kernel/linux.git/drivers, branch v4.14.60

xen-netfront: wait xenbus state change when load module manually

2018-08-03T05:50:44+00:00

[ Upstream commit 822fb18a82abaf4ee7058793d95d340f5dab7bfc ] When loading module manually, after call xenbus_switch_state to initializes the state of the netfront device, the driver state did not change so fast that may lead no dev created in latest kernel. This patch adds wait to make sure xenbus knows the driver is not in closed/unknown state. Current state: [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Cannot get device settings: No such device Cannot get wake-on-lan settings: No such device Cannot get message level: No such device Cannot get link status: No such device No data available With the patch installed. [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Link detected: yes Signed-off-by: Xiao Liang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

NET: stmmac: align DMA stuff to largest cache line length

2018-08-03T05:50:44+00:00

[ Upstream commit 9939a46d90c6c76f4533d534dbadfa7b39dc6acc ] As for today STMMAC_ALIGN macro (which is used to align DMA stuff) relies on L1 line length (L1_CACHE_BYTES). This isn't correct in case of system with several cache levels which might have L1 cache line length smaller than L2 line. This can lead to sharing one cache line between DMA buffer and other data, so we can lose this data while invalidate DMA buffer before DMA transaction. Fix that by using SMP_CACHE_BYTES instead of L1_CACHE_BYTES for aligning. Signed-off-by: Eugeniy Paltsev Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: mdio-mux: bcm-iproc: fix wrong getter and setter pair

2018-08-03T05:50:44+00:00

[ Upstream commit b0753408aadf32c7ece9e6b765017881e54af833 ] mdio_mux_iproc_probe() uses platform_set_drvdata() to store md pointer in device, whereas mdio_mux_iproc_remove() restores md pointer by dev_get_platdata(&pdev->dev). This leads to wrong resources release. The patch replaces getter to platform_get_drvdata. Fixes: 98bc865a1ec8 ("net: mdio-mux: Add MDIO mux driver for iProc SoCs") Signed-off-by: Anton Vasilyev Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: lan78xx: fix rx handling before first packet is send

2018-08-03T05:50:44+00:00

[ Upstream commit 136f55f660192ce04af091642efc75d85e017364 ] As long the bh tasklet isn't scheduled once, no packet from the rx path will be handled. Since the tx path also schedule the same tasklet this situation only persits until the first packet transmission. So fix this issue by scheduling the tasklet after link reset. Link: https://github.com/raspberrypi/linux/issues/2617 Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Suggested-by: Floris Bos Signed-off-by: Stefan Wahren Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: fix amd-xgbe flow-control issue

2018-08-03T05:50:44+00:00

[ Upstream commit 7f3fc7ddf719cd6faaf787722c511f6918ac6aab ] If we enable or disable xgbe flow-control by ethtool , it does't work.Because the parameter is not properly assigned,so we need to adjust the assignment order of the parameters. Fixes: c1ce2f77366b ("amd-xgbe: Fix flow control setting logic") Signed-off-by: tangpengpeng Acked-by: Tom Lendacky Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ena: Fix use of uninitialized DMA address bits field

2018-08-03T05:50:44+00:00

[ Upstream commit 101f0cd4f2216d32f1b8a75a2154cf3997484ee2 ] UBSAN triggers the following undefined behaviour warnings: [...] [ 13.236124] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:468:22 [ 13.240043] shift exponent 64 is too large for 64-bit type 'long long unsigned int' [...] [ 13.744769] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:373:4 [ 13.748694] shift exponent 64 is too large for 64-bit type 'long long unsigned int' [...] When splitting the address to high and low, GENMASK_ULL is used to generate a bitmask with dma_addr_bits field from io_sq (in ena_com_prepare_tx and ena_com_add_single_rx_desc). The problem is that dma_addr_bits is not initialized with a proper value (besides being cleared in ena_com_create_io_queue). Assign dma_addr_bits the correct value that is stored in ena_dev when initializing the SQ. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Gal Pressman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: qca8k: Allow overwriting CPU port setting

2018-08-03T05:50:44+00:00

commit 9bb2289f90e671bdb78e306974187424ac19ff8e upstream. Implement adjust_link function that allows to overwrite default CPU port setting using fixed-link device tree subnode. Signed-off-by: Michal Vokáč Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: qca8k: Enable RXMAC when bringing up a port

2018-08-03T05:50:43+00:00

commit eee1fe64765c562d8bcaf95e5631a8ea2f760f34 upstream. When a port is brought up/down do not enable/disable only the TXMAC but the RXMAC as well. This is essential for the CPU port to work. Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by: Michal Vokáč Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: qca8k: Force CPU port to its highest bandwidth

2018-08-03T05:50:43+00:00

commit 79a4ed4f0f93fc65e48a0fc5247ffa5645f7b0cc upstream. By default autonegotiation is enabled to configure MAC on all ports. For the CPU port autonegotiation can not be used so we need to set some sensible defaults manually. This patch forces the default setting of the CPU port to 1000Mbps/full duplex which is the chip maximum capability. Also correct size of the bit field used to configure link speed. Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by: Michal Vokáč Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

RDMA/uverbs: Protect from attempts to create flows on unsupported QP

2018-08-03T05:50:43+00:00

commit 940efcc8889f0d15567eb07fc9fd69b06e366aa5 upstream. Flows can be created on UD and RAW_PACKET QP types. Attempts to provide other QP types as an input causes to various unpredictable failures. The reason is that in order to support all various types (e.g. XRC), we are supposed to use real_qp handle and not qp handle and expect to driver/FW to fail such (XRC) flows. The simpler and safer variant is to ban all QP types except UD and RAW_PACKET, instead of relying on driver/FW. Cc: # 3.11 Fixes: 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs") Cc: syzkaller Reported-by: Noa Osherovich Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman