kernel/linux.git/drivers, branch v4.3.1

xen/events: Always allocate legacy interrupts on PV guests

2015-12-09T19:34:43+00:00

commit b4ff8389ed14b849354b59ce9b360bdefcdbf99c upstream. After commit 8c058b0b9c34 ("x86/irq: Probe for PIC presence before allocating descs for legacy IRQs") early_irq_init() will no longer preallocate descriptors for legacy interrupts if PIC does not exist, which is the case for Xen PV guests. Therefore we may need to allocate those descriptors ourselves. Signed-off-by: Boris Ostrovsky Suggested-by: Thomas Gleixner Signed-off-by: David Vrabel Cc: Vitaly Kuznetsov Signed-off-by: Greg Kroah-Hartman

staging/lustre: use jiffies for lp_last_query times

2015-12-09T19:34:43+00:00

commit 9f088dba3cc267ea11ec0da318cd0175575b5f9b upstream. The recently introduced lnet_peer_set_alive() function uses get_seconds() to read the current time into a shared variable, but all other uses of that variable compare it to jiffies values. This changes the current use to jiffies as well for consistency. Signed-off-by: Arnd Bergmann Fixes: af3fa7c71bf ("staging/lustre/lnet: peer aliveness status and NI status") Cc: Liang Zhen Cc: James Simmons Cc: Isaac Huang Signed-off-by: Oleg Drokin Signed-off-by: Greg Kroah-Hartman

xhci: Workaround to get Intel xHCI reset working more reliably

2015-12-09T19:34:43+00:00

commit a5964396190d0c40dd549c23848c282fffa5d1f2 upstream. Existing Intel xHCI controllers require a delay of 1 mS, after setting the CMD_RESET bit in command register, before accessing any HC registers. This allows the HC to complete the reset operation and be ready for HC register access. Without this delay, the subsequent HC register access, may result in a system hang, very rarely. Verified CherryView / Braswell platforms go through over 5000 warm reboot cycles (which was not possible without this patch), without any xHCI reset hang. Signed-off-by: Rajmohan Mani Tested-by: Joe Lawrence Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

tty: Fix tty_send_xchar() lock order inversion

2015-12-09T19:34:42+00:00

commit ee0c1a65cf95230d5eb3d9de94fd2ead9a428c67 upstream. The correct lock order is atomic_write_lock => termios_rwsem, as established by tty_write() => n_tty_write(). Fixes: c274f6ef1c666 ("tty: Hold termios_rwsem for tcflow(TCIxxx)") Reported-and-Tested-by: Dmitry Vyukov Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

tty: audit: Fix audit source

2015-12-09T19:34:42+00:00

commit 6b2a3d628aa752f0ab825fc6d4d07b09e274d1c1 upstream. The data to audit/record is in the 'from' buffer (ie., the input read buffer). Fixes: 72586c6061ab ("n_tty: Fix auditing support for cannonical mode") Cc: Miloslav Trmač Signed-off-by: Peter Hurley Acked-by: Laura Abbott Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

ttyFDC: Fix build problems due to use of module_{init,exit}

2015-12-09T19:34:42+00:00

commit 3e8137a185240fa6da0ff91cd9c604716371903b upstream. Commit 0fd972a7d91d (module: relocate module_init from init.h to module.h) broke the build of ttyFDC driver due to that driver's (mis)use of module_mips_cdmm_driver() without first including module.h, for example: In file included from ./arch/mips/include/asm/cdmm.h +11 :0, from drivers/tty/mips_ejtag_fdc.c +34 : include/linux/device.h +1295 :1: warning: data definition has no type or storage class ./arch/mips/include/asm/cdmm.h +84 :2: note: in expansion of macro ‘module_driver’ drivers/tty/mips_ejtag_fdc.c +1157 :1: note: in expansion of macro ‘module_mips_cdmm_driver’ include/linux/device.h +1295 :1: error: type defaults to ‘int’ in declaration of ‘module_init’ [-Werror=implicit-int] ./arch/mips/include/asm/cdmm.h +84 :2: note: in expansion of macro ‘module_driver’ drivers/tty/mips_ejtag_fdc.c +1157 :1: note: in expansion of macro ‘module_mips_cdmm_driver’ drivers/tty/mips_ejtag_fdc.c +1157 :1: warning: parameter names (without types) in function declaration Instead of just adding the module.h include, switch to using the new builtin_mips_cdmm_driver() helper macro and drop the remove callback, since it isn't needed. If module support is added later, the code can always be resurrected. Signed-off-by: James Hogan Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Paul Gortmaker Cc: linux-mips@linux-mips.org Signed-off-by: Greg Kroah-Hartman

usb: xhci: fix checking ep busy for CFC

2015-12-09T19:34:41+00:00

commit 42df7215facf27be8d53e657dd4a12d4ebad0a44 upstream. Function ep_ring_is_processing() checks the dequeue pointer in endpoint context to know whether an endpoint is busy with processing TRBs. This is not correct since dequeue pointer field in an endpoint context is only valid when the endpoint is in Halted or Stopped states. This buggy code causes audio noise when playing sound with USB headset connected to host controllers which support CFC (one of xhci 1.1 features). This patch should exist in stable kernel since v4.3. Reported-and-tested-by: YD Tseng Signed-off-by: Lu Baolu Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

USB: option: add XS Stick W100-2 from 4G Systems

2015-12-09T19:34:41+00:00

commit 638148e20c7f8f6e95017fdc13bce8549a6925e0 upstream. Thomas reports " 4gsystems sells two total different LTE-surfsticks under the same name. .. The newer version of XS Stick W100 is from "omega" .. Under windows the driver switches to the same ID, and uses MI03\6 for network and MI01\6 for modem. .. echo "1c9e 9b01" > /sys/bus/usb/drivers/qmi_wwan/new_id echo "1c9e 9b01" > /sys/bus/usb-serial/drivers/option1/new_id T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b01 Rev=02.32 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Now all important things are there: wwp0s29f7u2i3 (net), ttyUSB2 (at), cdc-wdm0 (qmi), ttyUSB1 (at) There is also ttyUSB0, but it is not usable, at least not for at. The device works well with qmi and ModemManager-NetworkManager. " Reported-by: Thomas Schäfer Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add support for Novatel MiFi USB620L

2015-12-09T19:34:41+00:00

commit e07af133c3e2716db25e3e1e1d9f10c2088e9c1a upstream. Also known as Verizon U620L. The device is modeswitched from 1410:9020 to 1410:9022 by selecting the 4th USB configuration: $ sudo usb_modeswitch –v 0x1410 –p 0x9020 –u 4 This configuration provides a ECM interface as well as TTYs ('Enterprise Mode' according to the U620 Linux integration guide). Signed-off-by: Aleksander Morgado Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: ti_usb_3410_5052: Add Honeywell HGI80 ID

2015-12-09T19:34:40+00:00

commit 1bcb49e663f88bccee35b8688e6a3da2bea31fd4 upstream. The Honeywell HGI80 is a wireless interface to the evohome connected thermostat. It uses a TI 3410 USB-serial port. Signed-off-by: David Woodhouse Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman