kernel/linux.git/drivers, branch v4.4.296

xen/netback: don't queue unlimited number of packages

2021-12-22T08:04:19+00:00

commit be81992f9086b230623ae3ebbc85ecee4d00a3d3 upstream. In case a guest isn't consuming incoming network traffic as fast as it is coming in, xen-netback is buffering network packages in unlimited numbers today. This can result in host OOM situations. Commit f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping") meant to introduce a mechanism to limit the amount of buffered data by stopping the Tx queue when reaching the data limit, but this doesn't work for cases like UDP. When hitting the limit don't queue further SKBs, but drop them instead. In order to be able to tell Rx packages have been dropped increment the rx_dropped statistics counter in this case. It should be noted that the old solution to continue queueing SKBs had the additional problem of an overflow of the 32-bit rx_queue_len value would result in intermittent Tx queue enabling. This is part of XSA-392 Fixes: f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping") Signed-off-by: Juergen Gross Reviewed-by: Jan Beulich Signed-off-by: Greg Kroah-Hartman

xen/console: harden hvc_xen against event channel storms

2021-12-22T08:04:19+00:00

commit fe415186b43df0db1f17fa3a46275fd92107fe71 upstream. The Xen console driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using a lateeoi event channel. For the normal domU initial console this requires the introduction of bind_evtchn_to_irq_lateeoi() as there is no xenbus device available at the time the event channel is bound to the irq. As the decision whether an interrupt was spurious or not requires to test for bytes having been read from the backend, move sending the event into the if statement, as sending an event without having found any bytes to be read is making no sense at all. This is part of XSA-391 Signed-off-by: Juergen Gross Reviewed-by: Jan Beulich Signed-off-by: Greg Kroah-Hartman

xen/netfront: harden netfront against event channel storms

2021-12-22T08:04:19+00:00

commit b27d47950e481f292c0a5ad57357edb9d95d03ba upstream. The Xen netfront driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using lateeoi event channels. For being able to detect the case of no rx responses being added while the carrier is down a new lock is needed in order to update and test rsp_cons and the number of seen unconsumed responses atomically. This is part of XSA-391 Signed-off-by: Juergen Gross Reviewed-by: Jan Beulich Signed-off-by: Greg Kroah-Hartman

xen/blkfront: harden blkfront against event channel storms

2021-12-22T08:04:19+00:00

commit 0fd08a34e8e3b67ec9bd8287ac0facf8374b844a upstream. The Xen blkfront driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using lateeoi event channels. This is part of XSA-391 Signed-off-by: Juergen Gross Reviewed-by: Jan Beulich Signed-off-by: Greg Kroah-Hartman

Input: touchscreen - avoid bitwise vs logical OR warning

2021-12-22T08:04:18+00:00

commit a02dcde595f7cbd240ccd64de96034ad91cffc40 upstream. A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types: drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated. To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Signed-off-by: Nathan Chancellor Reported-by: Nick Desaulniers Reviewed-by: Nick Desaulniers Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Anders Roxell Signed-off-by: Greg Kroah-Hartman

net: lan78xx: Avoid unnecessary self assignment

2021-12-22T08:04:18+00:00

commit 94e7c844990f0db92418586b107be135b4963b66 upstream. Clang warns when a variable is assigned to itself. drivers/net/usb/lan78xx.c:940:11: warning: explicitly assigning value of variable of type 'u32' (aka 'unsigned int') to itself [-Wself-assign] offset = offset; ~~~~~~ ^ ~~~~~~ 1 warning generated. Reorder the if statement to acheive the same result and avoid a self assignment warning. Link: https://github.com/ClangBuiltLinux/linux/issues/129 Signed-off-by: Nathan Chancellor Signed-off-by: David S. Miller Signed-off-by: Anders Roxell Signed-off-by: Greg Kroah-Hartman

net: systemport: Add global locking for descriptor lifecycle

2021-12-22T08:04:18+00:00

commit 8b8e6e782456f1ce02a7ae914bbd5b1053f0b034 upstream. The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add Telit FN990 compositions

2021-12-22T08:04:18+00:00

commit 2b503c8598d1b232e7fc7526bce9326d92331541 upstream. Add the following Telit FN990 compositions: 0x1070: tty, adb, rmnet, tty, tty, tty, tty 0x1071: tty, adb, mbim, tty, tty, tty, tty 0x1072: rndis, tty, adb, tty, tty, tty, tty 0x1073: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Daniele Palmas Link: https://lore.kernel.org/r/20211210100714.22587-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error

2021-12-22T08:04:18+00:00

commit 94185adbfad56815c2c8401e16d81bdb74a79201 upstream. PCI_MSIX_FLAGS_MASKALL is set in the MSI-X control register at MSI-X interrupt setup time. It's cleared on success, but the error handling path only clears the PCI_MSIX_FLAGS_ENABLE bit. That's incorrect as the reset state of the PCI_MSIX_FLAGS_MASKALL bit is zero. That can be observed via lspci: Capabilities: [b0] MSI-X: Enable- Count=67 Masked+ Clear the bit in the error path to restore the reset state. Fixes: 438553958ba1 ("PCI/MSI: Enable and mask MSI-X early") Reported-by: Stefan Roese Signed-off-by: Thomas Gleixner Tested-by: Stefan Roese Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas Cc: Michal Simek Cc: Marek Vasut Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tufevoqx.ffs@tglx Signed-off-by: Greg Kroah-Hartman

USB: gadget: bRequestType is a bitfield, not a enum

2021-12-22T08:04:18+00:00

[ Upstream commit f08adf5add9a071160c68bb2a61d697f39ab0758 ] Szymon rightly pointed out that the previous check for the endpoint direction in bRequestType was not looking at only the bit involved, but rather the whole value. Normally this is ok, but for some request types, bits other than bit 8 could be set and the check for the endpoint length could not stall correctly. Fix that up by only checking the single bit. Fixes: 153a2d7e3350 ("USB: gadget: detect too-big endpoint 0 requests") Cc: Felipe Balbi Reported-by: Szymon Heidrich Link: https://lore.kernel.org/r/20211214184621.385828-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin