kernel/linux.git/drivers, branch v4.4.44

pinctrl: sh-pfc: Do not unconditionally support PIN_CONFIG_BIAS_DISABLE

2017-01-19T19:17:23+00:00

commit 5d7400c4acbf7fe633a976a89ee845f7333de3e4 upstream. Always stating PIN_CONFIG_BIAS_DISABLE is supported gives untrue output when examining /sys/kernel/debug/pinctrl/e6060000.pfc/pinconf-pins if the operation get_bias() is implemented but the pin is not handled by the get_bias() implementation. In that case the output will state that "input bias disabled" indicating that this pin has bias control support. Make support for PIN_CONFIG_BIAS_DISABLE depend on that the pin either supports SH_PFC_PIN_CFG_PULL_UP or SH_PFC_PIN_CFG_PULL_DOWN. This also solves the issue where SoC specific implementations print error messages if their particular implementation of {set,get}_bias() is called with a pin it does not know about. Signed-off-by: Niklas Söderlund Acked-by: Laurent Pinchart Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman

bus: vexpress-config: fix device reference leak

2017-01-19T19:17:22+00:00

commit c090959b9dd8c87703e275079aa4b4a824ba3f8e upstream. Make sure to drop the reference to the parent device taken by class_find_device() after populating the bus. Fixes: 3b9334ac835b ("mfd: vexpress: Convert custom func API to regmap") Acked-by: Sudeep Holla Signed-off-by: Johan Hovold Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

ACPI / APEI: Fix NMI notification handling

2017-01-19T19:17:22+00:00

commit a545715d2dae8d071c5b06af947b07ffa846b288 upstream. When removing and adding cpu 0 on a system with GHES NMI the following stack trace is seen when re-adding the cpu: WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:1349 setup_local_APIC+ Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache coretemp intel_ra CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc6+ #2 Call Trace: dump_stack+0x63/0x8e __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 setup_local_APIC+0x275/0x370 apic_ap_setup+0xe/0x20 start_secondary+0x48/0x180 set_init_arg+0x55/0x55 early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x13d/0x14c During the cpu bringup, wakeup_cpu_via_init_nmi() is called and issues an NMI on CPU 0. The GHES NMI handler, ghes_notify_nmi() runs the ghes_proc_irq_work work queue which ends up setting IRQ_WORK_VECTOR (0xf6). The "faulty" IR line set at arch/x86/kernel/apic/apic.c:1349 is also 0xf6 (specifically APIC IRR for irqs 255 to 224 is 0x400000) which confirms that something has set the IRQ_WORK_VECTOR line prior to the APIC being initialized. Commit 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler") incorrectly modified the behavior such that the handler returns NMI_HANDLED only if an error was processed, and incorrectly runs the ghes work queue for every NMI. This patch modifies the ghes_proc_irq_work() to run as it did prior to 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler") by properly returning NMI_HANDLED and only calling the work queue if NMI_HANDLED has been set. Fixes: 2383844d4850 (GHES: Elliminate double-loop in the NMI handler) Signed-off-by: Prarit Bhargava Reviewed-by: Borislav Petkov Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

cpufreq: powernv: Disable preemption while checking CPU throttling state

2017-01-19T19:17:22+00:00

commit 8a10c06a20ec8097a68fd7a4a1c0e285095b4d2f upstream. With preemption turned on we can read incorrect throttling state while being switched to CPU on a different chip. BUG: using smp_processor_id() in preemptible [00000000] code: cat/7343 caller is .powernv_cpufreq_throttle_check+0x2c/0x710 CPU: 13 PID: 7343 Comm: cat Not tainted 4.8.0-rc5-dirty #1 Call Trace: [c0000007d25b75b0] [c000000000971378] .dump_stack+0xe4/0x150 (unreliable) [c0000007d25b7640] [c0000000005162e4] .check_preemption_disabled+0x134/0x150 [c0000007d25b76e0] [c0000000007b63ac] .powernv_cpufreq_throttle_check+0x2c/0x710 [c0000007d25b7790] [c0000000007b6d18] .powernv_cpufreq_target_index+0x288/0x360 [c0000007d25b7870] [c0000000007acee4] .__cpufreq_driver_target+0x394/0x8c0 [c0000007d25b7920] [c0000000007b22ac] .cpufreq_set+0x7c/0xd0 [c0000007d25b79b0] [c0000000007adf50] .store_scaling_setspeed+0x80/0xc0 [c0000007d25b7a40] [c0000000007ae270] .store+0xa0/0x100 [c0000007d25b7ae0] [c0000000003566e8] .sysfs_kf_write+0x88/0xb0 [c0000007d25b7b70] [c0000000003553b8] .kernfs_fop_write+0x178/0x260 [c0000007d25b7c10] [c0000000002ac3cc] .__vfs_write+0x3c/0x1c0 [c0000007d25b7cf0] [c0000000002ad584] .vfs_write+0xc4/0x230 [c0000007d25b7d90] [c0000000002aeef8] .SyS_write+0x58/0x100 [c0000007d25b7e30] [c00000000000bfec] system_call+0x38/0xfc Fixes: 09a972d16209 (cpufreq: powernv: Report cpu frequency throttling) Reviewed-by: Gautham R. Shenoy Signed-off-by: Denis Kirjanov Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

pinctrl: meson: fix gpio request disabling other modes

2017-01-19T19:17:22+00:00

commit f24d311f92b516a8aadef5056424ccabb4068e7b upstream. The pinctrl_gpio_request is called with the "full" gpio number, already containing the base, then meson_pmx_request_gpio is then called with the final pin number. Remove the base addition when calling meson_pmx_disable_other_groups. Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs") CC: Beniamino Galvani Signed-off-by: Neil Armstrong Acked-by: Kevin Hilman Acked-by: Beniamino Galvani Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

USB: serial: ch341: fix modem-control and B0 handling

2017-01-19T19:17:21+00:00

commit 030ee7ae52a46a2be52ccc8242c4a330aba8d38e upstream. The modem-control signals are managed by the tty-layer during open and should not be asserted prematurely when set_termios is called from driver open. Also make sure that the signals are asserted only when changing speed from B0. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: ch341: fix resume after reset

2017-01-19T19:17:21+00:00

commit ce5e292828117d1b71cbd3edf9e9137cf31acd30 upstream. Fix reset-resume handling which failed to resubmit the read and interrupt URBs, thereby leaving a port that was open before suspend in a broken state until closed and reopened. Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Fixes: 2bfd1c96a9fb ("USB: serial: ch341: remove reset_resume callback") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

drm/radeon: drop verde dpm quirks

2017-01-19T19:17:21+00:00

commit 8a08403bcb39f5d0e733bcf59a8a74f16b538f6e upstream. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98897 https://bugs.launchpad.net/bugs/1651981 Acked-by: Edward O'Callaghan Signed-off-by: Alex Deucher Cc: Adrian Fiergolski Signed-off-by: Greg Kroah-Hartman

sysrq: attach sysrq handler correctly for 32-bit kernel

2017-01-19T19:17:21+00:00

commit 802c03881f29844af0252b6e22be5d2f65f93fd0 upstream. The sysrq input handler should be attached to the input device which has a left alt key. On 32-bit kernels, some input devices which has a left alt key cannot attach sysrq handler. Because the keybit bitmap in struct input_device_id for sysrq is not correctly initialized. KEY_LEFTALT is 56 which is greater than BITS_PER_LONG on 32-bit kernels. I found this problem when using a matrix keypad device which defines a KEY_LEFTALT (56) but doesn't have a KEY_O (24 == 56%32). Cc: Jiri Slaby Signed-off-by: Akinobu Mita Acked-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx

2017-01-19T19:17:21+00:00

commit 89d8232411a85b9a6b12fd5da4d07d8a138a8e0c upstream. If we don't disable the transmitter in atmel_stop_tx, the DMA buffer continues to send data until it is emptied. This cause problems with the flow control (CTS is asserted and data are still sent). So, disabling the transmitter in atmel_stop_tx is a sane thing to do. Tested on at91sam9g35-cm(DMA) Tested for regressions on sama5d2-xplained(Fifo) and at91sam9g20ek(PDC) Signed-off-by: Richard Genoud Acked-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman