kernel/linux.git/drivers, branch v4.4.254

xen-blkback: set ring->xenblkd to NULL after kthread_stop()

2021-01-30T12:25:57+00:00

commit 1c728719a4da6e654afb9cc047164755072ed7c9 upstream. When xen_blkif_disconnect() is called, the kernel thread behind the block interface is stopped by calling kthread_stop(ring->xenblkd). The ring->xenblkd thread pointer being non-NULL determines if the thread has been already stopped. Normally, the thread's function xen_blkif_schedule() sets the ring->xenblkd to NULL, when the thread's main loop ends. However, when the thread has not been started yet (i.e. wake_up_process() has not been called on it), the xen_blkif_schedule() function would not be called yet. In such case the kthread_stop() call returns -EINTR and the ring->xenblkd remains dangling. When this happens, any consecutive call to xen_blkif_disconnect (for example in frontend_changed() callback) leads to a kernel crash in kthread_stop() (e.g. NULL pointer dereference in exit_creds()). This is XSA-350. Cc: # 4.12 Fixes: a24fa22ce22a ("xen/blkback: don't use xen_blkif_get() in xen-blkback kthread") Reported-by: Olivier Benjamin Reported-by: Pawel Wieczorkiewicz Signed-off-by: Pawel Wieczorkiewicz Reviewed-by: Julien Grall Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross [iwamatsu: change from ring to blkif] Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Greg Kroah-Hartman

sh_eth: Fix power down vs. is_opened flag ordering

2021-01-30T12:25:56+00:00

commit f6a2e94b3f9d89cb40771ff746b16b5687650cbb upstream. sh_eth_close() does a synchronous power down of the device before marking it closed. Revert the order, to make sure the device is never marked opened while suspended. While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as there is no reason to do a synchronous power down. Fixes: 7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context") Signed-off-by: Geert Uytterhoeven Reviewed-by: Sergei Shtylyov Reviewed-by: Niklas Söderlund Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

xhci: make sure TRB is fully written before giving it to the controller

2021-01-30T12:25:56+00:00

commit 576667bad341516edc4e18eb85acb0a2b4c9c9d9 upstream. Once the command ring doorbell is rung the xHC controller will parse all command TRBs on the command ring that have the cycle bit set properly. If the driver just started writing the next command TRB to the ring when hardware finished the previous TRB, then HW might fetch an incomplete TRB as long as its cycle bit set correctly. A command TRB is 16 bytes (128 bits) long. Driver writes the command TRB in four 32 bit chunks, with the chunk containing the cycle bit last. This does however not guarantee that chunks actually get written in that order. This was detected in stress testing when canceling URBs with several connected USB devices. Two consecutive "Set TR Dequeue pointer" commands got queued right after each other, and the second one was only partially written when the controller parsed it, causing the dequeue pointer to be set to bogus values. This was seen as error messages: "Mismatch between completed Set TR Deq Ptr command & xHCI internal state" Solution is to add a write memory barrier before writing the cycle bit. Cc: Tested-by: Ross Zwisler Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20210115161907.2875631-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: bdc: Make bdc pci driver depend on BROKEN

2021-01-30T12:25:56+00:00

commit ef02684c4e67d8c35ac83083564135bc7b1d3445 upstream. The bdc pci driver is going to be removed due to it not existing in the wild. This patch turns off compilation of the driver so that stable kernels can also pick up the change. This helps the out-of-tree facetimehd webcam driver as the pci id conflicts with bdc. Cc: Al Cooper Cc: Acked-by: Felipe Balbi Signed-off-by: Patrik Jakobsson Link: https://lore.kernel.org/r/20210118203615.13995-1-patrik.r.jakobsson@gmail.com Signed-off-by: Greg Kroah-Hartman

ehci: fix EHCI host controller initialization sequence

2021-01-30T12:25:56+00:00

commit 280a9045bb18833db921b316a5527d2b565e9f2e upstream. According to EHCI spec, EHCI HC clears USBSTS.HCHalted whenever USBCMD.RS=1. However, it is a good practice to wait some time after setting USBCMD.RS (approximately 100ms) until USBSTS.HCHalted become zero. Without this waiting, VirtualBox's EHCI virtual HC accidentally hangs (see BugLink). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211095 Acked-by: Alan Stern Signed-off-by: Eugene Korenevsky Cc: stable Link: https://lore.kernel.org/r/20210110173609.GA17313@himera.home Signed-off-by: Greg Kroah-Hartman

iio: ad5504: Fix setting power-down state

2021-01-30T12:25:55+00:00

commit efd597b2839a9895e8a98fcb0b76d2f545802cd4 upstream. The power-down mask of the ad5504 is actually a power-up mask. Meaning if a bit is set the corresponding channel is powered up and if it is not set the channel is powered down. The driver currently has this the wrong way around, resulting in the channel being powered up when requested to be powered down and vice versa. Fixes: 3bbbf150ffde ("staging:iio:dac:ad5504: Use strtobool for boolean values") Signed-off-by: Lars-Peter Clausen Acked-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20201209104649.5794-1-lars@metafoo.de Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

can: dev: can_restart: fix use after free bug

2021-01-30T12:25:55+00:00

[ Upstream commit 03f16c5075b22c8902d2af739969e878b0879c94 ] After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/r/20210120114137.200019-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

drm/nouveau/i2c/gm200: increase width of aux semaphore owner fields

2021-01-30T12:25:55+00:00

[ Upstream commit ba6e9ab0fcf3d76e3952deb12b5f993991621d9c ] Noticed while debugging GA102. Signed-off-by: Ben Skeggs Signed-off-by: Sasha Levin

drm/nouveau/bios: fix issue shadowing expansion ROMs

2021-01-30T12:25:55+00:00

[ Upstream commit 402a89660e9dc880710b12773076a336c9dab3d7 ] This issue has generally been covered up by the presence of additional expansion ROMs after the ones we're interested in, with header fetches of subsequent images loading enough of the ROM to hide the issue. Noticed on GA102, which lacks a type 0x70 image compared to TU102,. [ 906.364197] nouveau 0000:09:00.0: bios: 00000000: type 00, 65024 bytes [ 906.381205] nouveau 0000:09:00.0: bios: 0000fe00: type 03, 91648 bytes [ 906.405213] nouveau 0000:09:00.0: bios: 00026400: type e0, 22016 bytes [ 906.410984] nouveau 0000:09:00.0: bios: 0002ba00: type e0, 366080 bytes vs [ 22.961901] nouveau 0000:09:00.0: bios: 00000000: type 00, 60416 bytes [ 22.984174] nouveau 0000:09:00.0: bios: 0000ec00: type 03, 71168 bytes [ 23.010446] nouveau 0000:09:00.0: bios: 00020200: type e0, 48128 bytes [ 23.028220] nouveau 0000:09:00.0: bios: 0002be00: type e0, 140800 bytes [ 23.080196] nouveau 0000:09:00.0: bios: 0004e400: type 70, 7168 bytes Signed-off-by: Ben Skeggs Signed-off-by: Sasha Levin

scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback

2021-01-30T12:25:55+00:00

[ Upstream commit 35fc4cd34426c242ab015ef280853b7bff101f48 ] Users can initiate resets to specific SCSI device/target/host through IOCTL. When this happens, the SCSI cmd passed to eh_device/target/host _reset_handler() callbacks is initialized with a request whose tag is -1. In this case it is not right for eh_device_reset_handler() callback to count on the LUN get from hba->lrb[-1]. Fix it by getting LUN from the SCSI device associated with the SCSI cmd. Link: https://lore.kernel.org/r/1609157080-26283-1-git-send-email-cang@codeaurora.org Reviewed-by: Avri Altman Reviewed-by: Stanley Chu Signed-off-by: Can Guo Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin