kernel/linux.git/drivers, branch v4.4.87

drm/ttm: Fix accounting error when fail to get pages for pool

2017-09-07T06:34:09+00:00

commit 9afae2719273fa1d406829bf3498f82dbdba71c7 upstream. When fail to get needed page for pool, need to put allocated pages into pool. But current code has a miscalculation of allocated pages, correct it. Signed-off-by: Xiangliang.Yu Reviewed-by: Christian König Reviewed-by: Monk Liu Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

wl1251: add a missing spin_lock_init()

2017-09-07T06:34:09+00:00

commit f581a0dd744fe32b0a8805e279c59ec1ac676d60 upstream. wl1251: add a missing spin_lock_init() This fixes the following kernel warning: [ 5668.771453] BUG: spinlock bad magic on CPU#0, kworker/u2:3/9745 [ 5668.771850] lock: 0xce63ef20, .magic: 00000000, .owner: /-1, .owner_cpu: 0 [ 5668.772277] CPU: 0 PID: 9745 Comm: kworker/u2:3 Tainted: G W 4.12.0-03002-gec979a4-dirty #40 [ 5668.772796] Hardware name: Nokia RX-51 board [ 5668.773071] Workqueue: phy1 wl1251_irq_work [ 5668.773345] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 5668.773803] [] (show_stack) from [] (do_raw_spin_lock+0x6c/0xa0) [ 5668.774230] [] (do_raw_spin_lock) from [] (_raw_spin_lock_irqsave+0x10/0x18) [ 5668.774658] [] (_raw_spin_lock_irqsave) from [] (wl1251_op_tx+0x38/0x5c) [ 5668.775115] [] (wl1251_op_tx) from [] (ieee80211_tx_frags+0x188/0x1c0) [ 5668.775543] [] (ieee80211_tx_frags) from [] (__ieee80211_tx+0x6c/0x130) [ 5668.775970] [] (__ieee80211_tx) from [] (ieee80211_tx+0xdc/0x104) [ 5668.776367] [] (ieee80211_tx) from [] (__ieee80211_subif_start_xmit+0x454/0x8c8) [ 5668.776824] [] (__ieee80211_subif_start_xmit) from [] (ieee80211_subif_start_xmit+0x30/0x2fc) [ 5668.777343] [] (ieee80211_subif_start_xmit) from [] (dev_hard_start_xmit+0x80/0x118) ... by adding the missing spin_lock_init(). Reported-by: Pavel Machek Cc: Kalle Valo Signed-off-by: Cong Wang Acked-by: Pavel Machek Signed-off-by: Kalle Valo Signed-off-by: Pavel Machek Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

i2c: ismt: Return EMSGSIZE for block reads with bogus length

2017-09-07T06:34:09+00:00

commit ba201c4f5ebe13d7819081756378777d8153f23e upstream. Compare the number of bytes actually seen on the wire to the byte count field returned by the slave device. Previously we just overwrote the byte count returned by the slave with the real byte count and let the caller figure out if the message was sane. Signed-off-by: Stephen Douthit Tested-by: Dan Priamo Acked-by: Neil Horman Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: ismt: Don't duplicate the receive length for block reads

2017-09-07T06:34:08+00:00

commit b6c159a9cb69c2cf0bf59d4e12c3a2da77e4d994 upstream. According to Table 15-14 of the C2000 EDS (Intel doc #510524) the rx data pointed to by the descriptor dptr contains the byte count. desc->rxbytes reports all bytes read on the wire, including the "byte count" byte. So if a device sends 4 bytes in response to a block read, on the wire and in the DMA buffer we see: count data1 data2 data3 data4 0x04 0xde 0xad 0xbe 0xef That's what we want to return in data->block to the next level. Instead we were actually prefixing that with desc->rxbytes: bad count count data1 data2 data3 data4 0x05 0x04 0xde 0xad 0xbe 0xef This was discovered while developing a BMC solution relying on the ipmi_ssif.c driver which was trying to interpret the bogus length field as part of the IPMI response. Signed-off-by: Stephen Douthit Tested-by: Dan Priamo Acked-by: Neil Horman Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

irqchip: mips-gic: SYNC after enabling GIC region

2017-09-07T06:34:08+00:00

commit 2c0e8382386f618c85d20cb05e7cf7df8cdd382c upstream. A SYNC is required between enabling the GIC region and actually trying to use it, even if the first access is a read, otherwise its possible depending on the timing (and in my case depending on the precise alignment of certain kernel code) to hit CM bus errors on that first access. Add the SYNC straight after setting the GIC base. [paul.burton@imgtec.com: Changes later in this series increase our likelihood of hitting this by reducing the amount of code that runs between enabling the GIC & accessing it.] Fixes: a7057270c280 ("irqchip: mips-gic: Add device-tree support") Signed-off-by: James Hogan Signed-off-by: Paul Burton Acked-by: Marc Zyngier Cc: Thomas Gleixner Cc: Jason Cooper Cc: James Hogan Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17019/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman

drm/i915: fix compiler warning in drivers/gpu/drm/i915/intel_uncore.c

2017-09-02T05:06:53+00:00

When building with gcc-7, the following warning happens: drivers/gpu/drm/i915/intel_uncore.c: In function ‘hsw_unclaimed_reg_detect’: drivers/gpu/drm/i915/intel_uncore.c:638:36: warning: decrement of a boolean expression [-Wbool-operation] i915.mmio_debug = mmio_debug_once--; ^~ As it's really not wise to -- on a boolean value. Commit 7571494004d8 ("drm/i915: Do one shot unclaimed mmio detection less frequently") which showed up in 4.6-rc1 does solve this issue, by rewriting the mmio detection logic, but that isn't really good to backport to 4.4-stable, so just fix up the obvious logic here to do the right thing. Cc: Chris Wilson Cc: Paulo Zanoni Cc: Mika Kuoppala Signed-off-by: Greg Kroah-Hartman

scsi: sg: reset 'res_in_use' after unlinking reserved array

2017-09-02T05:06:53+00:00

commit e791ce27c3f6a1d3c746fd6a8f8e36c9540ec6f9 upstream. Once the reserved page array is unused we can reset the 'res_in_use' state; here we can do a lazy update without holding the mutex as we only need to check against concurrent access, not concurrent release. [mkp: checkpatch] Fixes: 1bc0eb044615 ("scsi: sg: protect accesses to 'reserved' page array") Signed-off-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen Cc: Todd Poynor Signed-off-by: Greg Kroah-Hartman

scsi: sg: protect accesses to 'reserved' page array

2017-09-02T05:06:53+00:00

commit 1bc0eb0446158cc76562176b80623aa119afee5b upstream. The 'reserved' page array is used as a short-cut for mapping data, saving us to allocate pages per request. However, the 'reserved' array is only capable of holding one request, so this patch introduces a mutex for protect 'sg_fd' against concurrent accesses. Signed-off-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Tested-by: Johannes Thumshirn Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman [toddpoynor@google.com: backport to 3.18-4.9, fixup for bad ioctl SG_SET_FORCE_LOW_DMA code removed in later versions and not modified by the original patch.] Signed-off-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Tested-by: Johannes Thumshirn Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen Signed-off-by: Todd Poynor Signed-off-by: Greg Kroah-Hartman

lpfc: Fix Device discovery failures during switch reboot test.

2017-09-02T05:06:51+00:00

commit 342b59caa66240b670285d519fdfe2c44289b516 upstream. When the switch is rebooted, the lpfc driver fails to log into the fabric, and Unexpected timeout message is seen. Fix: Do not issue RegVFI if the FLOGI was internally aborted. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Guilherme G. Piccoli Signed-off-by: Greg Kroah-Hartman

p54: memset(0) whole array

2017-09-02T05:06:51+00:00

commit 6f17581788206444cbbcdbc107498f85e9765e3d upstream. gcc 7 complains: drivers/net/wireless/intersil/p54/fwio.c: In function 'p54_scan': drivers/net/wireless/intersil/p54/fwio.c:491:4: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size] Fix that by passing the correct size to memset. Signed-off-by: Jiri Slaby Cc: Christian Lamparter Cc: Kalle Valo Acked-by: Christian Lamparter Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman