kernel/linux.git/drivers, branch v3.4.85

xhci: Fix resume issues on Renesas chips in Samsung laptops

2014-03-31T04:40:31+00:00

commit 1aa9578c1a9450fb21501c4f549f5b1edb557e6d upstream. Don Zickus writes: Some co-workers of mine bought Samsung laptops that had mostly usb3 ports. Those ports did not resume correctly (the driver would timeout communicating and fail). This led to frustration as suspend/resume is a common use for laptops. Poking around, I applied the reset on resume quirk to this chipset and the resume started working. Reloading the xhci_hcd module had been the temporary workaround. Signed-off-by: Sarah Sharp Reported-by: Don Zickus Tested-by: Prarit Bhargava Signed-off-by: Greg Kroah-Hartman

Input: elantech - improve clickpad detection

2014-03-31T04:40:30+00:00

commit c15bdfd5b9831e4cab8cfc118243956e267dd30e upstream. The current assumption in the elantech driver that hw version 3 touchpads are never clickpads and hw version 4 touchpads are always clickpads is wrong. There are several bug reports for this, ie: https://bugzilla.redhat.com/show_bug.cgi?id=1030802 http://superuser.com/questions/619582/right-elantech-touchpad-button-not-working-in-linux I've spend a couple of hours wading through various bugzillas, launchpads and forum posts to create a list of fw-versions and capabilities for different laptop models to find a good method to differentiate between clickpads and versions with separate hardware buttons. Which shows that a device being a clickpad is reliable indicated by bit 12 being set in the fw_version. I've included the gathered list inside the driver, so that we've this info at hand if we need to revisit this later. Signed-off-by: Hans de Goede Reviewed-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov Cc: Josh Boyer Signed-off-by: Greg Kroah-Hartman

i7300_edac: Fix device reference count

2014-03-31T04:40:30+00:00

commit 75135da0d68419ef8a925f4c1d5f63d8046e314d upstream. pci_get_device() decrements the reference count of "from" (last argument) so when we break off the loop successfully we have only one device reference - and we don't know which device we have. If we want a reference to each device, we must take them explicitly and let the pci_get_device() walk complete to avoid duplicate references. This is serious, as over-putting device references will cause the device to eventually disappear. Without this fix, the kernel crashes after a few insmod/rmmod cycles. Tested on an Intel S7000FC4UR system with a 7300 chipset. Signed-off-by: Jean Delvare Link: http://lkml.kernel.org/r/20140224111656.09bbb7ed@endymion.delvare Cc: Mauro Carvalho Chehab Cc: Doug Thompson Cc: stable@vger.kernel.org Signed-off-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman

p54: clamp properly instead of just truncating

2014-03-31T04:40:30+00:00

commit 608cfbe4abaf76e9d732efd7ed1cfa3998163d91 upstream. The call to clamp_t() first truncates the variable signed 8 bit and as a result, the actual clamp is a no-op. Fixes: 0d78156eef1d ('p54: improve site survey') Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

iwlwifi: Complete backport of "iwlwifi: always copy first 16 bytes of commands"

2014-03-31T04:40:30+00:00

Linux 3.4.83 included an incomplete backport of commit 8a964f44e01ad3bbc208c3e80d931ba91b9ea786 ('iwlwifi: always copy first 16 bytes of commands') which causes a regression for this driver. This is the missing piece. Reported-by: Andreas Sturmlechner Cc: Johannes Berg Cc: Emmanuel Grumbach Cc: Jianguo Wu Cc: Andres Bertens Tested-by: Andreas Sturmlechner Signed-off-by: Ben Hutchings

SCSI: storvsc: NULL pointer dereference fix

2014-03-24T04:37:08+00:00

commit b12bb60d6c350b348a4e1460cd68f97ccae9822e upstream. If the initialization of storvsc fails, the storvsc_device_destroy() causes NULL pointer dereference. storvsc_bus_scan() scsi_scan_target() __scsi_scan_target() scsi_probe_and_add_lun(hostdata=NULL) scsi_alloc_sdev(hostdata=NULL) sdev->hostdata = hostdata now the host allocation fails __scsi_remove_device(sdev) calls sdev->host->hostt->slave_destroy() == storvsc_device_destroy(sdev) access of sdev->hostdata->request_mempool Signed-off-by: Ales Novak Signed-off-by: Thomas Abraham Reviewed-by: Jiri Kosina Acked-by: K. Y. Srinivasan Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

SCSI: qla2xxx: Poll during initialization for ISP25xx and ISP83xx

2014-03-24T04:37:07+00:00

commit b77ed25c9f8402e8b3e49e220edb4ef09ecfbb53 upstream. Signed-off-by: Giridhar Malavali Signed-off-by: Saurav Kashyap Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

SCSI: isci: correct erroneous for_each_isci_host macro

2014-03-24T04:37:07+00:00

commit c59053a23d586675c25d789a7494adfdc02fba57 upstream. In the first place, the loop 'for' in the macro 'for_each_isci_host' (drivers/scsi/isci/host.h:314) is incorrect, because it accesses the 3rd element of 2 element array. After the 2nd iteration it executes the instruction: ihost = to_pci_info(pdev)->hosts[2] (while the size of the 'hosts' array equals 2) and reads an out of range element. In the second place, this loop is incorrectly optimized by GCC v4.8 (see http://marc.info/?l=linux-kernel&m=138998871911336&w=2). As a result, on platforms with two SCU controllers, the loop is executed more times than it can be (for i=0,1 and 2). It causes kernel panic during entering the S3 state and the following oops after 'rmmod isci': BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] __list_add+0x1b/0xc0 Oops: 0000 [#1] SMP RIP: 0010:[] [] __list_add+0x1b/0xc0 Call Trace: [] __mutex_lock_slowpath+0x114/0x1b0 [] mutex_lock+0x1f/0x30 [] sas_disable_events+0x1b/0x50 [libsas] [] sas_unregister_ha+0x18/0x60 [libsas] [] isci_unregister+0x1e/0x40 [isci] [] isci_pci_remove+0x5d/0x100 [isci] [] pci_device_remove+0x3b/0xb0 [] __device_release_driver+0x7f/0xf0 [] driver_detach+0xa8/0xb0 [] bus_remove_driver+0x9b/0x120 [] driver_unregister+0x2c/0x50 [] pci_unregister_driver+0x23/0x80 [] isci_exit+0x10/0x1e [isci] [] SyS_delete_module+0x16b/0x2d0 [] ? do_notify_resume+0x61/0xa0 [] system_call_fastpath+0x16/0x1b The loop has been corrected. This patch fixes kernel panic during entering the S3 state and the above oops. Signed-off-by: Lukasz Dorau Reviewed-by: Maciej Patelczyk Tested-by: Lukasz Dorau Signed-off-by: Dan Williams Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

SCSI: isci: fix reset timeout handling

2014-03-24T04:37:07+00:00

commit ddfadd7736b677de2d4ca2cd5b4b655368c85a7a upstream. Remove an erroneous BUG_ON() in the case of a hard reset timeout. The reset timeout handler puts the port into the "awaiting link-up" state. The timeout causes the device to be disconnected and we need to be in the awaiting link-up state to re-connect the port. The BUG_ON() made the incorrect assumption that resets never timeout and we always complete the reset in the "resetting" state. Testing this patch also uncovered that libata continues to attempt to reset the port long after the driver has torn down the context. Once the driver has committed to abandoning the link it must indicate to libata that recovery ends by returning -ENODEV from ->lldd_I_T_nexus_reset(). Acked-by: Lukasz Dorau Reported-by: David Milburn Reported-by: Xun Ni Tested-by: Xun Ni Signed-off-by: Dan Williams Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails

2014-03-24T04:37:07+00:00

commit 7e9e148af01ef388efb6e2490805970be4622792 upstream. If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed, this patch adds the missing cleanup. Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman