kernel/linux.git/drivers, branch v4.4.52

Revert "usb: chipidea: imx: enable CI_HDRC_SET_NON_ZERO_TTHA"

2017-02-26T10:07:51+00:00

commit 1bc7da87c7410c6990c3251589e3854e64c55af2 upstream. This reverts commit e765bfb73ff7. In the most of cases, we only use one transaction per frame and the frame rate may be high, If the platforms want to support multiple transactions but less frame rate cases like [1] and [2], it can set "non-zero-ttctrl-ttha" at dts. [1] http://www.spinics.net/lists/linux-usb/msg123125.html [2] http://www.spinics.net/lists/linux-usb/msg118679.html Signed-off-by: Peter Chen Cc: Martin Fuzzey Signed-off-by: Greg Kroah-Hartman

rtlwifi: rtl_usb: Fix for URB leaking when doing ifconfig up/down

2017-02-26T10:07:51+00:00

commit 575ddce0507789bf9830d089557d2199d2f91865 upstream. In the function rtl_usb_start we pre-allocate a certain number of urbs for RX path but they will not be freed when calling rtl_usb_stop. This results in leaking urbs when doing ifconfig up and down. Eventually, the system has no available urbs. Signed-off-by: Michael Schenk Signed-off-by: Larry Finger Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

goldfish: Sanitize the broken interrupt handler

2017-02-26T10:07:51+00:00

commit 6cf18e6927c0b224f972e3042fb85770d63cb9f8 upstream. This interrupt handler is broken in several ways: - It loops forever when the op code is not decodeable - It never returns IRQ_HANDLED because the only way to exit the loop returns IRQ_NONE unconditionally. The whole concept of this is broken. Creating devices in an interrupt handler is beyond any point of sanity. Make it at least behave halfways sane so accidental users do not have to deal with a hard to debug lockup. Fixes: e809c22b8fb028 ("goldfish: add the goldfish virtual bus") Reported-by: Gabriel C Signed-off-by: Thomas Gleixner Acked-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

USB: serial: ark3116: fix register-accessor error handling

2017-02-26T10:07:51+00:00

commit 9fef37d7cf170522fb354d6d0ea6de09b9b16678 upstream. The current implementation failed to detect short transfers, something which could lead to bits of the uninitialised heap transfer buffer leaking to user space. Fixes: 149fc791a452 ("USB: ark3116: Setup some basic infrastructure for new ark3116 driver.") Fixes: f4c1e8d597d1 ("USB: ark3116: Make existing functions 16450-aware and add close and release functions.") Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: opticon: fix CTS retrieval at open

2017-02-26T10:07:51+00:00

commit 2eee05020a0e7ee7c04422cbacdb07859e45dce6 upstream. The opticon driver used a control request at open to trigger a CTS status notification to be sent over the bulk-in pipe. When the driver was converted to using the generic read implementation, an inverted test prevented this request from being sent, something which could lead to TIOCMGET reporting an incorrect CTS state. Reported-by: Dan Carpenter Fixes: 7a6ee2b02751 ("USB: opticon: switch to generic read implementation") Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: spcp8x5: fix modem-status handling

2017-02-26T10:07:51+00:00

commit 5ed8d41023751bdd3546f2fe4118304357efe8d2 upstream. Make sure to detect short control transfers and return zero on success when retrieving the modem status. This fixes the TIOCMGET implementation which since e1ed212d8593 ("USB: spcp8x5: add proper modem-status support") has returned TIOCM_LE on successful retrieval, and avoids leaking bits from the stack on short transfers. This also fixes the carrier-detect implementation which since the above mentioned commit unconditionally has returned true. Fixes: e1ed212d8593 ("USB: spcp8x5: add proper modem-status support") Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: fix line-status over-reporting

2017-02-26T10:07:51+00:00

commit a6bb1e17a39818b01b55d8e6238b4b5f06d55038 upstream. FTDI devices use a receive latency timer to periodically empty the receive buffer and report modem and line status (also when the buffer is empty). When a break or error condition is detected the corresponding status flags will be set on a packet with nonzero data payload and the flags are not updated until the break is over or further characters are received. In order to avoid over-reporting break and error conditions, these flags must therefore only be processed for packets with payload. This specifically fixes the case where after an overrun, the error condition is continuously reported and NULL-characters inserted until further data is received. Reported-by: Michael Walle Fixes: 72fda3ca6fc1 ("USB: serial: ftd_sio: implement sysrq handling on break") Fixes: 166ceb690750 ("USB: ftdi_sio: clean up line-status handling") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: fix extreme low-latency setting

2017-02-26T10:07:51+00:00

commit c6dce2626606ef16434802989466636bc28c1419 upstream. Since commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") the FTDI driver has been using a receive latency-timer value of 1 ms instead of the device default of 16 ms. The latency timer is used to periodically empty a non-full receive buffer, but a status header is always sent when the timer expires including when the buffer is empty. This means that a two-byte bulk message is received every millisecond also for an otherwise idle port as long as it is open. Let's restore the pre-2009 behaviour which reduces the rate of the status messages to 1/16th (e.g. interrupt frequency drops from 1 kHz to 62.5 Hz) by not setting ASYNC_LOW_LATENCY by default. Anyone willing to pay the price for the minimum-latency behaviour should set the flag explicitly instead using the TIOCSSERIAL ioctl or a tool such as setserial (e.g. setserial /dev/ttyUSB0 low_latency). Note that since commit 0cbd81a9f6ba ("USB: ftdi_sio: remove tty->low_latency") the ASYNC_LOW_LATENCY flag has no other effects but to set a minimal latency timer. Reported-by: Antoine Aubert Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: fix modem-status error handling

2017-02-26T10:07:50+00:00

commit 427c3a95e3e29e65f59d99aaf320d7506f3eed57 upstream. Make sure to detect short responses when fetching the modem status in order to avoid parsing uninitialised buffer data and having bits of it leak to user space. Note that we still allow for short 1-byte responses. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: add new IDs for GE Bx50v3 boards

2017-02-26T10:07:50+00:00

commit 9a593656def0dc2f6c227851e8e602077267a5f1 upstream. Add new USB IDs for cp2104/5 devices on Bx50v3 boards due to the design change. Signed-off-by: Ken Lin Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman