kernel/linux.git/drivers, branch v4.4.298

Input: spaceball - fix parsing of movement data packets

2022-01-05T11:30:27+00:00

commit bc7ec91718c49d938849697cfad98fcd9877cc26 upstream. The spaceball.c module was not properly parsing the movement reports coming from the device. The code read axis data as signed 16-bit little-endian values starting at offset 2. In fact, axis data in Spaceball movement reports are signed 16-bit big-endian values starting at offset 3. This was determined first by visually inspecting the data packets, and later verified by consulting: http://spacemice.org/pdf/SpaceBall_2003-3003_Protocol.pdf If this ever worked properly, it was in the time before Git... Signed-off-by: Leo L. Schwab Link: https://lore.kernel.org/r/20211221101630.1146385-1-ewhac@ewhac.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: appletouch - initialize work before device registration

2022-01-05T11:30:27+00:00

commit 9f3ccdc3f6ef10084ceb3a47df0961bec6196fd0 upstream. Syzbot has reported warning in __flush_work(). This warning is caused by work->func == NULL, which means missing work initialization. This may happen, since input_dev->close() calls cancel_work_sync(&dev->work), but dev->work initalization happens _after_ input_register_device() call. So this patch moves dev->work initialization before registering input device Fixes: 5a6eb676d3bc ("Input: appletouch - improve powersaving for Geyser3 devices") Reported-and-tested-by: syzbot+b88c5eae27386b252bbd@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin Link: https://lore.kernel.org/r/20211230141151.17300-1-paskripkin@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

scsi: vmw_pvscsi: Set residual data length conditionally

2022-01-05T11:30:27+00:00

commit 142c779d05d1fef75134c3cb63f52ccbc96d9e1f upstream. The PVSCSI implementation in the VMware hypervisor under specific configuration ("SCSI Bus Sharing" set to "Physical") returns zero dataLen in the completion descriptor for READ CAPACITY(16). As a result, the kernel can not detect proper disk geometry. This can be recognized by the kernel message: [ 0.776588] sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512. The PVSCSI implementation in QEMU does not set dataLen at all, keeping it zeroed. This leads to a boot hang as was reported by Shmulik Ladkani. It is likely that the controller returns the garbage at the end of the buffer. Residual length should be set by the driver in that case. The SCSI layer will erase corresponding data. See commit bdb2b8cab439 ("[SCSI] erase invalid data returned by device") for details. Commit e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length") introduced the issue by setting residual length unconditionally, causing the SCSI layer to erase the useful payload beyond dataLen when this value is returned as 0. As a result, considering existing issues in implementations of PVSCSI controllers, we do not want to call scsi_set_resid() when dataLen == 0. Calling scsi_set_resid() has no effect if dataLen equals buffer length. Link: https://lore.kernel.org/lkml/20210824120028.30d9c071@blondie/ Link: https://lore.kernel.org/r/20211220190514.55935-1-amakhalov@vmware.com Fixes: e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length") Cc: Matt Wang Cc: Martin K. Petersen Cc: Vishal Bhakta Cc: VMware PV-Drivers Cc: James E.J. Bottomley Cc: linux-scsi@vger.kernel.org Cc: stable@vger.kernel.org Reported-and-suggested-by: Shmulik Ladkani Signed-off-by: Alexey Makhalov Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.

2022-01-05T11:30:27+00:00

commit b1e0887379422975f237d43d8839b751a6bcf154 upstream. ffs_data_clear is indirectly called from both ffs_fs_kill_sb and ffs_ep0_release, so it ends up being called twice when userland closes ep0 and then unmounts f_fs. If userland provided an eventfd along with function's USB descriptors, it ends up calling eventfd_ctx_put as many times, causing a refcount underflow. NULL-ify ffs_eventfd to prevent these extraneous eventfd_ctx_put calls. Also, set epfiles to NULL right after de-allocating it, for readability. For completeness, ffs_data_clear actually ends up being called thrice, the last call being before the whole ffs structure gets freed, so when this specific sequence happens there is a second underflow happening (but not being reported): /sys/kernel/debug/tracing# modprobe usb_f_fs /sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter /sys/kernel/debug/tracing# echo function > current_tracer /sys/kernel/debug/tracing# echo 1 > tracing_on (setup gadget, run and kill function userland process, teardown gadget) /sys/kernel/debug/tracing# echo 0 > tracing_on /sys/kernel/debug/tracing# cat trace smartcard-openp-436 [000] ..... 1946.208786: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] ..... 1946.279147: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] .n... 1946.905512: ffs_data_clear <-ffs_data_put Warning output corresponding to above trace: [ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c [ 1946.293094] refcount_t: underflow; use-after-free. [ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E) [ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G C OE 5.15.0-1-rpi #1 Debian 5.15.3-1 [ 1946.417950] Hardware name: BCM2835 [ 1946.425442] Backtrace: [ 1946.432048] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 1946.448226] r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c [ 1946.458412] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 1946.470380] [] (dump_stack) from [] (__warn+0xe8/0x154) [ 1946.482067] r5:c04a948c r4:c0a71dc8 [ 1946.490184] [] (__warn) from [] (warn_slowpath_fmt+0xa0/0xe4) [ 1946.506758] r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04 [ 1946.517070] [] (warn_slowpath_fmt) from [] (refcount_warn_saturate+0x110/0x15c) [ 1946.535309] r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0 [ 1946.546708] [] (refcount_warn_saturate) from [] (eventfd_ctx_put+0x48/0x74) [ 1946.564476] [] (eventfd_ctx_put) from [] (ffs_data_clear+0xd0/0x118 [usb_f_fs]) [ 1946.582664] r5:c3b84c00 r4:c2695b00 [ 1946.590668] [] (ffs_data_clear [usb_f_fs]) from [] (ffs_data_closed+0x9c/0x150 [usb_f_fs]) [ 1946.609608] r5:bf54d014 r4:c2695b00 [ 1946.617522] [] (ffs_data_closed [usb_f_fs]) from [] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs]) [ 1946.636217] r7:c0dfcb84 r6:c3a12260 r5:bf54d014 r4:c229f000 [ 1946.646273] [] (ffs_fs_kill_sb [usb_f_fs]) from [] (deactivate_locked_super+0x54/0x9c) [ 1946.664893] r5:bf54d014 r4:c229f000 [ 1946.672921] [] (deactivate_locked_super) from [] (deactivate_super+0x60/0x64) [ 1946.690722] r5:c2a09000 r4:c229f000 [ 1946.698706] [] (deactivate_super) from [] (cleanup_mnt+0xe4/0x14c) [ 1946.715553] r5:c2a09000 r4:00000000 [ 1946.723528] [] (cleanup_mnt) from [] (__cleanup_mnt+0x1c/0x20) [ 1946.739922] r7:c0dfcb84 r6:c3a12260 r5:c3a126fc r4:00000000 [ 1946.750088] [] (__cleanup_mnt) from [] (task_work_run+0x84/0xb8) [ 1946.766602] [] (task_work_run) from [] (do_work_pending+0x470/0x56c) [ 1946.783540] r7:5ac3c35a r6:c0d0424c r5:c200bfb0 r4:c200a000 [ 1946.793614] [] (do_work_pending) from [] (slow_work_pending+0xc/0x20) [ 1946.810553] Exception stack(0xc200bfb0 to 0xc200bff8) [ 1946.820129] bfa0: 00000000 00000000 000000aa b5e21430 [ 1946.837104] bfc0: bef867a0 00000001 bef86840 00000034 bef86838 bef86790 bef86794 bef867a0 [ 1946.854125] bfe0: 00000000 bef86798 b67b7a1c b6d626a4 60000010 b5a23760 [ 1946.865335] r10:00000000 r9:c200a000 r8:c0100224 r7:00000034 r6:bef86840 r5:00000001 [ 1946.881914] r4:bef867a0 [ 1946.888793] ---[ end trace 7387f2a9725b28d0 ]--- Fixes: 5e33f6fdf735 ("usb: gadget: ffs: add eventfd notification about ffs events") Cc: stable Signed-off-by: Vincent Pelletier Link: https://lore.kernel.org/r/f79eeea29f3f98de6782a064ec0f7351ad2f598f.1639793920.git.plr.vincent@gmail.com Signed-off-by: Greg Kroah-Hartman

xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.

2022-01-05T11:30:27+00:00

commit e4844092581ceec22489b66c42edc88bc6079783 upstream. The Fresco Logic FL1100 controller needs the TRUST_TX_LENGTH quirk like other Fresco controllers, but should not have the BROKEN_MSI quirks set. BROKEN_MSI quirk causes issues in detecting usb drives connected to docks with this FL1100 controller. The BROKEN_MSI flag was apparently accidentally set together with the TRUST_TX_LENGTH quirk Original patch went to stable so this should go there as well. Fixes: ea0f69d82119 ("xhci: Enable trust tx length quirk for Fresco FL11 USB controller") Cc: stable@vger.kernel.org cc: Nikolay Martynov Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20211221112825.54690-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

platform/x86: apple-gmux: use resource_size() with res

2022-01-05T11:30:27+00:00

[ Upstream commit eb66fb03a727cde0ab9b1a3858de55c26f3007da ] This should be (res->end - res->start + 1) here actually, use resource_size() derectly. Signed-off-by: Wang Qing Link: https://lore.kernel.org/r/1639484316-75873-1-git-send-email-wangqing@vivo.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Sasha Levin

hamradio: improve the incomplete fix to avoid NPD

2021-12-29T10:50:30+00:00

commit b2f37aead1b82a770c48b5d583f35ec22aabb61e upstream. The previous commit 3e0588c291d6 ("hamradio: defer ax25 kfree after unregister_netdev") reorder the kfree operations and unregister_netdev operation to prevent UAF. This commit improves the previous one by also deferring the nullify of the ax->tty pointer. Otherwise, a NULL pointer dereference bug occurs. Partial of the stack trace is shown below. BUG: kernel NULL pointer dereference, address: 0000000000000538 RIP: 0010:ax_xmit+0x1f9/0x400 ... Call Trace: dev_hard_start_xmit+0xec/0x320 sch_direct_xmit+0xea/0x240 __qdisc_run+0x166/0x5c0 __dev_queue_xmit+0x2c7/0xaf0 ax25_std_establish_data_link+0x59/0x60 ax25_connect+0x3a0/0x500 ? security_socket_connect+0x2b/0x40 __sys_connect+0x96/0xc0 ? __hrtimer_init+0xc0/0xc0 ? common_nsleep+0x2e/0x50 ? switch_fpu_return+0x139/0x1a0 __x64_sys_connect+0x11/0x20 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The crash point is shown as below static void ax_encaps(...) { ... set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); // ax->tty = NULL! ... } By placing the nullify action after the unregister_netdev, the ax->tty pointer won't be assigned as NULL net_device framework layer is well synchronized. Signed-off-by: Lin Ma Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

hamradio: defer ax25 kfree after unregister_netdev

2021-12-29T10:50:30+00:00

commit 3e0588c291d6ce225f2b891753ca41d45ba42469 upstream. There is a possible race condition (use-after-free) like below (USE) | (FREE) ax25_sendmsg | ax25_queue_xmit | dev_queue_xmit | __dev_queue_xmit | __dev_xmit_skb | sch_direct_xmit | ... xmit_one | netdev_start_xmit | tty_ldisc_kill __netdev_start_xmit | mkiss_close ax_xmit | kfree ax_encaps | | Even though there are two synchronization primitives before the kfree: 1. wait_for_completion(&ax->dead). This can prevent the race with routines from mkiss_ioctl. However, it cannot stop the routine coming from upper layer, i.e., the ax25_sendmsg. 2. netif_stop_queue(ax->dev). It seems that this line of code aims to halt the transmit queue but it fails to stop the routine that already being xmit. This patch reorder the kfree after the unregister_netdev to avoid the possible UAF as the unregister_netdev() is well synchronized and won't return if there is a running routine. Signed-off-by: Lin Ma Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

xen/blkfront: fix bug in backported patch

2021-12-29T10:50:30+00:00

The backport of commit 8f5a695d99000fc ("xen/blkfront: don't take local copy of a request from the ring page") to stable 4.4 kernel introduced a bug when adding the needed blkif_ring_get_request() function, as info->ring.req_prod_pvt was incremented twice now. Fix that be deleting the now superfluous increments after calling that function. Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

hwmon: (lm90) Fix usage of CONFIG2 register in detect function

2021-12-29T10:50:30+00:00

[ Upstream commit fce15c45d3fbd9fc1feaaf3210d8e3f8b33dfd3a ] The detect function had a comment "Make compiler happy" when id did not read the second configuration register. As it turns out, the code was checking the contents of this register for manufacturer ID 0xA1 (NXP Semiconductor/Philips), but never actually read the register. So it wasn't surprising that the compiler complained, and it indeed had a point. Fix the code to read the register contents for manufacturer ID 0xa1. At the same time, the code was reading the register for manufacturer ID 0x41 (Analog Devices), but it was not using the results. In effect it was just checking if reading the register returned an error. That doesn't really add much if any value, so stop doing that. Fixes: f90be42fb383 ("hwmon: (lm90) Refactor reading of config2 register") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin