kernel/linux.git/drivers, branch v4.14.66

isdn: Disable IIOCDBGVAR

2018-08-22T05:46:11+00:00

[ Upstream commit 5e22002aa8809e2efab2da95855f73f63e14a36c ] It was possible to directly leak the kernel address where the isdn_dev structure pointer was stored. This is a kernel ASLR bypass for anyone with access to the ioctl. The code had been present since the beginning of git history, though this shouldn't ever be needed for normal operation, therefore remove it. Reported-by: Al Viro Cc: Karsten Keil Signed-off-by: Kees Cook Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

misc: sram: fix resource leaks in probe error path

2018-08-22T05:46:11+00:00

commit f294d00961d1d869ecffa60e280eeeee1ccf9a49 upstream. Make sure to disable clocks and deregister any exported partitions before returning on late probe errors. Note that since commit ee895ccdf776 ("misc: sram: fix enabled clock leak on error path"), partitions are deliberately exported before enabling the clock so we stick to that logic here. A follow up patch will address this. Cc: stable # 4.9 Cc: Alexandre Belloni Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: Add ACPI support for uart on Broadcom SoC

2018-08-22T05:46:11+00:00

commit 784c29eda5b4e28c3a56aa90b3815f9a1b0cfdc1 upstream. Add ACPI identifier HID for UART DW 8250 on Broadcom SoCs to match the HID passed through ACPI tables to enable UART controller. Signed-off-by: Srinath Mannam Reviewed-by: Vladimir Olovyannikov Tested-by: Vladimir Olovyannikov Reviewed-by: Andy Shevchenko Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: always set baud rate in dw8250_set_termios

2018-08-22T05:46:10+00:00

commit dfcab6ba573445c703235ab6c83758eec12d7f28 upstream. dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is NULL. This happens during resume. Call Trace: ... [ 54.928108] dw8250_set_termios+0x162/0x170 [ 54.928114] serial8250_set_termios+0x17/0x20 [ 54.928117] uart_change_speed+0x64/0x160 [ 54.928119] uart_resume_port ... So the baud rate is not restored after S3 and breaks the apps who use UART, for example, console and bluetooth etc. We address this issue by setting the baud rate irrespective of arg "old", just like the drivers for other 8250 IPs. This is tested with Intel Broxton platform. Signed-off-by: Chen Hu Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms") Cc: Heikki Krogerus Cc: stable Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

serial: 8250_exar: Read INT0 from slave device, too

2018-08-22T05:46:10+00:00

commit 60ab0fafc4b652fcaf7cbc3bb8555a0cf1149c28 upstream. The sleep wake-up refactoring that I introduced in commit c7e1b4059075 ("tty: serial: exar: Relocate sleep wake-up handling") did not account for devices with a slave device on the expansion port. This patch pokes the INT0 register in the slave device, if present, in order to ensure that MSI interrupts don't get permanently "stuck" because of a sleep wake-up interrupt as described here: commit 2c0ac5b48a35 ("serial: exar: Fix stuck MSIs") This also converts an ioread8() to readb() in order to provide visual consistency with the MMIO-only accessors used elsewhere in the driver. Reported-by: Andy Shevchenko Signed-off-by: Aaron Sierra Fixes: c7e1b4059075 ("tty: serial: exar: Relocate sleep wake-up handling") Reviewed-by: Andy Shevchenko Cc: stable Signed-off-by: Greg Kroah-Hartman

tty: serial: 8250: Revert NXP SC16C2552 workaround

2018-08-22T05:46:10+00:00

commit 47ac76662ca9c5852fd353093f19de3ae85f2e66 upstream. Revert commit ecb988a3b7985913d1f0112f66667cdd15e40711: tty: serial: 8250: 8250_core: NXP SC16C2552 workaround The above commit causes userland application to no longer write correctly its first write to a dumb terminal connected to /dev/ttyS0. This commit seems to be the culprit. It's as though the TX FIFO is being reset during that write. What should be displayed is: PSW 80000000 INST 00000000 HALT // What is displayed is some variation of: T 00000000 HAL// Reverting this commit via this patch fixes my problem. Signed-off-by: Mark Hounschell Fixes: ecb988a3b798 ("tty: serial: 8250: 8250_core: NXP SC16C2552 workaround") Cc: stable Signed-off-by: Greg Kroah-Hartman

ACPI / PM: save NVS memory for ASUS 1025C laptop

2018-08-22T05:46:10+00:00

commit 231f9415001138a000cd0f881c46654b7ea3f8c5 upstream. Every time I tried to upgrade my laptop from 3.10.x to 4.x I faced an issue by which the fan would run at full speed upon resume. Bisecting it showed me the issue was introduced in 3.17 by commit 821d6f0359b0 (ACPI / sleep: Do not save NVS for new machines to accelerate S3). This code only affects machines built starting as of 2012, but this Asus 1025C laptop was made in 2012 and apparently needs the NVS data to be saved, otherwise the CPU's thermal state is not properly reported on resume and the fan runs at full speed upon resume. Here's a very simple way to check if such a machine is affected : # cat /sys/class/thermal/thermal_zone0/temp 55000 ( now suspend, wait one second and resume ) # cat /sys/class/thermal/thermal_zone0/temp 0 (and after ~15 seconds the fan starts to spin) Let's apply the same quirk as commit cbc00c13 (ACPI: save NVS memory for Lenovo G50-45) and reuse the function it provides. Note that this commit was already backported to 4.9.x but not 4.4.x. Cc: 3.17+ # 3.17+: requires cbc00c13 Signed-off-by: Willy Tarreau Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

USB: option: add support for DW5821e

2018-08-22T05:46:10+00:00

commit 7bab01ecc6c43da882333c6db39741cb43677004 upstream. The device exposes AT, NMEA and DIAG ports in both USB configurations. The patch explicitly ignores interfaces 0 and 1, as they're bound to other drivers already; and also interface 6, which is a GNSS interface for which we don't have a driver yet. T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Aleksander Morgado Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: serial: pl2303: add a new device id for ATEN

2018-08-22T05:46:10+00:00

commit 29c692c96b3a39cd1911fb79cd2505af8d070f07 upstream. Signed-off-by: Movie Song Cc: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: serial: sierra: fix potential deadlock at close

2018-08-22T05:46:10+00:00

commit e60870012e5a35b1506d7b376fddfb30e9da0b27 upstream. The portdata spinlock can be taken in interrupt context (via sierra_outdat_callback()). Disable interrupts when taking the portdata spinlock when discarding deferred URBs during close to prevent a possible deadlock. Fixes: 014333f77c0b ("USB: sierra: fix urb and memory leak on disconnect") Cc: stable Signed-off-by: John Ogness Signed-off-by: Sebastian Andrzej Siewior [ johan: amend commit message and add fixes and stable tags ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman