kernel/linux.git/drivers, branch v4.0.7

drm/i915: Avoid GPU hang when coming out of s3 or s4

2015-06-29T19:29:08+00:00

commit 364aece01a2dd748fc36a1e8bf52ef639b0857bd upstream. This patch fixes a timing issue that causes a GPU hang when the system comes out of power saving. During pm_resume, We are submitting batchbuffers before enabling Interrupts this is causing us to miss the context switch interrupt, and in consequence intel_execlists_handle_ctx_events is not triggered. This patch is based on a patch from Deepak S from another platform. The patch fixes an issue introduced by: commit e7778be1eab918274f79603d7c17b3ec8be77386 drm/i915: Fix startup failure in LRC mode after recent init changes The above patch added a call to init_context() to fix an issue introduced by a previous patch. But, it then opened up a small timing window for the batches being added by the init_context (basically setting up the context) to complete before the interrupts have been turned on, thus hanging the GPU. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89600 Cc: stable@vger.kernel.org # 4.0+ Signed-off-by: Peter Antoine Reviewed-by: Daniel Vetter [Jani: fixed typo in subject, massaged the comments a bit] Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman

dm: fix NULL pointer when clone_and_map_rq returns !DM_MAPIO_REMAPPED

2015-06-29T19:29:08+00:00

commit 3a1407559a593d4360af12dd2df5296bf8eb0d28 upstream. When stacking request-based DM on blk_mq device, request cloning and remapping are done in a single call to target's clone_and_map_rq(). The clone is allocated and valid only if clone_and_map_rq() returns DM_MAPIO_REMAPPED. The "IS_ERR(clone)" check in map_request() does not cover all the !DM_MAPIO_REMAPPED cases that are possible (E.g. if underlying devices are not ready or unavailable, clone_and_map_rq() may return DM_MAPIO_REQUEUE without ever having established an ERR_PTR). Fix this by explicitly checking for a return that is not DM_MAPIO_REMAPPED in map_request(). Without this fix, DM core may call setup_clone() for a NULL clone and oops like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 IP: [] blk_rq_prep_clone+0x7d/0x137 ... CPU: 2 PID: 5793 Comm: kdmwork-253:3 Not tainted 4.0.0-nm #1 ... Call Trace: [] map_tio_request+0xa9/0x258 [dm_mod] [] kthread_worker_fn+0xfd/0x150 [] ? kthread_parkme+0x24/0x24 [] ? kthread_parkme+0x24/0x24 [] kthread+0xe6/0xee [] ? put_lock_stats+0xe/0x20 [] ? __init_kthread_worker+0x5b/0x5b [] ret_from_fork+0x58/0x90 [] ? __init_kthread_worker+0x5b/0x5b Fixes: e5863d9ad ("dm: allocate requests in target when stacking on blk-mq devices") Reported-by: Bart Van Assche Signed-off-by: Jun'ichi Nomura Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

cdc-acm: Add support of ATOL FPrint fiscal printers

2015-06-29T19:29:08+00:00

commit 15bf722e6f6c0b884521a0363204532e849deb7f upstream. ATOL FPrint fiscal printers require usb_clear_halt to be executed to work properly. Add quirk to fix the issue. Signed-off-by: Alexey Sokolov Signed-off-by: Greg Kroah-Hartman

b43: fix support for 14e4:4321 PCI dev with BCM4321 chipset

2015-06-29T19:29:08+00:00

commit 90f91b129810c3f169e443252be30ed7c0130326 upstream. It seems Broadcom released two devices with conflicting device id. There are for sure 14e4:4321 PCI devices with BCM4321 (N-PHY) chipset, they can be found in routers, e.g. Netgear WNR834Bv2. However, according to Broadcom public sources 0x4321 is also used for 5 GHz BCM4306 (G-PHY). It's unsure if they meant PCI device id, or "virtual" id (from SPROM). To distinguish these devices lets check PHY type (G vs. N). Signed-off-by: Rafał Miłecki Cc: # 3.16+ Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

ath3k: add support of 13d3:3474 AR3012 device

2015-06-29T19:29:08+00:00

commit 0d0cef6183aec0fb6d0c9f00a09ff51ee086bbe2 upstream. BugLink: https://bugs.launchpad.net/bugs/1427680 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3474 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

ath3k: Add support of 0489:e076 AR3012 device

2015-06-29T19:29:08+00:00

commit 692c062e7c282164fd7cda68077f79dafd176eaf upstream. BugLink: https://bugs.launchpad.net/bugs/1462614 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=06 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e076 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Dmitry Tunin Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

drm/radeon: Add RADEON_INFO_VA_UNMAP_WORKING query

2015-06-29T19:29:08+00:00

commit 3bc980bf19bb62007e923691fa2869ba113be895 upstream. This tells userspace that it's safe to use the RADEON_VA_UNMAP operation of the DRM_RADEON_GEM_VA ioctl. Signed-off-by: Michel Dänzer Signed-off-by: Christian König Signed-off-by: Greg Kroah-Hartman

Revert "drm/i915: Don't skip request retirement if the active list is empty"

2015-06-29T19:29:07+00:00

commit 245ec9d85696c3e539b23e210f248698b478379c upstream. This reverts commit 0aedb1626566efd72b369c01992ee7413c82a0c5. I messed things up while applying [1] to drm-intel-fixes. Rectify. [1] http://mid.gmane.org/1432827156-9605-1-git-send-email-ville.syrjala@linux.intel.com Fixes: 0aedb1626566 ("drm/i915: Don't skip request retirement if the active list is empty") Acked-by: Ville Syrjälä Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman

drm/i915: Always reset vma->ggtt_view.pages cache on unbinding

2015-06-29T19:29:07+00:00

commit 016a65a39170c3cdca09a6ac343ff4f124668b45 upstream. With the introduction of multiple views of an obj in the same vm, each vma was taught to cache its copy of the pages (so that different views could have different page arrangements). However, this missed decoupling those vma->ggtt_view.pages when the vma released its reference on the obj->pages. As we don't always free the vma, this leads to a possible scenario (e.g. execbuffer interrupted by the shrinker) where the vma points to a stale obj->pages, and explodes. Fixes regression from commit fe14d5f4e5468c5b80a24f1a64abcbe116143670 Author: Tvrtko Ursulin Date: Wed Dec 10 17:27:58 2014 +0000 drm/i915: Infrastructure for supporting different GGTT views per object Tvrtko says, if someone else will be confused how this can happen, key is the reservation execbuffer path. That puts the VMA on the exec_list which prevents i915_vma_unbind and i915_gem_vma_destroy from fully destroying the VMA. So the VMA is left existing as an empty object in the list - unbound and disassociated with the backing store. Kind of a cached memory object. And then re-using it needs to clear the cached pages pointer which is fixed above. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1227892 Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: Daniel Vetter Cc: Michel Thierry Reviewed-by: Tvrtko Ursulin [Jani: Added Tvrtko's explanation to commit message.] Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman

drm/mgag200: Reject non-character-cell-aligned mode widths

2015-06-29T19:29:07+00:00

commit 25161084b1c1b0c29948f6f77266a35f302196b7 upstream. Turns out 1366x768 does not in fact work on this hardware. Signed-off-by: Adam Jackson Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman