kernel/linux.git/drivers, branch v3.5.3

IB/srp: Fix a race condition

2012-08-26T02:31:45+00:00

commit 220329916c72ee3d54ae7262b215a050f04a18fc upstream. Avoid a crash caused by the scmnd->scsi_done(scmnd) call in srp_process_rsp() being invoked with scsi_done == NULL. This can happen if a reply is received during or after a command abort. Reported-by: Joseph Glanville Reference: http://marc.info/?l=linux-rdma&m=134314367801595 Acked-by: David Dillow Signed-off-by: Bart Van Assche Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman

pmac_zilog,kdb: Fix console poll hook to return instead of loop

2012-08-26T02:31:45+00:00

commit 38f8eefccf3a23c4058a570fa2938a4f553cf8e0 upstream. kdb <-> kgdb transitioning does not work properly with this UART driver because the get character routine loops indefinitely as opposed to returning NO_POLL_CHAR per the expectation of the KDB I/O driver API. The symptom is a kernel hang when trying to switch debug modes. Signed-off-by: Jason Wessel Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

rt2x00: Add support for BUFFALO WLI-UC-GNM2 to rt2800usb.

2012-08-26T02:31:44+00:00

commit a769f9577232afe2c754606a83aad85127e7052a upstream. This is a RT3070 based device. Signed-off-by: Jeongdo Son Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

usb: gadget: u_ether: fix kworker 100% CPU issue with still used interfaces in eth_stop

2012-08-26T02:31:44+00:00

commit b1b552a69b8805e7e338074a9e8b670b4a795218 upstream. This patch fixes an issue introduced by patch: 72c973d usb: gadget: add usb_endpoint_descriptor to struct usb_ep Without this patch we see a kworker taking 100% CPU, after this sequence: - Connect gadget to a windows host - load g_ether - ifconfig up ; ifconfig down; ifconfig up - ping The "ifconfig down" results in calling eth_stop(), which will call usb_ep_disable() and, if the carrier is still ok, usb_ep_enable(): usb_ep_disable(link->in_ep); usb_ep_disable(link->out_ep); if (netif_carrier_ok(net)) { usb_ep_enable(link->in_ep); usb_ep_enable(link->out_ep); } The ep should stay enabled, but will not, as ep_disable set the desc pointer to NULL, therefore the subsequent ep_enable will fail. This leads to permanent rescheduling of the eth_work() worker as usb_ep_queue() (called by the worker) will fail due to the unconfigured endpoint. We fix this issue by saving the ep descriptors and re-assign them before usb_ep_enable(). Cc: Tatyana Brokhman Signed-off-by: Michael Grzeschik Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

usb: serial: mos7840: Fixup mos7840_chars_in_buffer()

2012-08-26T02:31:44+00:00

commit 5c263b92f828af6a8cf54041db45ceae5af8f2ab upstream. * Use the buffer content length as opposed to the total buffer size. This can be a real problem when using the mos7840 as a usb serial-console as all kernel output is truncated during boot. Signed-off-by: Mark Ferrell Signed-off-by: Greg Kroah-Hartman

USB: ftdi_sio: Add VID/PID for Kondo Serial USB

2012-08-26T02:31:44+00:00

commit 7724a1edbe463b06d4e7831a41149ba095b16c53 upstream. This adds VID/PID for Kondo Kagaku Co. Ltd. Serial USB Adapter interface: http://www.kondo-robot.com/EN/wp/?cat=28 Tested by controlling an RCB3 board using libRCB3. Signed-off-by: Ozan Çağlayan Signed-off-by: Greg Kroah-Hartman

USB: option: add ZTE K5006-Z

2012-08-26T02:31:44+00:00

commit f1b5c997e68533df1f96dcd3068a231bca495603 upstream. The ZTE (Vodafone) K5006-Z use the following interface layout: 00 DIAG 01 secondary 02 modem 03 networkcard 04 storage Ignoring interface #3 which is handled by the qmi_wwan driver. Signed-off-by: Bjørn Mork Cc: Thomas Schäfer Signed-off-by: Greg Kroah-Hartman

USB: support the new interfaces of Huawei Data Card devices in option driver

2012-08-26T02:31:43+00:00

commit ee6f827df9107139e8960326e49e1376352ced4d upstream. In this patch, we add new declarations into option.c to support the new interfaces of Huawei Data Card devices. And at the same time, remove the redundant declarations from option.c. Signed-off-by: fangxiaozhi Signed-off-by: Greg Kroah-Hartman

staging: comedi: Fix reversed test in comedi_device_attach()

2012-08-26T02:31:43+00:00

commit 80eb7a506fdcea08f86c9dfc7c638303bf02a3c8 upstream. Commit 3902a370281d2f2b130f141e8cf94eab40125769 (staging: comedi: refactor comedi_device_attach() a bit) by yours truly introduced an inverted logic bug in comedi_device_attach() for the case where the driver expects the device to be configured by driver name rather than board name. The result of a strcmp() is being tested incorrectly. Fix it. Thanks to Stephen N Chivers for discovering the bug and suggesting the fix. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman

drivers-core: make structured logging play nice with dynamic-debug

2012-08-26T02:31:43+00:00

commit af7f2158fdee9d7f55b793b09f8170a3391f889a upstream. commit c4e00daaa96d3a0786f1f4fe6456281c60ef9a16 changed __dev_printk in a way that broke dynamic-debug's ability to control the dynamic prefix of dev_dbg(dev,..), but not dev_dbg(NULL,..) or pr_debug(..), which is why it wasnt noticed sooner. When dev==NULL, __dev_printk() just calls printk(), which just works. But otherwise, it assumed that level was always a string like "" and just plucked out the 'L', ignoring the rest. However, dynamic_emit_prefix() adds "[tid] module:func:line:" to the string, those additions all got lost. Signed-off-by: Jim Cromie Acked-by: Jason Baron Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman