797_info, according to commit ("iio:ad7793: Add support for the ad7796 and ad7797"). Scale is fixed for the ad7796 and not programmable, hence should not have the scale_available attribute. Fixes: fd1a8b912841 ("iio:ad7793: Add support for the ad7796 and ad7797") Signed-off-by: YueHaibing Reviewed-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

vhost: vsock: kick send_pkt worker once device is started

2020-05-10T08:28:00+00:00

commit 0b841030625cde5f784dd62aec72d6a766faae70 upstream. Ning Bo reported an abnormal 2-second gap when booting Kata container [1]. The unconditional timeout was caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of connecting from the client side. The vhost vsock client tries to connect an initializing virtio vsock server. The abnormal flow looks like: host-userspace vhost vsock guest vsock ============== =========== ============ connect() --------> vhost_transport_send_pkt_work() initializing | vq->private_data==NULL | will not be queued V schedule_timeout(2s) vhost_vsock_start() <--------- device ready set vq->private_data wait for 2s and failed connect() again vq->private_data!=NULL recv connecting pkt Details: 1. Host userspace sends a connect pkt, at that time, guest vsock is under initializing, hence the vhost_vsock_start has not been called. So vq->private_data==NULL, and the pkt is not been queued to send to guest 2. Then it sleeps for 2s 3. After guest vsock finishes initializing, vq->private_data is set 4. When host userspace wakes up after 2s, send connecting pkt again, everything is fine. As suggested by Stefano Garzarella, this fixes it by additional kicking the send_pkt worker in vhost_vsock_start once the virtio device is started. This makes the pending pkt sent again. After this patch, kata-runtime (with vsock enabled) boot time is reduced from 3s to 1s on a ThunderX2 arm64 server. [1] https://github.com/kata-containers/runtime/issues/1917 Reported-by: Ning Bo Suggested-by: Stefano Garzarella Signed-off-by: Jia He Link: https://lore.kernel.org/r/20200501043840.186557-1-justin.he@arm.com Signed-off-by: Michael S. Tsirkin Reviewed-by: Stefano Garzarella Signed-off-by: Greg Kroah-Hartman

drm/qxl: qxl_release use after free

2020-05-05T17:14:41+00:00

commit 933db73351d359f74b14f4af095808260aff11f9 upstream. qxl_release should not be accesses after qxl_push_*_ring_release() calls: userspace driver can process submitted command quickly, move qxl_release into release_ring, generate interrupt and trigger garbage collector. It can lead to crashes in qxl driver or trigger memory corruption in some kmalloc-192 slab object Gerd Hoffmann proposes to swap the qxl_release_fence_buffer_objects() + qxl_push_{cursor,command}_ring_release() calls to close that race window. cc: stable@vger.kernel.org Fixes: f64122c1f6ad ("drm: add new QXL driver. (v1.4)") Signed-off-by: Vasily Averin Link: http://patchwork.freedesktop.org/patch/msgid/fa17b338-66ae-f299-68fe-8d32419d9071@virtuozzo.com Signed-off-by: Gerd Hoffmann [backported to v4.9-stable] Signed-off-by: Vasily Averin Signed-off-by: Greg Kroah-Hartman

dmaengine: dmatest: Fix iteration non-stop logic

2020-05-05T17:14:40+00:00

commit b9f960201249f20deea586b4ec814669b4c6b1c0 upstream. Under some circumstances, i.e. when test is still running and about to time out and user runs, for example, grep -H . /sys/module/dmatest/parameters/* the iterations parameter is not respected and test is going on and on until user gives echo 0 > /sys/module/dmatest/parameters/run This is not what expected. The history of this bug is interesting. I though that the commit 2d88ce76eb98 ("dmatest: add a 'wait' parameter") is a culprit, but looking closer to the code I think it simple revealed the broken logic from the day one, i.e. in the commit 0a2ff57d6fba ("dmaengine: dmatest: add a maximum number of test iterations") which adds iterations parameter. So, to the point, the conditional of checking the thread to be stopped being first part of conjunction logic prevents to check iterations. Thus, we have to always check both conditions to be able to stop after given iterations. Since it wasn't visible before second commit appeared, I add a respective Fixes tag. Fixes: 2d88ce76eb98 ("dmatest: add a 'wait' parameter") Cc: Dan Williams Cc: Nicolas Ferre Signed-off-by: Andy Shevchenko Acked-by: Nicolas Ferre Link: https://lore.kernel.org/r/20200424161147.16895-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system

2020-05-05T17:14:40+00:00

commit b74aa02d7a30ee5e262072a7d6e8deff10b37924 upstream. Currently, system fails to boot because the legacy interrupt remapping mode does not enable 128-bit IRTE (GA), which is required for x2APIC support. Fix by using AMD_IOMMU_GUEST_IR_LEGACY_GA mode when booting with kernel option amd_iommu_intr=legacy instead. The initialization logic will check GASup and automatically fallback to using AMD_IOMMU_GUEST_IR_LEGACY if GA mode is not supported. Fixes: 3928aa3f5775 ("iommu/amd: Detect and enable guest vAPIC support") Signed-off-by: Suravee Suthikulpanit Link: https://lore.kernel.org/r/1587562202-14183-1-git-send-email-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel Signed-off-by: Greg Kroah-Hartman