kernel/linux.git/drivers, branch v4.14.111

ACPI / video: Extend chassis-type detection with a "Lunch Box" check

2019-04-05T20:31:40+00:00

[ Upstream commit d693c008e3ca04db5916ff72e68ce661888a913b ] Commit 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true on Win8-ready _desktops_") introduced chassis type detection, limiting the lcd_only check for the backlight to devices where the chassis-type indicates their is no builtin LCD panel. The purpose of the lcd_only check is to avoid advertising a backlight interface on desktops, since skylake and newer machines seem to always have a backlight interface even if there is no LCD panel. The limiting of this check to desktops only was done to avoid breaking backlight support on some laptops which do not have the lcd flag set. The Fujitsu ESPRIMO Q910 which is a compact (NUC like) desktop machine has a chassis type of 0x10 aka "Lunch Box". Without the lcd_only check we end up falsely advertising backlight/brightness control on this device. This commit extend the dmi_is_desktop check to return true for type 0x10 to fix this. Fixes: 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true ...") Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers

2019-04-05T20:31:40+00:00

[ Upstream commit c978ae9bde582e82a04c63a4071701691dd8b35c ] We aren't supposed to force a stop+start between every i2c msg when performing multi message transfers. This should eg. cause the DDC segment address to be reset back to 0 between writing the segment address and reading the actual EDID extension block. To quote the E-DDC spec: "... this standard requires that the segment pointer be reset to 00h when a NO ACK or a STOP condition is received." Since we're going to touch this might as well consult the I2C_M_STOP flag to determine whether we want to force the stop or not. Cc: Brian Vincent References: https://bugs.freedesktop.org/show_bug.cgi?id=108081 Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.com Reviewed-by: Dhinakaran Pandiyan Signed-off-by: Sasha Levin

dmaengine: tegra: avoid overflow of byte tracking

2019-04-05T20:31:40+00:00

[ Upstream commit e486df39305864604b7e25f2a95d51039517ac57 ] The dma_desc->bytes_transferred counter tracks the number of bytes moved by the DMA channel. This is then used to calculate the information passed back in the in the tegra_dma_tx_status callback, which is usually fine. When the DMA channel is configured as continous, then the bytes_transferred counter will increase over time and eventually overflow to become negative so the residue count will become invalid and the ALSA sound-dma code will report invalid hardware pointer values to the application. This results in some users becoming confused about the playout position and putting audio data in the wrong place. To fix this issue, always ensure the bytes_transferred field is modulo the size of the request. We only do this for the case of the cyclic transfer done ISR as anyone attempting to move 2GiB of DMA data in one transfer is unlikely. Note, we don't fix the issue that we should /never/ transfer a negative number of bytes so we could make those fields unsigned. Reviewed-by: Dmitry Osipenko Signed-off-by: Ben Dooks Acked-by: Jon Hunter Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

clk: rockchip: fix frac settings of GPLL clock for rk3328

2019-04-05T20:31:40+00:00

[ Upstream commit a0e447b0c50240a90ab84b7126b3c06b0bab4adc ] This patch fixes settings of GPLL frequency in fractional mode for rk3328. In this mode, FOUTVCO is calcurated by following formula: FOUTVCO = FREF * FBDIV / REFDIV + ((FREF * FRAC / REFDIV) >> 24) The problem is in FREF * FRAC >> 24 term. This result always lacks one from target value is specified by rate member. For example first itme of rk3328_pll_frac_rate originally has - rate : 1016064000 - refdiv: 3 - fbdiv : 127 - frac : 134217 - FREF * FBDIV / REFDIV = 1016000000 - (FREF * FRAC / REFDIV) >> 24 = 63999 Thus calculated rate is 1016063999. It seems wrong. If frac has 134218 (it is increased 1 from original value), second term is 64000. All other items have same situation. So this patch adds 1 to frac member in all items of rk3328_pll_frac_rate. Signed-off-by: Katsuhiro Suzuki Acked-by: Elaine Zhang Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin

wlcore: Fix memory leak in case wl12xx_fetch_firmware failure

2019-04-05T20:31:40+00:00

[ Upstream commit ba2ffc96321c8433606ceeb85c9e722b8113e5a7 ] Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware failed instead of meaningless goto out to avoid the following memory leak reports(Only the last one listed): unreferenced object 0xc28a9a00 (size 512): comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<6624adab>] kmemleak_alloc+0x40/0x74 [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270 [] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore] [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore] [] drv_add_interface+0xa4/0x1a0 [mac80211] [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211] [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211] [<7e1d425a>] process_one_work+0x284/0x42c [<55f9432e>] worker_thread+0x2fc/0x48c [] kthread+0x148/0x160 [<63144b13>] ret_from_fork+0x14/0x2c [< (null)>] (null) [<1f6e7715>] 0xffffffff Signed-off-by: Zumeng Chen Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

drm/nouveau: Stop using drm_crtc_force_disable

2019-04-05T20:31:39+00:00

[ Upstream commit 934c5b32a5e43d8de2ab4f1566f91d7c3bf8cb64 ] The correct way for legacy drivers to update properties that need to do a full modeset, is to do a full modeset. Note that we don't need to call the drm_mode_config_internal helper because we're not changing any of the refcounted paramters. v2: Fixup error handling (Ville). Since the old code didn't bother I decided to just delete it instead of adding even more code for just error handling. Cc: Ville Syrjälä Reviewed-by: Alex Deucher (v1) Cc: Sean Paul Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-2-daniel.vetter@ffwll.ch Signed-off-by: Sasha Levin

drm: Auto-set allow_fb_modifiers when given modifiers at plane init

2019-04-05T20:31:39+00:00

[ Upstream commit 890880ddfdbe256083170866e49c87618b706ac7 ] When drivers pass non-empty lists of modifiers for initializing their planes, we can infer that they allow framebuffer modifiers and set the driver's allow_fb_modifiers mode config element. In case the allow_fb_modifiers element was not set (some drivers tend to set them after registering planes), the modifiers will still be registered but won't be available to userspace unless the flag is set later. However in that case, the IN_FORMATS blob won't be created. In order to avoid this case and generally reduce the trouble associated with the flag, always set allow_fb_modifiers when a non-empty list of format modifiers is passed at plane init. Reviewed-by: Daniel Vetter Signed-off-by: Paul Kocialkowski Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190104085610.5829-1-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin

regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting

2019-04-05T20:31:39+00:00

[ Upstream commit f01a7beb6791f1c419424c1a6958b7d0a289c974 ] The act8600_sudcdc_voltage_ranges setting does not match the datasheet. The problems in below entry: REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000), 1. The off-by-one min_sel causes wrong volatage calculation. The min_sel should be 192. 2. According to the datasheet[1] Table 7. (on page 43): The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V. Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM. [1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf Fixes: df3a950e4e73 ("regulator: act8865: Add act8600 support") Signed-off-by: Axel Lin Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration

2019-04-05T20:31:39+00:00

[ Upstream commit 49710c32cd9d6626a77c9f5f978a5f58cb536b35 ] Previously when doing format enumeration, it was returning all formats supported by driver, even if they're not supported by hw. Add missing check for fmt_ver_flag, so it'll be fixed and only those supported by hw will be returned. Similar thing is already done in s5p_jpeg_find_format. It was found by using v4l2-compliance tool and checking result of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test and using v4l2-ctl to get list of all supported formats. Tested on s5pv210-galaxys (Samsung i9000 phone). Fixes: bb677f3ac434 ("[media] Exynos4 JPEG codec v4l2 driver") Signed-off-by: Pawe? Chmiel Reviewed-by: Jacek Anaszewski [hverkuil-cisco@xs4all.nl: fix a few alignment issues] Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

dmaengine: qcom_hidma: initialize tx flags in hidma_prep_dma_*

2019-04-05T20:31:39+00:00

[ Upstream commit 875aac8a46424e5b73a9ff7f40b83311b609e407 ] In async_tx_test_ack(), it uses flags in struct dma_async_tx_descriptor to check the ACK status. As hidma reuses the descriptor in a free list when hidma_prep_dma_*(memcpy/memset) is called, the flag will keep ACKed if the descriptor has been used before. This will cause a BUG_ON in async_tx_quiesce(). kernel BUG at crypto/async_tx/async_tx.c:282! Internal error: Oops - BUG: 0 1 SMP ... task: ffff8017dd3ec000 task.stack: ffff8017dd3e8000 PC is at async_tx_quiesce+0x54/0x78 [async_tx] LR is at async_trigger_callback+0x98/0x110 [async_tx] This patch initializes flags in dma_async_tx_descriptor by the flags passed from the caller when hidma_prep_dma_*(memcpy/memset) is called. Cc: Joey Zheng Reviewed-by: Sinan Kaya Signed-off-by: Shunyong Yang Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin