kernel/linux.git/drivers, branch v3.4.93

tty/serial: Add support for Altera serial port

2014-06-11T19:04:22+00:00

commit e06c93cacb82dd147266fd1bdb2d0a0bd45ff2c1 upstream. Add support for Altera 8250/16550 compatible serial port. Signed-off-by: Ley Foon Tan [xr: Backported to 3.4: adjust filenames, context] Signed-off-by: Rui Xiang Signed-off-by: Greg Kroah-Hartman

8250/16?50: Add support for Broadcom TruManage redirected serial port

2014-06-11T19:04:22+00:00

commit ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 upstream. Add support for the UART device present in Broadcom TruManage capable NetXtreme chips (ie: 5761m 5762, and 5725). This implementation has a hidden transmit FIFO, so running in single-byte interrupt mode results in too many interrupts. The UART_CAP_HFIFO capability was added to track this. It continues to reload the THR as long as the THRE and TSRE bits are set in the LSR up to a specified limit (1024 is used here). Signed-off-by: Stephen Hurd Signed-off-by: Michael Chan [xr: Backported to 3.4: - Adjust filenames - Adjust context - PORT_BRCM_TRUMANAGE is 22 not 24] Cc: Ben Hutchings Signed-off-by: Rui Xiang Signed-off-by: Greg Kroah-Hartman

Fix 4 port and add support for 8 port 'Unknown' PCI serial port cards

2014-06-11T19:04:21+00:00

commit d13402a4a944e72612a9ec5c9190e35717c02a9d upstream. I've managed to find an 8 port version of the card 4 port card which was discussed here: http://marc.info/?l=linux-serial&m=120760744205314&w=2 Looking back at that thread there were two issues in the original patch. 1) The I/O ports for the UARTs are within BAR2 not BAR0. This can been seen in the original post. 2) A serial quirk isn't needed as these cards have no memory in BAR0 which makes pci_plx9050_init just return. This patch fixes the 4 port support to use BAR2, removes the bogus quirk and adds support for the 8 port card. $ lspci -vvv -n -s 00:08.0 00:08.0 0780: 10b5:9050 (rev 01) Subsystem: 10b5:1588 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: serial $ dmesg | grep 0000:00:08.0: [ 0.083320] pci 0000:00:08.0: [10b5:9050] type 0 class 0x000780 [ 0.083355] pci 0000:00:08.0: reg 14: [io 0xff00-0xff7f] [ 0.083369] pci 0000:00:08.0: reg 18: [io 0xfe00-0xfe3f] [ 0.083382] pci 0000:00:08.0: reg 1c: [io 0xfd00-0xfd07] [ 0.083460] pci 0000:00:08.0: PME# supported from D0 D3hot [ 1.212867] 0000:00:08.0: ttyS4 at I/O 0xfe00 (irq = 17) is a 16550A [ 1.233073] 0000:00:08.0: ttyS5 at I/O 0xfe08 (irq = 17) is a 16550A [ 1.253270] 0000:00:08.0: ttyS6 at I/O 0xfe10 (irq = 17) is a 16550A [ 1.273468] 0000:00:08.0: ttyS7 at I/O 0xfe18 (irq = 17) is a 16550A [ 1.293666] 0000:00:08.0: ttyS8 at I/O 0xfe20 (irq = 17) is a 16550A [ 1.313863] 0000:00:08.0: ttyS9 at I/O 0xfe28 (irq = 17) is a 16550A [ 1.334061] 0000:00:08.0: ttyS10 at I/O 0xfe30 (irq = 17) is a 16550A [ 1.354258] 0000:00:08.0: ttyS11 at I/O 0xfe38 (irq = 17) is a 16550A Signed-off-by: Scott Ashcroft [xr: Backported to 3.4: adjust context] Signed-off-by: Rui Xiang Signed-off-by: Greg Kroah-Hartman

tty: Correct tty buffer flush.

2014-06-11T19:04:21+00:00

commit 64325a3be08d364a62ee8f84b2cf86934bc2544a upstream. The root of problem is carelessly zeroing pointer(in function __tty_buffer_flush()), when another thread can use it. It can be cause of "NULL pointer dereference". Main idea of the patch, this is never free last (struct tty_buffer) in the active buffer. Only flush the data for ldisc(buf->head->read = buf->head->commit). At that moment driver can collect(write) data in buffer without conflict. It is repeat behavior of flush_to_ldisc(), only without feeding data to ldisc. Signed-off-by: Ilya Zykov Signed-off-by: Ben Hutchings Cc: Rui Xiang Signed-off-by: Greg Kroah-Hartman

serial: pch_uart: fix tty-kref leak in rx-error path

2014-06-11T19:04:21+00:00

commit fc0919c68cb2f75bb1af759315f9d7e2a9443c28 upstream. Fix tty-kref leak introduced by commit 384e301e ("pch_uart: fix a deadlock when pch_uart as console") which never put its tty reference. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ben Hutchings Cc: Rui Xiang Signed-off-by: Greg Kroah-Hartman

serial: pch_uart: fix tty-kref leak in dma-rx path

2014-06-11T19:04:21+00:00

commit 19b85cfb190eb9980eaf416bff96aef4159a430e upstream. Fix tty_kref leak when tty_buffer_request room fails in dma-rx path. Note that the tty ref isn't really needed anymore, but as the leak has always been there, fixing it before removing should makes it easier to backport the fix. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings Cc: Rui Xiang Signed-off-by: Greg Kroah-Hartman

target/file: Fix 32-bit highmem breakage for SGL -> iovec mapping

2014-06-11T19:04:21+00:00

commit 40ff2c3b3da35dd3a00ac6722056a59b4b3f2caf upstream. This patch changes vectored file I/O to use kmap + kunmap when mapping incoming SGL memory -> struct iovec in order to properly support 32-bit highmem configurations. This is because an extra bounce buffer may be required when processing scatterlist pages allocated with GFP_KERNEL. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Bellinger [bwh: Backported to 3.2: use task->task_sg{,_nents} for iteration] Signed-off-by: Ben Hutchings Cc: Rui Xiang Signed-off-by: Greg Kroah-Hartman

target: use correct sense code for LUN communication failure

2014-06-11T19:04:21+00:00

commit 18a9df42d53fabfa43b78be1104838cc8b9762e1 upstream. The ASC/ASCQ code for 'Logical Unit Communication failure' is 0x08/0x00; 0x80/0x00 is vendor specific. Signed-off-by: Hannes Reinecke Cc: Nicholas Bellinger Signed-off-by: Nicholas Bellinger [bwh: Backported to 3.2: add offset to buffer index] Signed-off-by: Ben Hutchings Cc: Rui Xiang Signed-off-by: Greg Kroah-Hartman

target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits

2014-06-11T19:04:20+00:00

commit ba539743b70cd160c84bab1c82910d0789b820f8 upstream. This patch fixes the MAINTENANCE_IN service action type checks to only look at the proper lower 5 bits of cdb byte 1. This addresses the case where MI_REPORT_TARGET_PGS w/ extended header using the upper three bits of cdb byte 1 was not processed correctly in transport_generic_cmd_sequencer, as well as the three cases for standby, unavailable, and transition ALUA primary access state checks. Also add MAINTENANCE_IN to the excluded list in transport_generic_prepare_cdb() to prevent the PARAMETER DATA FORMAT bits from being cleared. Cc: Hannes Reinecke Cc: Rob Evers Cc: Christoph Hellwig Cc: Roland Dreier Signed-off-by: Nicholas Bellinger Signed-off-by: Ben Hutchings Cc: Rui Xiang Signed-off-by: Greg Kroah-Hartman

target/pscsi: fix return value check

2014-06-11T19:04:20+00:00

commit 58932e96e438cd78f75e765d7b87ef39d3533d15 upstream. In case of error, the function scsi_host_lookup() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun Signed-off-by: Nicholas Bellinger [bwh: Backported to 3.2: pscsi_configure_device() returns a pointer] Signed-off-by: Ben Hutchings Cc: Rui Xiang Signed-off-by: Greg Kroah-Hartman