kernel/linux.git/drivers, branch v4.14.233

xhci: Do not use GFP_KERNEL in (potentially) atomic context

2021-05-22T08:57:43+00:00

commit dda32c00c9a0fa103b5d54ef72c477b7aa993679 upstream. 'xhci_urb_enqueue()' is passed a 'mem_flags' argument, because "URBs may be submitted in interrupt context" (see comment related to 'usb_submit_urb()' in 'drivers/usb/core/urb.c') So this flag should be used in all the calling chain. Up to now, 'xhci_check_maxpacket()' which is only called from 'xhci_urb_enqueue()', uses GFP_KERNEL. Be safe and pass the mem_flags to this function as well. Fixes: ddba5cd0aeff ("xhci: Use command structures when queuing commands on the command ring") Cc: Signed-off-by: Christophe JAILLET Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20210512080816.866037-4-mathias.nyman@linux.intel.com [iwamatsu: Adjust context] Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Greg Kroah-Hartman

serial: 8250: fix potential deadlock in rs485-mode

2021-05-22T08:57:43+00:00

[ Upstream commit b86f86e8e7c5264bb8f5835d60f9ec840d9f5a7a ] Canceling hrtimer when holding uart spinlock can deadlock. CPU0: syscall write -> get uart port spinlock -> write uart -> start_tx_rs485 -> hrtimer_cancel -> wait for hrtimer callback to finish CPU1: hrtimer IRQ -> run hrtimer -> em485_handle_stop_tx -> get uart port spinlock CPU0 is waiting for the hrtimer callback to finish, but the hrtimer callback running on CPU1 is waiting to get the uart port spinlock. This deadlock can be avoided by not canceling the hrtimers in these paths. Setting active_timer=NULL can be done without accessing hrtimer, and that will effectively cancel operations that would otherwise have been performed by the hrtimer callback. Signed-off-by: Tomas Melin Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055

2021-05-22T08:57:42+00:00

[ Upstream commit da91ece226729c76f60708efc275ebd4716ad089 ] Like some other Bay and Cherry Trail SoC based devices the Dell Venue 10 Pro 5055 has an embedded-controller which uses ACPI GPIO events to report events instead of using the standard ACPI EC interface for this. The EC interrupt is only used to report battery-level changes and it keeps doing this while the system is suspended, causing the system to not stay suspended. Add an ignore-wake quirk for the GPIO pin used by the EC to fix the spurious wakeups from suspend. Signed-off-by: Hans de Goede Acked-by: Andy Shevchenko Signed-off-by: Andy Shevchenko Signed-off-by: Sasha Levin

Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state

2021-05-22T08:57:42+00:00

[ Upstream commit e479187748a8f151a85116a7091c599b121fdea5 ] Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices

2021-05-22T08:57:42+00:00

[ Upstream commit 65299e8bfb24774e6340e93ae49f6626598917c8 ] Several users have been reporting that elants_i2c gives several errors during probe and that their touchscreen does not work on their Lenovo AMD based laptops with a touchscreen with a ELAN0001 ACPI hardware-id: [ 0.550596] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vcc33 not found, using dummy regulator [ 0.551836] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vccio not found, using dummy regulator [ 0.560932] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.562427] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.595925] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.597974] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.621893] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.622504] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.632650] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (4d 61 69 6e): -121 [ 0.634256] elants_i2c i2c-ELAN0001:00: boot failed: -121 [ 0.699212] elants_i2c i2c-ELAN0001:00: invalid 'hello' packet: 00 00 ff ff [ 1.630506] elants_i2c i2c-ELAN0001:00: Failed to read fw id: -121 [ 1.645508] elants_i2c i2c-ELAN0001:00: unknown packet 00 00 ff ff Despite these errors, the elants_i2c driver stays bound to the device (it returns 0 from its probe method despite the errors), blocking the i2c-hid driver from binding. Manually unbinding the elants_i2c driver and binding the i2c-hid driver makes the touchscreen work. Check if the ACPI-fwnode for the touchscreen contains one of the i2c-hid compatiblity-id strings and if it has the I2C-HID spec's DSM to get the HID descriptor address, If it has both then make elants_i2c not bind, so that the i2c-hid driver can bind. This assumes that non of the (older) elan touchscreens which actually need the elants_i2c driver falsely advertise an i2c-hid compatiblity-id + DSM in their ACPI-fwnodes. If some of them actually do have this false advertising, then this change may lead to regressions. While at it also drop the unnecessary DEVICE_NAME prefixing of the "I2C check functionality error", dev_err already outputs the driver-name. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207759 Acked-by: Benjamin Tissoires Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210405202756.16830-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

ACPI / hotplug / PCI: Fix reference count leak in enable_slot()

2021-05-22T08:57:42+00:00

[ Upstream commit 3bbfd319034ddce59e023837a4aa11439460509b ] In enable_slot(), if pci_get_slot() returns NULL, we clear the SLOT_ENABLED flag. When pci_get_slot() finds a device, it increments the device's reference count. In this case, we did not call pci_dev_put() to decrement the reference count, so the memory of the device (struct pci_dev type) will eventually leak. Call pci_dev_put() to decrement its reference count when pci_get_slot() returns a PCI device. Link: https://lore.kernel.org/r/b411af88-5049-a1c6-83ac-d104a1f429be@huawei.com Signed-off-by: Feilong Lin Signed-off-by: Zhiqiang Liu Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PCI: thunder: Fix compile testing

2021-05-22T08:57:42+00:00

[ Upstream commit 16f7ae5906dfbeff54f74ec75d0563bb3a87ab0b ] Compile-testing these drivers is currently broken. Enabling it causes a couple of build failures though: drivers/pci/controller/pci-thunder-ecam.c:119:30: error: shift count >= width of type [-Werror,-Wshift-count-overflow] drivers/pci/controller/pci-thunder-pem.c:54:2: error: implicit declaration of function 'writeq' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-thunder-pem.c:392:8: error: implicit declaration of function 'acpi_get_rc_resources' [-Werror,-Wimplicit-function-declaration] Fix them with the obvious one-line changes. Link: https://lore.kernel.org/r/20210308152501.2135937-2-arnd@kernel.org Signed-off-by: Arnd Bergmann Signed-off-by: Bjorn Helgaas Reviewed-by: Kuppuswamy Sathyanarayanan Reviewed-by: Robert Richter Signed-off-by: Sasha Levin

isdn: capi: fix mismatched prototypes

2021-05-22T08:57:42+00:00

commit 5ee7d4c7fbc9d3119a20b1c77d34003d1f82ac26 upstream. gcc-11 complains about a prototype declaration that is different from the function definition: drivers/isdn/capi/kcapi.c:724:44: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=] 724 | u16 capi20_get_manufacturer(u32 contr, u8 *buf) | ~~~~^~~ In file included from drivers/isdn/capi/kcapi.c:13: drivers/isdn/capi/kcapi.h:62:43: note: previously declared as an array ‘u8[64]’ {aka ‘unsigned char[64]’} 62 | u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]); | ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/isdn/capi/kcapi.c:790:38: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=] 790 | u16 capi20_get_serial(u32 contr, u8 *serial) | ~~~~^~~~~~ In file included from drivers/isdn/capi/kcapi.c:13: drivers/isdn/capi/kcapi.h:64:37: note: previously declared as an array ‘u8[8]’ {aka ‘unsigned char[8]’} 64 | u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]); | ~~~^~~~~~~~~~~~~~~~~~~~~~~ Change the definition to make them match. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

cxgb4: Fix the -Wmisleading-indentation warning

2021-05-22T08:57:42+00:00

commit ea8146c6845799142aa4ee2660741c215e340cdf upstream. Fix the gcc warning: drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c:2673:9: warning: this 'for' clause does not guard... [-Wmisleading-indentation] 2673 | for (i = 0; i < n; ++i) \ Reported-by: Tosk Robot Signed-off-by: Kaixu Xia Link: https://lore.kernel.org/r/1604467444-23043-1-git-send-email-kaixuxia@tencent.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

usb: sl811-hcd: improve misleading indentation

2021-05-22T08:57:42+00:00

commit 8460f6003a1d2633737b89c4f69d6f4c0c7c65a3 upstream. gcc-11 now warns about a confusingly indented code block: drivers/usb/host/sl811-hcd.c: In function ‘sl811h_hub_control’: drivers/usb/host/sl811-hcd.c:1291:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation] 1291 | if (*(u16*)(buf+2)) /* only if wPortChange is interesting */ | ^~ drivers/usb/host/sl811-hcd.c:1295:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’ 1295 | break; Rewrite this to use a single if() block with the __is_defined() macro. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210322164244.827589-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman